pluto_hdl_adi/library/jesd204/jesd204_common/jesd204_lmfc.v

240 lines
7.2 KiB
Coq
Raw Normal View History

//
// The ADI JESD204 Core is released under the following license, which is
// different than all other HDL cores in this repository.
//
// Please read this, and understand the freedoms and responsibilities you have
// by using this source code/core.
//
// The JESD204 HDL, is copyright © 2016-2017 Analog Devices Inc.
//
// This core is free software, you can use run, copy, study, change, ask
// questions about and improve this core. Distribution of source, or resulting
// binaries (including those inside an FPGA or ASIC) require you to release the
// source of the entire project (excluding the system libraries provide by the
// tools/compiler/FPGA vendor). These are the terms of the GNU General Public
// License version 2 as published by the Free Software Foundation.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE. See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License version 2
// along with this source code, and binary. If not, see
// <http://www.gnu.org/licenses/>.
//
// Commercial licenses (with commercial support) of this JESD204 core are also
// available under terms different than the General Public License. (e.g. they
// do not require you to accompany any image (FPGA or ASIC) using the JESD204
// core with any corresponding source code.) For these alternate terms you must
// purchase a license from Analog Devices Technology Licensing Office. Users
// interested in such a license should contact jesd204-licensing@analog.com for
// more information. This commercial license is sub-licensable (if you purchase
// chips from Analog Devices, incorporate them into your PCB level product, and
// purchase a JESD204 license, end users of your product will also have a
// license to use this core in a commercial setting without releasing their
// source code).
//
// In addition, we kindly ask you to acknowledge ADI in any program, application
// or publication in which you use this JESD204 HDL core. (You are not required
// to do so; it is up to your common sense to decide whether you want to comply
// with this request or not.) For general publications, we suggest referencing :
// The design and implementation of the JESD204 HDL Core used in this project
// is copyright © 2016-2017, Analog Devices, Inc.
//
`timescale 1ns/100ps
module jesd204_lmfc #(
parameter LINK_MODE = 1, // 2 - 64B/66B; 1 - 8B/10B
parameter DATA_PATH_WIDTH = 4
) (
input clk,
input reset,
input sysref,
input [9:0] cfg_octets_per_multiframe,
input [7:0] cfg_beats_per_multiframe,
input [7:0] cfg_lmfc_offset,
input cfg_sysref_oneshot,
input cfg_sysref_disable,
output reg lmfc_edge,
output reg lmfc_clk,
output reg [7:0] lmfc_counter,
// Local MultiBlock clock edge
output reg lmc_edge,
output reg lmc_quarter_edge,
// End of Extended MultiBlock
output reg eoemb,
output reg sysref_edge,
output reg sysref_alignment_error
);
localparam DPW_LOG2 = DATA_PATH_WIDTH == 8 ? 3 : DATA_PATH_WIDTH == 4 ? 2 : 1;
localparam BEATS_PER_MF_WIDTH = 10-DPW_LOG2;
//wire [BEATS_PER_MF_WIDTH-1:0] cfg_beats_per_multiframe = cfg_octets_per_multiframe[9:DPW_LOG2];
reg [BEATS_PER_MF_WIDTH:0] cfg_whole_beats_per_multiframe;
reg sysref_r = 1'b0;
reg sysref_d1 = 1'b0;
reg sysref_d2 = 1'b0;
reg sysref_d3 = 1'b0;
reg sysref_captured;
/* lmfc_octet_counter = lmfc_counter * (char_clock_rate / device_clock_rate) */
reg [7:0] lmfc_counter_next = 'h00;
reg lmfc_clk_p1 = 1'b1;
reg lmfc_active = 1'b0;
always @(posedge clk) begin
sysref_r <= sysref;
end
/*
* Unfortunately setup and hold are often ignored on the sysref signal relative
* to the device clock. The device will often still work fine, just not
* deterministic. Reduce the probability that the meta-stability creeps into the
* reset of the system and causes non-reproducible issues.
