zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/jesd204/tb/loopback_tb.v

449 lines
15 KiB
Coq
Raw Normal View History

Add copyright & license for all files needing ADI JESD specific license * Added every year when the file was edited, with comma * Range if it's consecutive years Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-08-18 07:55:04 +00:00
// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2017-2022 Analog Devices, Inc. All rights reserved.
// SPDX short identifier: ADIJESD204
// ***************************************************************************
// ***************************************************************************
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
Add missing timescale annotations For consistent simulation behavior it is recommended to annotate all source files with a timescale. Add it to those where it is currently missing. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-08-27 07:14:54 +00:00
`timescale 1ns/100ps
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
module loopback_tb;
parameter VCD_FILE = "loopback_tb.vcd";
parameter NUM_LANES = 4;
jesd204:tb: Update test bench to support dynamic multi-link on TX side
2018-03-29 11:50:35 +00:00
parameter NUM_LINKS = 1;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
parameter OCTETS_PER_FRAME = 1;
parameter FRAMES_PER_MULTIFRAME = 28;
parameter NUM_CONVERTERS = 1;
parameter N = 16;
parameter NP = 16;
parameter HIGH_DENSITY = 1'b0;
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
parameter ENABLE_SCRAMBLER = 1;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
parameter BUFFER_EARLY_RELEASE = 1;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
parameter SYSREF_DISABLE = 0;
parameter SYSREF_ONE_SHOT = 0;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
parameter LANE_DELAY = 1;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
parameter DATA_PATH_WIDTH = 4;
parameter DATA_RANDOM = ENABLE_SCRAMBLER ? 0 : 1;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
localparam DPW_LOG2 = DATA_PATH_WIDTH == 8 ? 3 : DATA_PATH_WIDTH == 4 ? 2 : 1;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
localparam BEATS_PER_MULTIFRAME = OCTETS_PER_FRAME * FRAMES_PER_MULTIFRAME / 4;
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
localparam TX_LATENCY = 4 + i_tx.NUM_OUTPUT_PIPELINE;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire [31:0] RX_LATENCY = 3 + i_rx.CHAR_INFO_REGISTERED + i_rx.ALIGN_MUX_REGISTERED + i_rx.SCRAMBLER_REGISTERED;
wire [31:0] BASE_LATENCY = TX_LATENCY + RX_LATENCY;
localparam SYSREF_HALF_COUNT = OCTETS_PER_FRAME * FRAMES_PER_MULTIFRAME;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
`define TIMEOUT 1000000
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
`include "tb_base.v"
reg [5:0] tx_counter = 'h00;
reg [5:0] rx_counter = 'h00;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
reg [NUM_LANES*DATA_PATH_WIDTH*8-1:0] rx_mask = 64'hffffffffffff0000;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
wire tx_ready;
wire rx_valid;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire [NUM_LANES*DATA_PATH_WIDTH*8-1:0] rx_data;
wire [DATA_PATH_WIDTH-1:0] rx_eof;
wire [DATA_PATH_WIDTH-1:0] rx_sof;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
reg data_mismatch = 1'b1;
jesd204/tb: support for ModelSim and Xsim Adding support for ModelSim and Vivado Xsim. Usage: export SIMULATOR=modelsim or export SIMULATOR=xsim
2019-01-18 14:16:37 +00:00
wire [NUM_LINKS-1:0] sync;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
always @(posedge clk) begin
if (sync == 1'b0) begin
tx_counter <= 'h00000000;
end else if (tx_ready == 1'b1) begin
tx_counter <= tx_counter + 1'b1;
end
end
always @(posedge clk) begin
if (sync == 1'b0) begin
rx_counter <= 'h00000000;
if (ENABLE_SCRAMBLER == 1'b1) begin
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
rx_mask <= {NUM_LANES{64'hffffffffffff0000}}; // First two octets are invalid due to scrambling
