zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/axi_spdif_tx/tx_encoder.vhd

496 lines
20 KiB
VHDL
Raw Normal View History

initial checkin
2014-02-28 19:26:22 +00:00
----------------------------------------------------------------------
---- ----
---- WISHBONE SPDIF IP Core ----
---- ----
---- This file is part of the SPDIF project ----
---- http://www.opencores.org/cores/spdif_interface/ ----
---- ----
---- Description ----
---- SPDIF transmitter signal encoder. Reads out samples from the ----
---- sample buffer, assembles frames and subframes and encodes ----
---- serial data as bi-phase mark code. ----
---- ----
---- To Do: ----
---- - ----
---- ----
---- Author(s): ----
---- - Geir Drange, gedra@opencores.org ----
---- ----
----------------------------------------------------------------------
---- ----
---- Copyright (C) 2004 Authors and OPENCORES.ORG ----
---- ----
---- This source file may be used and distributed without ----
---- restriction provided that this copyright statement is not ----
---- removed from the file and that any derivative work contains ----
---- the original copyright notice and the associated disclaimer. ----
---- ----
---- This source file is free software; you can redistribute it ----
---- and/or modify it under the terms of the GNU Lesser General ----
---- Public License as published by the Free Software Foundation; ----
---- either version 2.1 of the License, or (at your option) any ----
---- later version. ----
---- ----
---- This source is distributed in the hope that it will be ----
---- useful, but WITHOUT ANY WARRANTY; without even the implied ----
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ----
---- PURPOSE. See the GNU Lesser General Public License for more ----
---- details. ----
---- ----
---- You should have received a copy of the GNU Lesser General ----
---- Public License along with this source; if not, download it ----
---- from http://www.opencores.org/lgpl.shtml ----
---- ----
----------------------------------------------------------------------
--
-- CVS Revision History
--
-- $Log: not supported by cvs2svn $
--
--
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity tx_encoder is
generic (DATA_WIDTH: integer range 16 to 32 := 32);
port (
up_clk: in std_logic; -- clock
data_clk : in std_logic; -- data clock
resetn : in std_logic; -- resetn
conf_mode: in std_logic_vector(3 downto 0); -- sample format
conf_ratio: in std_logic_vector(7 downto 0); -- clock divider
conf_txdata: in std_logic; -- sample data enable
conf_txen: in std_logic; -- spdif signal enable
chstat_freq: in std_logic_vector(1 downto 0); -- sample freq.
chstat_gstat: in std_logic; -- generation status
chstat_preem: in std_logic; -- preemphasis status
chstat_copy: in std_logic; -- copyright bit
chstat_audio: in std_logic; -- data format
sample_data: in std_logic_vector(DATA_WIDTH - 1 downto 0); -- audio data
sample_data_ack: out std_logic; -- sample buffer read
channel: out std_logic;
spdif_tx_o: out std_logic);
end tx_encoder;
architecture rtl of tx_encoder is
signal spdif_clk_en, spdif_out : std_logic;
signal clk_cnt : integer range 0 to 511;
type buf_states is (IDLE, READ_CHA, READ_CHB, CHA_RDY, CHB_RDY);
signal bufctrl : buf_states;
signal cha_samp_ack, chb_samp_ack : std_logic;
type frame_states is (IDLE, BLOCK_START, CHANNEL_A, CHANNEL_B);
signal framest : frame_states;
signal frame_cnt : integer range 0 to 191;
signal bit_cnt, par_cnt : integer range 0 to 31;
signal inv_preamble, toggle, valid : std_logic;
signal def_user_data, def_ch_status : std_logic_vector(191 downto 0);
signal active_user_data, active_ch_status : std_logic_vector(191 downto 0);
signal audio : std_logic_vector(23 downto 0);
signal par_vector : std_logic_vector(26 downto 0);
signal send_audio : std_logic;
axi_spdif_tx: CDC overhaul Use common prefix for CDC elements and add the proper constraints to the XDC file. And add a missing stage to the toggle synchronizers. Also drop a some unnecessary resets. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-16 08:50:10 +00:00
signal cdc_sync_stage0_tick_counter : std_logic := '0';
signal cdc_sync_stage1_tick_counter : std_logic := '0';
signal cdc_sync_stage2_tick_counter : std_logic := '0';
signal cdc_sync_stage3_tick_counter : std_logic := '0';
initial checkin
2014-02-28 19:26:22 +00:00
signal tick_counter : std_logic;
constant X_PREAMBLE : std_logic_vector(0 to 7) := "11100010";
constant Y_PREAMBLE : std_logic_vector(0 to 7) := "11100100";
constant Z_PREAMBLE : std_logic_vector(0 to 7) := "11101000";