*/
always @(posedge clk) begin
sysref_d1 <= sysref_r;
sysref_d2 <= sysref_d1;
sysref_d3 <= sysref_d2;
end
always @(posedge clk) begin
if (sysref_d3 == 1'b0 && sysref_d2 == 1'b1 && cfg_sysref_disable == 1'b0) begin
sysref_edge <= 1'b1;
end else begin
sysref_edge <= 1'b0;
end
end
always @(posedge clk) begin
if (reset == 1'b1) begin
sysref_captured <= 1'b0;
end else if (sysref_edge == 1'b1) begin
sysref_captured <= 1'b1;
end
end
/*
* The configuration must be static when the core is out of reset. Otherwise
* undefined behaviour might occur.
* E.g. lmfc_counter > beats_per_multiframe
*
* To change the configuration first assert reset, then update the configuration
* setting, finally deassert reset.
*/
/*
* For DATA_PATH_WIDTH == 8, F*K%8=4, set
* cfg_beats_per_multiframe = cfg_beats_per_multiframe*2
* LMFC will be twice the actual length
*/
always @(*) begin
if((LINK_MODE == 1) && (DATA_PATH_WIDTH == 8) && ~cfg_octets_per_multiframe[2]) begin
cfg_whole_beats_per_multiframe = cfg_beats_per_multiframe*2;
end else begin
cfg_whole_beats_per_multiframe = cfg_beats_per_multiframe;
end
end
always @(*) begin
if (lmfc_counter == cfg_whole_beats_per_multiframe) begin
lmfc_counter_next = 'h00;
end else begin
lmfc_counter_next = lmfc_counter + 1'b1;
end
end
always @(posedge clk) begin
if (reset == 1'b1) begin
lmfc_counter <= 'h01;
lmfc_active <= cfg_sysref_disable;
end else begin
/*
* In oneshot mode only the first occurence of the
* SYSREF signal is used for alignment.
*/
if (sysref_edge == 1'b1 &&
(cfg_sysref_oneshot == 1'b0 || sysref_captured == 1'b0)) begin
lmfc_counter <= cfg_lmfc_offset;
lmfc_active <= 1'b1;
end else begin
lmfc_counter <= lmfc_counter_next;
end
end
end
always @(posedge clk) begin
if (reset == 1'b1) begin
sysref_alignment_error <= 1'b0;
end else begin
/*
* Alignement error is reported regardless of oneshot mode
* setting.
*/
sysref_alignment_error <= 1'b0;
if (sysref_edge == 1'b1 && lmfc_active == 1'b1 &&
lmfc_counter_next != cfg_lmfc_offset) begin
sysref_alignment_error <= 1'b1;
end
end
end
always @(posedge clk) begin
if (lmfc_counter == 'h00 && lmfc_active == 1'b1) begin
lmfc_edge <= 1'b1;
end else begin
lmfc_edge <= 1'b0;
end
end
// 1 MultiBlock = 32 blocks
always @(posedge clk) begin
if (lmfc_counter[4:0] == 'h00 && lmfc_active == 1'b1) begin
lmc_edge <= 1'b1;
end else begin
lmc_edge <= 1'b0;
end
end
always @(posedge clk) begin
if (lmfc_counter[2:0] == 'h00 && lmfc_active == 1'b1) begin
lmc_quarter_edge <= 1'b1;
end else begin
lmc_quarter_edge <= 1'b0;
end
end
// End of Extended MultiBlock
always @(posedge clk) begin
if (lmfc_active == 1'b1) begin
eoemb <= lmfc_counter[7:5] == cfg_whole_beats_per_multiframe[7:5];
end else begin
eoemb <= 1'b0;
end
end
always @(posedge clk) begin
if (reset == 1'b1) begin
lmfc_clk_p1 <= 1'b0;
end else if (lmfc_active == 1'b1) begin
if (lmfc_counter == cfg_whole_beats_per_multiframe) begin
lmfc_clk_p1 <= 1'b1;
end else if (lmfc_counter == cfg_whole_beats_per_multiframe[7:1]) begin
lmfc_clk_p1 <= 1'b0;
end
end
lmfc_clk <= lmfc_clk_p1;
end
endmodule