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
end else begin
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
rx_mask <= {NUM_LANES{64'hffffffffffffffff}};
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
end
end else if (rx_valid == 1'b1) begin
rx_counter <= rx_counter + 1'b1;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
rx_mask <= {NUM_LANES{64'hffffffffffffffff}};
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
end
end
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
reg [(DATA_PATH_WIDTH*8)-1:0] tx_random_data;
wire [(DATA_PATH_WIDTH*8)-1:0] tx_data;
wire [(DATA_PATH_WIDTH*8)-1:0] rx_ref_data;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
genvar ii;
generate
for(ii = 0; ii < DATA_PATH_WIDTH; ii=ii+1) begin : data_gen
wire [1:0] ii_sig = ii;
always @(posedge clk) begin
tx_random_data[ii*8+:8] <= $urandom();
end
assign tx_data[ii*8+:8] = DATA_RANDOM ? tx_random_data[ii*8+:8] : {tx_counter, ii_sig};
assign rx_ref_data[ii*8+:8] = {rx_counter, ii_sig};
end
endgenerate
wire [NUM_LANES*DATA_PATH_WIDTH*8-1:0] phy_data_out;
wire [NUM_LANES*DATA_PATH_WIDTH-1:0] phy_charisk_out;
wire [NUM_LANES*DATA_PATH_WIDTH*8-1:0] phy_data_in;
wire [NUM_LANES*DATA_PATH_WIDTH-1:0] phy_charisk_in;
reg [9:0] sysref_counter = 'h00;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
reg sysref_rx = 1'b0;
reg sysref_tx = 1'b0;
always @(posedge clk) begin
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
if (sysref_counter == (SYSREF_HALF_COUNT-1)) begin
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
sysref_rx <= ~sysref_rx;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
sysref_counter <= 'b0;
end else begin
sysref_counter <= sysref_counter + 1'b1;
end
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
sysref_tx <= sysref_rx;
end
localparam MAX_LANE_DELAY = LANE_DELAY + NUM_LANES;
reg [10:0] phy_delay_fifo_wr;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
reg [DATA_PATH_WIDTH*9*NUM_LANES-1:0] phy_delay_fifo[0:MAX_LANE_DELAY-1];
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
always @(posedge clk) begin
phy_delay_fifo[phy_delay_fifo_wr] <= {phy_charisk_out,phy_data_out};
if (reset == 1'b1 || phy_delay_fifo_wr == MAX_LANE_DELAY-1) begin
phy_delay_fifo_wr <= 'h00;
end else begin
phy_delay_fifo_wr <= phy_delay_fifo_wr + 1'b1;
end
end
genvar i;
generate for (i = 0; i < NUM_LANES; i = i + 1) begin
localparam OFF = MAX_LANE_DELAY - (i + LANE_DELAY);
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
assign phy_data_in[DATA_PATH_WIDTH*8*i+(DATA_PATH_WIDTH*8)-1:DATA_PATH_WIDTH*8*i] =
phy_delay_fifo[(phy_delay_fifo_wr + OFF) % MAX_LANE_DELAY][DATA_PATH_WIDTH*8*i+(DATA_PATH_WIDTH*8)-1:DATA_PATH_WIDTH*8*i];
assign phy_charisk_in[DATA_PATH_WIDTH*i+DATA_PATH_WIDTH-1:DATA_PATH_WIDTH*i] =
phy_delay_fifo[(phy_delay_fifo_wr + OFF) % MAX_LANE_DELAY][DATA_PATH_WIDTH*i+DATA_PATH_WIDTH-1+NUM_LANES*DATA_PATH_WIDTH*8:DATA_PATH_WIDTH*i+DATA_PATH_WIDTH*8*NUM_LANES];
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
end endgenerate
wire [NUM_LANES-1:0] tx_cfg_lanes_disable;
jesd204:tb: Update test bench to support dynamic multi-link on TX side
2018-03-29 11:50:35 +00:00
wire [NUM_LINKS-1:0] tx_cfg_links_disable;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire [9:0] tx_cfg_octets_per_multiframe;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
wire [7:0] tx_cfg_octets_per_frame;
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
wire [7:0] tx_device_cfg_lmfc_offset;
wire [9:0] tx_device_cfg_octets_per_multiframe;
wire [7:0] tx_device_cfg_octets_per_frame;
wire [7:0] tx_device_cfg_beats_per_multiframe;
wire tx_device_cfg_sysref_disable;
wire tx_device_cfg_sysref_oneshot;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
wire tx_cfg_continuous_cgs;
wire tx_cfg_continuous_ilas;
wire tx_cfg_skip_ilas;
wire [7:0] tx_cfg_mframes_per_ilas;
wire tx_cfg_disable_char_replacement;
wire tx_cfg_disable_scrambler;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire tx_lmfc_edge;
wire tx_lmfc_clk;