function encode_bit (
signal bit_cnt : integer; -- sub-frame bit position
signal valid : std_logic; -- validity bit
signal frame_cnt : integer; -- frame counter
signal par_cnt : integer; -- parity counter
signal user_data : std_logic_vector(191 downto 0);
signal ch_status : std_logic_vector(191 downto 0);
signal audio : std_logic_vector(23 downto 0);
signal toggle : std_logic;
signal prev_spdif : std_logic) -- prev. value of spdif signal
return std_logic is
variable spdif, next_bit : std_logic;
begin
if bit_cnt > 3 and bit_cnt < 28 then -- audio part
next_bit := audio(bit_cnt - 4);
elsif bit_cnt = 28 then -- validity bit
next_bit := valid;
elsif bit_cnt = 29 then -- user data
next_bit := user_data(frame_cnt);
elsif bit_cnt = 30 then
next_bit := ch_status(frame_cnt); -- channel status
elsif bit_cnt = 31 then
if par_cnt mod 2 = 1 then
next_bit := '1';
else
next_bit := '0';
end if;
end if;
-- bi-phase mark encoding:
if next_bit = '0' then
if toggle = '0' then
spdif := not prev_spdif;
else
spdif := prev_spdif;
end if;
else
spdif := not prev_spdif;
end if;
return(spdif);
end encode_bit;
begin
-- SPDIF clock enable generation. The clock is a fraction of the data clock,
-- determined by the conf_ratio value.
DCLK : process (data_clk)
begin
if rising_edge(data_clk) then
axi_spdif_tx: CDC overhaul Use common prefix for CDC elements and add the proper constraints to the XDC file. And add a missing stage to the toggle synchronizers. Also drop a some unnecessary resets. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-16 08:50:10 +00:00
cdc_sync_stage0_tick_counter <= not cdc_sync_stage0_tick_counter;
initial checkin
2014-02-28 19:26:22 +00:00
end if;
end process DCLK;
axi_spdif_tx: CDC overhaul Use common prefix for CDC elements and add the proper constraints to the XDC file. And add a missing stage to the toggle synchronizers. Also drop a some unnecessary resets. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-16 08:50:10 +00:00
process (up_clk) begin
if rising_edge(up_clk) then
cdc_sync_stage1_tick_counter <= cdc_sync_stage0_tick_counter;
cdc_sync_stage2_tick_counter <= cdc_sync_stage1_tick_counter;
cdc_sync_stage3_tick_counter <= cdc_sync_stage2_tick_counter;
end if;
end process;
tick_counter <= cdc_sync_stage3_tick_counter xor cdc_sync_stage2_tick_counter;
initial checkin
2014-02-28 19:26:22 +00:00
CGEN: process (up_clk)
begin
if rising_edge(up_clk) then
if resetn = '0' or conf_txen = '0' then
clk_cnt <= 0;
spdif_clk_en <= '0';
else
spdif_clk_en <= '0';
axi_spdif_tx: CDC overhaul Use common prefix for CDC elements and add the proper constraints to the XDC file. And add a missing stage to the toggle synchronizers. Also drop a some unnecessary resets. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-16 08:50:10 +00:00
if tick_counter = '1' then
initial checkin
2014-02-28 19:26:22 +00:00
if clk_cnt < to_integer(unsigned(conf_ratio)) then
clk_cnt <= clk_cnt + 1;
else
clk_cnt <= 0;
spdif_clk_en <= '1';
end if;
end if;
end if;
end if;
end process CGEN;
SRD: process (up_clk)
begin
if rising_edge(up_clk) then
if resetn = '0' or conf_txdata = '0' then
bufctrl <= IDLE;
sample_data_ack <= '0';
channel <= '0';
else
case bufctrl is
when IDLE =>
sample_data_ack <= '0';
if conf_txdata = '1' then
bufctrl <= READ_CHA;
sample_data_ack <='1';
end if;
when READ_CHA =>
channel <= '0';
sample_data_ack <= '0';
bufctrl <= CHA_RDY;
when CHA_RDY =>
if cha_samp_ack = '1' then
sample_data_ack <= '1';
bufctrl <= READ_CHB;
end if;
when READ_CHB =>
channel <= '1';
sample_data_ack <= '0';
bufctrl <= CHB_RDY;
when CHB_RDY =>
if chb_samp_ack = '1' then
sample_data_ack <= '1';
bufctrl <= READ_CHA;
end if;
when others =>
bufctrl <= IDLE;
end case;
end if;
end if;
end process SRD;
TXSYNC: process (data_clk)
begin
if (rising_edge(data_clk)) then
spdif_tx_o <= spdif_out;
end if;
end process TXSYNC;
-- State machine that generates sub-frames and blocks
FRST: process (up_clk)
begin
if rising_edge(up_clk) then
if resetn = '0' or conf_txen = '0' then
framest <= IDLE;
frame_cnt <= 0;
bit_cnt <= 0;
spdif_out <= '0';
inv_preamble <= '0';
toggle <= '0';
valid <= '1';
send_audio <= '0';
cha_samp_ack <= '0';
chb_samp_ack <= '0';
else
if spdif_clk_en = '1' then -- SPDIF clock is twice the bit rate
case framest is
when IDLE =>
bit_cnt <= 0;
frame_cnt <= 0;
inv_preamble <= '0';
toggle <= '0';
framest <= BLOCK_START;
when BLOCK_START => -- Start of channels status block/Ch. A
chb_samp_ack <= '0';
toggle <= not toggle; -- Each bit uses two clock enables,
if toggle = '1' then -- counted by the toggle bit.
