pluto_hdl_adi/library/axi_adcfifo/axi_adcfifo_rd.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
// 
// All rights reserved.
// 
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//    
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module axi_adcfifo_rd (

  // request and synchronization

  dma_xfer_req,

  // read interface

  axi_rd_req,
  axi_rd_addr,

  // axi interface

  axi_clk,
  axi_resetn,
  axi_arvalid,
  axi_arid,
  axi_arburst,
  axi_arlock,
  axi_arcache,
  axi_arprot,
  axi_arqos,
  axi_aruser,
  axi_arlen,
  axi_arsize,
  axi_araddr,
  axi_arready,
  axi_rvalid,
  axi_rid,
  axi_ruser,
  axi_rresp,
  axi_rlast,
  axi_rdata,
  axi_rready,

  // axi status

  axi_rerror,

  // fifo interface

  axi_drst,
  axi_dvalid,
  axi_ddata,
  axi_dready);

  // parameters

  parameter   AXI_DATA_WIDTH = 512;
  parameter   AXI_SIZE = 2;
  parameter   AXI_LENGTH = 16;
  parameter   AXI_ADDRESS = 32'h00000000;
  parameter   AXI_ADDRLIMIT = 32'h00000000;
  localparam  AXI_BYTE_WIDTH = AXI_DATA_WIDTH/8;
  localparam  AXI_AWINCR = AXI_LENGTH * AXI_BYTE_WIDTH;
  localparam  BUF_THRESHOLD_LO = 6'd3;
  localparam  BUF_THRESHOLD_HI = 6'd60;

  // request and synchronization

  input                           dma_xfer_req;

  // read interface

  input                           axi_rd_req;
  input   [ 31:0]                 axi_rd_addr;

  // axi interface

  input                           axi_clk;
  input                           axi_resetn;
  output                          axi_arvalid;
  output  [  3:0]                 axi_arid;
  output  [  1:0]                 axi_arburst;
  output                          axi_arlock;
  output  [  3:0]                 axi_arcache;
  output  [  2:0]                 axi_arprot;
  output  [  3:0]                 axi_arqos;
  output  [  3:0]                 axi_aruser;
  output  [  7:0]                 axi_arlen;
  output  [  2:0]                 axi_arsize;
  output  [ 31:0]                 axi_araddr;
  input                           axi_arready;
  input                           axi_rvalid;
  input   [  3:0]                 axi_rid;
  input   [  3:0]                 axi_ruser;
  input   [  1:0]                 axi_rresp;
  input                           axi_rlast;
  input   [AXI_DATA_WIDTH-1:0]    axi_rdata;
  output                          axi_rready;

  // axi status

  output                          axi_rerror;

  // fifo interface

  output                          axi_drst;
  output                          axi_dvalid;
  output  [AXI_DATA_WIDTH-1:0]    axi_ddata;
  input                           axi_dready;

  // internal registers

  reg     [ 31:0]                 axi_rd_addr_h = 'd0;
  reg                             axi_rd = 'd0;
  reg                             axi_rd_active = 'd0;
  reg     [  2:0]                 axi_xfer_req_m = 'd0;
  reg                             axi_xfer_init = 'd0;
  reg                             axi_xfer_enable = 'd0;
  reg                             axi_arvalid = 'd0;
  reg     [ 31:0]                 axi_araddr = 'd0;
  reg                             axi_drst = 'd0;
  reg                             axi_dvalid = 'd0;
  reg     [AXI_DATA_WIDTH-1:0]    axi_ddata = 'd0;
  reg                             axi_rready = 'd0;
  reg                             axi_rerror = 'd0;

  // internal signals

  wire                            axi_ready_s;

  // read is way too slow- buffer mode 

  assign axi_ready_s = (~axi_arvalid | axi_arready) & axi_dready;

  always @(posedge axi_clk or negedge axi_resetn) begin
    if (axi_resetn == 1'b0) begin
      axi_rd_addr_h <= 'd0;
      axi_rd <= 'd0;
      axi_rd_active <= 'd0;
      axi_xfer_req_m <= 'd0;
      axi_xfer_init <= 'd0;
      axi_xfer_enable <= 'd0;
    end else begin
      if (axi_xfer_init == 1'b1) begin
        axi_rd_addr_h <= AXI_ADDRESS;
      end else if (axi_rd_req == 1'b1) begin
        axi_rd_addr_h <= axi_rd_addr;
      end
      if (axi_rd_active == 1'b1) begin
        axi_rd <= 1'b0;
        if ((axi_rvalid == 1'b1) && (axi_rlast == 1'b1)) begin
          axi_rd_active <= 1'b0;
        end
      end else if ((axi_ready_s == 1'b1) && (axi_araddr < axi_rd_addr_h)) begin
        axi_rd <= axi_xfer_enable;
        axi_rd_active <= axi_xfer_enable;
      end
      axi_xfer_req_m <= {axi_xfer_req_m[1:0], dma_xfer_req};
      axi_xfer_init <= axi_xfer_req_m[1] & ~axi_xfer_req_m[2];
      axi_xfer_enable <= axi_xfer_req_m[2];
    end
  end

  // address channel

  assign axi_arid  = 4'b0000;
  assign axi_arburst  = 2'b01;
  assign axi_arlock  = 1'b0;
  assign axi_arcache  = 4'b0010;
  assign axi_arprot  = 3'b000;
  assign axi_arqos  = 4'b0000;
  assign axi_aruser  = 4'b0001;
  assign axi_arlen  = AXI_LENGTH - 1;
  assign axi_arsize  = AXI_SIZE;

  always @(posedge axi_clk or negedge axi_resetn) begin
    if (axi_resetn == 1'b0) begin
      axi_arvalid <= 'd0;
      axi_araddr <= 'd0;
    end else begin
      if (axi_arvalid == 1'b1) begin
        if (axi_arready == 1'b1) begin
          axi_arvalid <= 1'b0;
        end
      end else begin
        if (axi_rd == 1'b1) begin
          axi_arvalid <= 1'b1;
        end
      end
      if (axi_xfer_init == 1'b1) begin
        axi_araddr <= AXI_ADDRESS;
      end else if ((axi_arvalid == 1'b1) && (axi_arready == 1'b1)) begin
        axi_araddr <= axi_araddr + AXI_AWINCR;
      end
    end
  end

  // read data channel

  always @(posedge axi_clk or negedge axi_resetn) begin
    if (axi_resetn == 1'b0) begin
      axi_drst <= 'd1;
      axi_dvalid <= 'd0;
      axi_ddata <= 'd0;
      axi_rready <= 'd0;
    end else begin
      axi_drst <= ~axi_xfer_req_m[1];
      axi_dvalid <= axi_rvalid;
      axi_ddata <= axi_rdata;
      axi_rready <= 1'b1;
    end
  end

  always @(posedge axi_clk or negedge axi_resetn) begin
    if (axi_resetn == 1'b0) begin
      axi_rerror <= 'd0;
    end else begin
      axi_rerror <= axi_rvalid & axi_rresp[1];
    end
  end

endmodule

// ***************************************************************************
// ***************************************************************************