wire [DATA_PATH_WIDTH-1:0] tx_eof;
wire [DATA_PATH_WIDTH-1:0] tx_sof;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
wire tx_ilas_config_rd;
wire [1:0] tx_ilas_config_addr;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire [DATA_PATH_WIDTH*8*NUM_LANES-1:0] tx_ilas_config_data;
wire tx_event_sysref_edge;
wire tx_event_sysref_alignment_error;
wire [NUM_LINKS-1:0] tx_status_sync;
wire [1:0] tx_status_state;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204_tx_static_config #(
.NUM_LANES(NUM_LANES),
jesd204:tb: Update test bench to support dynamic multi-link on TX side
2018-03-29 11:50:35 +00:00
.NUM_LINKS(NUM_LINKS),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.OCTETS_PER_FRAME(OCTETS_PER_FRAME),
.FRAMES_PER_MULTIFRAME(FRAMES_PER_MULTIFRAME),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.NUM_CONVERTERS(NUM_CONVERTERS),
.N(N),
.NP(NP),
.HIGH_DENSITY(HIGH_DENSITY),
.SCR(ENABLE_SCRAMBLER),
.LINK_MODE(1),
.SYSREF_DISABLE(SYSREF_DISABLE),
.SYSREF_ONE_SHOT(SYSREF_ONE_SHOT),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.DATA_PATH_WIDTH(DATA_PATH_WIDTH),
.TPL_DATA_PATH_WIDTH(DATA_PATH_WIDTH)
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
) i_tx_cfg (
.clk(clk),
.cfg_lanes_disable(tx_cfg_lanes_disable),
jesd204:tb: Update test bench to support dynamic multi-link on TX side
2018-03-29 11:50:35 +00:00
.cfg_links_disable(tx_cfg_links_disable),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.cfg_octets_per_multiframe(tx_cfg_octets_per_multiframe),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.cfg_octets_per_frame(tx_cfg_octets_per_frame),
.cfg_continuous_cgs(tx_cfg_continuous_cgs),
.cfg_continuous_ilas(tx_cfg_continuous_ilas),
.cfg_skip_ilas(tx_cfg_skip_ilas),
.cfg_mframes_per_ilas(tx_cfg_mframes_per_ilas),
.cfg_disable_char_replacement(tx_cfg_disable_char_replacement),
.cfg_disable_scrambler(tx_cfg_disable_scrambler),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.device_cfg_octets_per_multiframe(tx_device_cfg_octets_per_multiframe),
.device_cfg_octets_per_frame(tx_device_cfg_octets_per_frame),
.device_cfg_beats_per_multiframe(tx_device_cfg_beats_per_multiframe),
.device_cfg_lmfc_offset(tx_device_cfg_lmfc_offset),
.device_cfg_sysref_disable(tx_device_cfg_sysref_disable),
.device_cfg_sysref_oneshot(tx_device_cfg_sysref_oneshot),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.ilas_config_rd(tx_ilas_config_rd),
.ilas_config_addr(tx_ilas_config_addr),
libraries: Update modules according to guideline * Added header license for the files that didn't have * Modified parentheses * Removed extra spaces at the end of lines * Fixed parameters list to be each parameter on its line * Deleted lines after endmodule and consecutive empty lines * Fixed indentation Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-04-08 10:21:52 +00:00
.ilas_config_data(tx_ilas_config_data));
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204_tx #(
jesd204:tb: Update test bench to support dynamic multi-link on TX side
2018-03-29 11:50:35 +00:00
.NUM_LANES(NUM_LANES),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.NUM_LINKS(NUM_LINKS),
.NUM_OUTPUT_PIPELINE(0),
.LINK_MODE(1),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.DATA_PATH_WIDTH(DATA_PATH_WIDTH),
.TPL_DATA_PATH_WIDTH(DATA_PATH_WIDTH),
.ASYNC_CLK(0),
.ENABLE_CHAR_REPLACE(1)
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
) i_tx (
.clk(clk),
.reset(reset),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.device_clk(clk),
.device_reset(reset),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.phy_data(phy_data_out),
.phy_charisk(phy_charisk_out),
.phy_header(),
.sysref(sysref_tx),
.lmfc_edge(tx_lmfc_edge),
.lmfc_clk(tx_lmfc_clk),
.sync(sync),
.tx_data({NUM_LANES{tx_data}}),
.tx_ready(tx_ready),
.tx_eof(tx_eof),
.tx_sof(tx_sof),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.tx_somf(),
.tx_eomf(),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.tx_valid(1'b1),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.cfg_lanes_disable(tx_cfg_lanes_disable),