if bit_cnt < 31 then
bit_cnt <= bit_cnt + 1;
else
bit_cnt <= 0;
if send_audio = '1' then
cha_samp_ack <= '1';
end if;
framest <= CHANNEL_B;
end if;
end if;
-- Block start uses preamble Z.
if bit_cnt < 4 then
if toggle = '0' then
spdif_out <= Z_PREAMBLE(2 * bit_cnt) xor inv_preamble;
else
spdif_out <= Z_PREAMBLE(2 * bit_cnt + 1) xor inv_preamble;
end if;
par_cnt <= 0;
elsif bit_cnt > 3 and bit_cnt <= 31 then
spdif_out <= encode_bit(bit_cnt, valid, frame_cnt,
par_cnt, active_user_data,
active_ch_status,
audio, toggle, spdif_out);
if bit_cnt = 31 then
inv_preamble <= encode_bit(bit_cnt, valid, frame_cnt,
par_cnt, active_user_data,
active_ch_status,
audio, toggle, spdif_out);
end if;
if toggle = '0' then
if bit_cnt > 3 and bit_cnt < 31 and
par_vector(bit_cnt - 4) = '1' then
par_cnt <= par_cnt + 1;
end if;
end if;
end if;
when CHANNEL_A => -- Sub-frame: channel A.
chb_samp_ack <= '0';
toggle <= not toggle;
if toggle = '1' then
if bit_cnt < 31 then
bit_cnt <= bit_cnt + 1;
else
bit_cnt <= 0;
if spdif_out = '1' then
inv_preamble <= '1';
else
inv_preamble <= '0';
end if;
if send_audio = '1' then
cha_samp_ack <= '1';
end if;
framest <= CHANNEL_B;
end if;
end if;
-- Channel A uses preable X.
if bit_cnt < 4 then
if toggle = '0' then
spdif_out <= X_PREAMBLE(2 * bit_cnt) xor inv_preamble;
else
spdif_out <= X_PREAMBLE(2 * bit_cnt + 1) xor inv_preamble;
end if;
par_cnt <= 0;
elsif bit_cnt > 3 and bit_cnt <= 31 then
spdif_out <= encode_bit(bit_cnt, valid, frame_cnt,
par_cnt, active_user_data,
active_ch_status,
audio, toggle, spdif_out);
if bit_cnt = 31 then
inv_preamble <= encode_bit(bit_cnt, valid, frame_cnt,
par_cnt, active_user_data,
active_ch_status,
audio, toggle, spdif_out);
end if;
if toggle = '0' then
if bit_cnt > 3 and bit_cnt < 31 and
par_vector(bit_cnt - 4) = '1' then
par_cnt <= par_cnt + 1;
end if;
end if;
end if;
when CHANNEL_B => -- Sub-frame: channel B.
cha_samp_ack <= '0';
toggle <= not toggle;
if toggle = '1' then
if bit_cnt < 31 then
bit_cnt <= bit_cnt + 1;
else
bit_cnt <= 0;
valid <= not conf_txdata;
if spdif_out = '1' then
inv_preamble <= '1';
else
inv_preamble <= '0';
end if;
send_audio <= conf_txdata; -- 1 if audio samples sohuld be sent
if send_audio = '1' then
chb_samp_ack <= '1';
end if;
if frame_cnt < 191 then -- One block is 192 frames
frame_cnt <= frame_cnt + 1;
framest <= CHANNEL_A;
else
frame_cnt <= 0;
framest <= BLOCK_START;
end if;
end if;
end if;
-- Channel B uses preable Y.
