pluto_hdl_adi/library/common/up_axi.v

286 lines
8.5 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module up_axi (
// reset and clocks
up_rstn,
up_clk,
// axi4 interface
up_axi_awvalid,
up_axi_awaddr,
up_axi_awready,
up_axi_wvalid,
up_axi_wdata,
up_axi_wstrb,
up_axi_wready,
up_axi_bvalid,
up_axi_bresp,
up_axi_bready,
up_axi_arvalid,
up_axi_araddr,
up_axi_arready,
up_axi_rvalid,
up_axi_rresp,
up_axi_rdata,
up_axi_rready,
// pcore interface
up_wreq,
up_waddr,
up_wdata,
up_wack,
up_rreq,
up_raddr,
up_rdata,
up_rack);
// parameters
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
parameter ADDRESS_WIDTH = 14;
localparam AW = ADDRESS_WIDTH - 1;
// reset and clocks
input up_rstn;
input up_clk;
// axi4 interface
input up_axi_awvalid;
input [31:0] up_axi_awaddr;
output up_axi_awready;
input up_axi_wvalid;
input [31:0] up_axi_wdata;
input [ 3:0] up_axi_wstrb;
output up_axi_wready;
output up_axi_bvalid;
output [ 1:0] up_axi_bresp;
input up_axi_bready;
input up_axi_arvalid;
input [31:0] up_axi_araddr;
output up_axi_arready;
output up_axi_rvalid;
output [ 1:0] up_axi_rresp;
output [31:0] up_axi_rdata;
input up_axi_rready;
// pcore interface
output up_wreq;
output [AW:0] up_waddr;
output [31:0] up_wdata;
input up_wack;
output up_rreq;
output [AW:0] up_raddr;
input [31:0] up_rdata;
input up_rack;
// internal registers
reg up_axi_awready = 'd0;
reg up_axi_wready = 'd0;
reg up_axi_bvalid = 'd0;
reg up_wsel = 'd0;
reg up_wreq = 'd0;
reg [AW:0] up_waddr = 'd0;
reg [31:0] up_wdata = 'd0;
reg [ 2:0] up_wcount = 'd0;
reg up_wack_int = 'd0;
reg up_axi_arready = 'd0;
reg up_axi_rvalid = 'd0;
reg [31:0] up_axi_rdata = 'd0;
reg up_rsel = 'd0;
reg up_rreq = 'd0;
reg [AW:0] up_raddr = 'd0;
reg [ 3:0] up_rcount = 'd0;
reg up_rack_int = 'd0;
reg [31:0] up_rdata_int = 'd0;
reg up_rack_int_d = 'd0;
reg [31:0] up_rdata_int_d = 'd0;
// write channel interface
assign up_axi_bresp = 2'd0;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_axi_awready <= 'd0;
up_axi_wready <= 'd0;
up_axi_bvalid <= 'd0;
end else begin
if (up_axi_awready == 1'b1) begin
up_axi_awready <= 1'b0;
end else if (up_wack_int == 1'b1) begin
up_axi_awready <= 1'b1;
end
if (up_axi_wready == 1'b1) begin
up_axi_wready <= 1'b0;
end else if (up_wack_int == 1'b1) begin
up_axi_wready <= 1'b1;
end
if ((up_axi_bready == 1'b1) && (up_axi_bvalid == 1'b1)) begin
up_axi_bvalid <= 1'b0;
end else if (up_wack_int == 1'b1) begin
up_axi_bvalid <= 1'b1;
end
end
end
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_wsel <= 'd0;
up_wreq <= 'd0;
up_waddr <= 'd0;
up_wdata <= 'd0;
up_wcount <= 'd0;
end else begin
if (up_wsel == 1'b1) begin
if ((up_axi_bready == 1'b1) && (up_axi_bvalid == 1'b1)) begin
up_wsel <= 1'b0;
end
up_wreq <= 1'b0;
up_waddr <= up_waddr;
up_wdata <= up_wdata;
up_wcount <= up_wcount + 1'b1;
end else begin
up_wsel <= up_axi_awvalid & up_axi_wvalid;
up_wreq <= up_axi_awvalid & up_axi_wvalid;
up_waddr <= up_axi_awaddr[AW+2:2];
up_wdata <= up_axi_wdata;
up_wcount <= 3'd0;
end
end
end
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_wack_int <= 'd0;
end else begin
if ((up_wcount == 3'h7) && (up_wack == 1'b0)) begin
up_wack_int <= 1'b1;
end else if (up_wsel == 1'b1) begin
up_wack_int <= up_wack;
end
end
end
// read channel interface
assign up_axi_rresp = 2'd0;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_axi_arready <= 'd0;
up_axi_rvalid <= 'd0;
up_axi_rdata <= 'd0;
end else begin
if (up_axi_arready == 1'b1) begin
up_axi_arready <= 1'b0;
end else if (up_rack_int == 1'b1) begin
up_axi_arready <= 1'b1;
end
if ((up_axi_rready == 1'b1) && (up_axi_rvalid == 1'b1)) begin
up_axi_rvalid <= 1'b0;
up_axi_rdata <= 32'd0;
end else if (up_rack_int_d == 1'b1) begin
up_axi_rvalid <= 1'b1;
up_axi_rdata <= up_rdata_int_d;
end
end
end
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_rsel <= 'd0;
up_rreq <= 'd0;
up_raddr <= 'd0;
up_rcount <= 'd0;
end else begin
if (up_rsel == 1'b1) begin
if ((up_axi_rready == 1'b1) && (up_axi_rvalid == 1'b1)) begin
up_rsel <= 1'b0;
end
up_rreq <= 1'b0;
up_raddr <= up_raddr;
end else begin
up_rsel <= up_axi_arvalid;
up_rreq <= up_axi_arvalid;
up_raddr <= up_axi_araddr[AW+2:2];
end
if (up_rack_int == 1'b1) begin
up_rcount <= 4'd0;
end else if (up_rcount[3] == 1'b1) begin
up_rcount <= up_rcount + 1'b1;
end else if (up_rreq == 1'b1) begin
up_rcount <= 4'd8;
end
end
end
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_rack_int <= 'd0;
up_rdata_int <= 'd0;
up_rack_int_d <= 'd0;
up_rdata_int_d <= 'd0;
end else begin
if ((up_rcount == 4'hf) && (up_rack == 1'b0)) begin
up_rack_int <= 1'b1;
up_rdata_int <= {2{16'hdead}};
end else begin
up_rack_int <= up_rack;
up_rdata_int <= up_rdata;
end
up_rack_int_d <= up_rack_int;
up_rdata_int_d <= up_rdata_int;
end
end
endmodule
// ***************************************************************************
// ***************************************************************************