jesd204:tb: Update test bench to support dynamic multi-link on TX side
2018-03-29 11:50:35 +00:00
.cfg_links_disable(tx_cfg_links_disable),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.cfg_octets_per_multiframe(tx_cfg_octets_per_multiframe),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.cfg_octets_per_frame(tx_cfg_octets_per_frame),
.cfg_continuous_cgs(tx_cfg_continuous_cgs),
.cfg_continuous_ilas(tx_cfg_continuous_ilas),
.cfg_skip_ilas(tx_cfg_skip_ilas),
.cfg_mframes_per_ilas(tx_cfg_mframes_per_ilas),
.cfg_disable_char_replacement(tx_cfg_disable_char_replacement),
.cfg_disable_scrambler(tx_cfg_disable_scrambler),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.device_cfg_octets_per_multiframe(tx_device_cfg_octets_per_multiframe),
.device_cfg_octets_per_frame(tx_device_cfg_octets_per_frame),
.device_cfg_beats_per_multiframe(tx_device_cfg_beats_per_multiframe),
.device_cfg_lmfc_offset(tx_device_cfg_lmfc_offset),
.device_cfg_sysref_disable(tx_device_cfg_sysref_disable),
.device_cfg_sysref_oneshot(tx_device_cfg_sysref_oneshot),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.ilas_config_rd(tx_ilas_config_rd),
.ilas_config_addr(tx_ilas_config_addr),
.ilas_config_data(tx_ilas_config_data),
.ctrl_manual_sync_request(1'b0),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.device_event_sysref_edge (tx_event_sysref_edge),
.device_event_sysref_alignment_error (tx_event_sysref_alignment_error),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.status_sync (tx_status_sync),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.status_state (tx_status_state),
.status_synth_params0(),
.status_synth_params1(),
libraries: Update modules according to guideline * Added header license for the files that didn't have * Modified parentheses * Removed extra spaces at the end of lines * Fixed parameters list to be each parameter on its line * Deleted lines after endmodule and consecutive empty lines * Fixed indentation Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-04-08 10:21:52 +00:00
.status_synth_params2());
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
wire [NUM_LANES-1:0] rx_cfg_lanes_disable;
jesd204: Fix loopback testbench The loopback testbench currently fails, because the cfg_links_disable signal is not connected to the RX side of the link. Fix this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-07-19 13:48:46 +00:00
wire [NUM_LINKS-1:0] rx_cfg_links_disable;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire [9:0] rx_cfg_octets_per_multiframe;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
wire [7:0] rx_cfg_octets_per_frame;
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
wire [7:0] rx_device_cfg_lmfc_offset;
wire [9:0] rx_device_cfg_octets_per_multiframe;
wire [7:0] rx_device_cfg_octets_per_frame;
wire [7:0] rx_device_cfg_beats_per_multiframe;
wire rx_device_cfg_sysref_disable;
wire rx_device_cfg_sysref_oneshot;
wire rx_device_cfg_buffer_early_release;
wire [7:0] rx_device_cfg_buffer_delay;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
wire rx_cfg_disable_scrambler;
wire rx_cfg_disable_char_replacement;
wire [NUM_LANES-1:0] rx_status_lane_ifs_ready;
wire [NUM_LANES*14-1:0] rx_status_lane_latency;
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire [NUM_LANES*8-1:0] rx_status_lane_frame_align_err_cnt;
wire [7:0] rx_cfg_frame_align_err_threshold;
wire [32*NUM_LANES-1:0] rx_status_err_statistics_cnt;
wire rx_lmfc_edge;
wire rx_lmfc_clk;
wire rx_event_sysref_alignment_error;
wire rx_event_sysref_edge;
wire [NUM_LANES-1:0] rx_ilas_config_valid;
wire [NUM_LANES*2-1:0] rx_ilas_config_addr;
wire [NUM_LANES*DATA_PATH_WIDTH*8-1:0] rx_ilas_config_data;
wire [1:0] rx_status_ctrl_state;
wire [2*NUM_LANES-1:0] rx_status_lane_cgs_state;
wire rx_phy_en_char_align;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204_rx_static_config #(