if bit_cnt < 4 then
if toggle = '0' then
spdif_out <= Y_PREAMBLE(2 * bit_cnt) xor inv_preamble;
else
spdif_out <= Y_PREAMBLE(2 * bit_cnt + 1) xor inv_preamble;
end if;
par_cnt <= 0;
elsif bit_cnt > 3 and bit_cnt <= 31 then
spdif_out <= encode_bit(bit_cnt, valid, frame_cnt,
par_cnt, active_user_data,
active_ch_status,
audio, toggle, spdif_out);
if bit_cnt = 31 then
inv_preamble <= encode_bit(bit_cnt, valid, frame_cnt,
par_cnt, active_user_data,
active_ch_status,
audio, toggle, spdif_out);
end if;
if toggle = '0' then
if bit_cnt > 3 and bit_cnt < 31 and
par_vector(bit_cnt - 4) = '1' then
par_cnt <= par_cnt + 1;
end if;
end if;
end if;
when others =>
framest <= IDLE;
end case;
end if;
end if;
end if;
end process FRST;
-- Audio data latching
DA32: if DATA_WIDTH = 32 generate
ALAT: process (up_clk)
begin
if rising_edge(up_clk) then
if send_audio = '0' then
audio(23 downto 0) <= (others => '0');
else
case to_integer(unsigned(conf_mode)) is
when 0 => -- 16 bit audio
audio(23 downto 8) <= sample_data(15 downto 0);
audio(7 downto 0) <= (others => '0');
when 1 => -- 17 bit audio
audio(23 downto 7) <= sample_data(16 downto 0);
audio(6 downto 0) <= (others => '0');
when 2 => -- 18 bit audio
audio(23 downto 6) <= sample_data(17 downto 0);
audio(5 downto 0) <= (others => '0');
when 3 => -- 19 bit audio
audio(23 downto 5) <= sample_data(18 downto 0);
audio(4 downto 0) <= (others => '0');
when 4 => -- 20 bit audio
audio(23 downto 4) <= sample_data(19 downto 0);
audio(3 downto 0) <= (others => '0');
when 5 => -- 21 bit audio
audio(23 downto 3) <= sample_data(20 downto 0);
audio(2 downto 0) <= (others => '0');
when 6 => -- 22 bit audio
audio(23 downto 2) <= sample_data(21 downto 0);
audio(1 downto 0) <= (others => '0');
when 7 => -- 23 bit audio
audio(23 downto 1) <= sample_data(22 downto 0);
audio(0) <= '0';
when 8 => -- 24 bit audio
audio(23 downto 0) <= sample_data(23 downto 0);
when others => -- unsupported modes
audio(23 downto 0) <= (others => '0');
end case;
end if;
end if;
end process ALAT;
end generate DA32;
DA16: if DATA_WIDTH = 16 generate
ALAT: process (up_clk)
begin
if rising_edge(up_clk) then
if send_audio = '0' then
audio(23 downto 0) <= (others => '0');
else
audio(23 downto 8) <= sample_data(15 downto 0);
audio(7 downto 0) <= (others => '0');
end if;
end if;
end process ALAT;
end generate DA16;
-- Parity vector. These bits are counted to generate even parity
par_vector(23 downto 0) <= audio(23 downto 0);
par_vector(24) <= valid;
par_vector(25) <= active_user_data(frame_cnt);
par_vector(26) <= active_ch_status(frame_cnt);
-- Channel status and user datat to be used if buffers are disabled.
-- User data is then all zero, while channel status bits are taken from
-- register TxChStat.
def_user_data(191 downto 0) <= (others => '0');
def_ch_status(0) <= '0'; -- consumer mode
def_ch_status(1) <= chstat_audio; -- audio bit
def_ch_status(2) <= chstat_copy; -- copy right
def_ch_status(5 downto 3) <= "000" when chstat_preem = '0'
else "001"; -- pre-emphasis
def_ch_status(7 downto 6) <= "00";
def_ch_status(14 downto 8) <= (others => '0');
def_ch_status(15) <= chstat_gstat; -- generation status
def_ch_status(23 downto 16) <= (others => '0');
def_ch_status(27 downto 24) <= "0000" when chstat_freq = "00" else
"0010" when chstat_freq = "01" else
"0011" when chstat_freq = "10" else
"0001";
def_ch_status(191 downto 28) <= (others => '0'); --191 28
-- Generate channel status vector based on configuration register setting.
active_ch_status <= def_ch_status;
-- Generate user data vector based on configuration register setting.
active_user_data <= def_user_data;
end rtl;