.NUM_LANES(NUM_LANES),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.NUM_LINKS(NUM_LINKS),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.OCTETS_PER_FRAME(OCTETS_PER_FRAME),
.FRAMES_PER_MULTIFRAME(FRAMES_PER_MULTIFRAME),
.SCR(ENABLE_SCRAMBLER),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.BUFFER_EARLY_RELEASE(BUFFER_EARLY_RELEASE),
.LINK_MODE(1),
.SYSREF_DISABLE(SYSREF_DISABLE),
.SYSREF_ONE_SHOT(SYSREF_ONE_SHOT),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.DATA_PATH_WIDTH(DATA_PATH_WIDTH),
.TPL_DATA_PATH_WIDTH(DATA_PATH_WIDTH)
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
) i_rx_cfg (
.clk(clk),
.cfg_lanes_disable(rx_cfg_lanes_disable),
jesd204: Fix loopback testbench The loopback testbench currently fails, because the cfg_links_disable signal is not connected to the RX side of the link. Fix this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-07-19 13:48:46 +00:00
.cfg_links_disable(rx_cfg_links_disable),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.cfg_octets_per_multiframe(rx_cfg_octets_per_multiframe),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.cfg_octets_per_frame(rx_cfg_octets_per_frame),
.cfg_disable_scrambler(rx_cfg_disable_scrambler),
.cfg_disable_char_replacement(rx_cfg_disable_char_replacement),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.cfg_frame_align_err_threshold(rx_cfg_frame_align_err_threshold),
.device_cfg_octets_per_multiframe(rx_device_cfg_octets_per_multiframe),
.device_cfg_octets_per_frame(rx_device_cfg_octets_per_frame),
.device_cfg_beats_per_multiframe(rx_device_cfg_beats_per_multiframe),
.device_cfg_lmfc_offset(rx_device_cfg_lmfc_offset),
.device_cfg_sysref_disable(rx_device_cfg_sysref_disable),
.device_cfg_sysref_oneshot(rx_device_cfg_sysref_oneshot),
.device_cfg_buffer_early_release(rx_device_cfg_buffer_early_release),
libraries: Update modules according to guideline * Added header license for the files that didn't have * Modified parentheses * Removed extra spaces at the end of lines * Fixed parameters list to be each parameter on its line * Deleted lines after endmodule and consecutive empty lines * Fixed indentation Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-04-08 10:21:52 +00:00
.device_cfg_buffer_delay(rx_device_cfg_buffer_delay));
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204_rx #(
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.NUM_LANES(NUM_LANES),
.NUM_LINKS(NUM_LINKS),
.NUM_INPUT_PIPELINE(1),
.LINK_MODE(1),
.DATA_PATH_WIDTH(DATA_PATH_WIDTH),
.ENABLE_FRAME_ALIGN_CHECK(1),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.ENABLE_FRAME_ALIGN_ERR_RESET(1),
.TPL_DATA_PATH_WIDTH(DATA_PATH_WIDTH),
.ASYNC_CLK(0),
.ENABLE_CHAR_REPLACE(1)
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
) i_rx (
.clk(clk),
.reset(reset),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.device_clk(clk),
.device_reset(reset),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.phy_data(phy_data_in),
.phy_header({2*NUM_LANES{1'b0}}),
.phy_charisk(phy_charisk_in),
.phy_notintable({NUM_LANES*DATA_PATH_WIDTH{1'b0}}),
.phy_disperr({NUM_LANES*DATA_PATH_WIDTH{1'b0}}),
.phy_block_sync({NUM_LANES{1'b0}}),
.sysref(sysref_rx),
.lmfc_edge(rx_lmfc_edge),
.lmfc_clk(rx_lmfc_clk),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.device_event_sysref_alignment_error(rx_event_sysref_alignment_error),
.device_event_sysref_edge(rx_event_sysref_edge),
.event_frame_alignment_error(),
.event_unexpected_lane_state_error(),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.sync(sync),
.phy_en_char_align(rx_phy_en_char_align),
.rx_data(rx_data),
.rx_valid(rx_valid),
.rx_eof(rx_eof),
.rx_sof(rx_sof),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.rx_eomf(),
.rx_somf(),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.cfg_lanes_disable(rx_cfg_lanes_disable),
jesd204: Fix loopback testbench The loopback testbench currently fails, because the cfg_links_disable signal is not connected to the RX side of the link. Fix this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-07-19 13:48:46 +00:00
.cfg_links_disable(rx_cfg_links_disable),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.cfg_octets_per_multiframe(rx_cfg_octets_per_multiframe),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.cfg_octets_per_frame(rx_cfg_octets_per_frame),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.cfg_disable_char_replacement(rx_cfg_disable_char_replacement),
.cfg_disable_scrambler(rx_cfg_disable_scrambler),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.device_cfg_octets_per_multiframe(rx_device_cfg_octets_per_multiframe),
.device_cfg_octets_per_frame(rx_device_cfg_octets_per_frame),
.device_cfg_beats_per_multiframe(rx_device_cfg_beats_per_multiframe),
.device_cfg_lmfc_offset(rx_device_cfg_lmfc_offset),
.device_cfg_sysref_disable(rx_device_cfg_sysref_disable),
.device_cfg_sysref_oneshot(rx_device_cfg_sysref_oneshot),
.device_cfg_buffer_early_release(rx_device_cfg_buffer_early_release),
.device_cfg_buffer_delay(rx_device_cfg_buffer_delay),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.ctrl_err_statistics_reset(1'b0),
.ctrl_err_statistics_mask(7'b0),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.cfg_frame_align_err_threshold(rx_cfg_frame_align_err_threshold),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.status_err_statistics_cnt(rx_status_err_statistics_cnt),
.ilas_config_valid(rx_ilas_config_valid),
.ilas_config_addr(rx_ilas_config_addr),
.ilas_config_data(rx_ilas_config_data),
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.status_ctrl_state(rx_status_ctrl_state),
.status_lane_cgs_state(rx_status_lane_cgs_state),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
.status_lane_ifs_ready(rx_status_lane_ifs_ready),
jesd204_rx: Add RX frame alignment character check Add support for RX frame alignment character checking when scrambling is enabled and for link reset on misalignment. Add support for xcelium simulator to jesd204/tb
2020-01-29 14:41:43 +00:00
.status_lane_latency(rx_status_lane_latency),
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
.status_lane_emb_state(),
jesd204/tb: Update testbenches
2020-12-07 12:16:30 +00:00
.status_lane_frame_align_err_cnt(rx_status_lane_frame_align_err_cnt),
.status_synth_params0(),
.status_synth_params1(),
libraries: Update modules according to guideline * Added header license for the files that didn't have * Modified parentheses * Removed extra spaces at the end of lines * Fixed parameters list to be each parameter on its line * Deleted lines after endmodule and consecutive empty lines * Fixed indentation Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-04-08 10:21:52 +00:00
.status_synth_params2());
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
always @(posedge clk) begin
if (reset == 1'b1) begin
data_mismatch <= 1'b0;
end else if (rx_valid == 1'b1) begin
if ((rx_data & rx_mask) !== ({NUM_LANES{rx_ref_data}} & rx_mask)) begin
data_mismatch <= 1'b1;
end
end
end
reg [NUM_LANES-1:0] lane_latency_match;
generate for (i = 0; i < NUM_LANES; i = i + 1) begin
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
wire [31:0] LANE_OFFSET = BASE_LATENCY + LANE_DELAY + BEATS_PER_MULTIFRAME + i;
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
always @(posedge clk) begin
if (rx_status_lane_ifs_ready[i] == 1'b1 &&
jesd204: Add support for 8-byte JESD204B, frame alignment character insertion/replacement Add support to JESD204 RX and TX core for 8-byte 8b/10b link mode, and frame alignment character replace/insert with or without scrambling. Add support for xcelium simulator to jesd204/tb Increased cores minor version.
2020-01-30 22:05:13 +00:00
rx_status_lane_latency[i*14+13:i*14+DPW_LOG2] == LANE_OFFSET) begin
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
lane_latency_match[i] <= 1'b1;
end else begin
lane_latency_match[i] <= 1'b0;
end
end
end endgenerate
always @(*) begin
if (rx_valid !== 1'b1 || tx_ready !== 1'b1 || data_mismatch == 1'b1 ||
&lane_latency_match != 1'b1) begin
failed <= 1'b1;
end else begin
failed <= 1'b0;
end
end
endmodule