zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/fmcomms2/common/fmcomms2_bd.tcl

201 lines
10 KiB
Tcl
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# fmcomms2
create_bd_port -dir I rx_clk_in_p
create_bd_port -dir I rx_clk_in_n
create_bd_port -dir I rx_frame_in_p
create_bd_port -dir I rx_frame_in_n
create_bd_port -dir I -from 5 -to 0 rx_data_in_p
create_bd_port -dir I -from 5 -to 0 rx_data_in_n
create_bd_port -dir O tx_clk_out_p
create_bd_port -dir O tx_clk_out_n
create_bd_port -dir O tx_frame_out_p
create_bd_port -dir O tx_frame_out_n
create_bd_port -dir O -from 5 -to 0 tx_data_out_p
create_bd_port -dir O -from 5 -to 0 tx_data_out_n
create_bd_port -dir O enable
create_bd_port -dir O txnrx
fmcomms2_tdd: Update tdd_enabaled path This line controls the mux, which switch between hdl and software (GPIO) control of the ENABLE/TXNRX pins. Fix the broken path and change the name from "tdd_enable" to "tdd_enabled".
2015-08-11 09:24:26 +00:00
create_bd_port -dir O tdd_enabled
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
axi_ad9361/tdd: Update the synchronization logic The master will regenerate a sync pulse periodically. The period can be defined by software.
2015-08-19 09:21:23 +00:00
create_bd_port -dir O tdd_sync_out
create_bd_port -dir I tdd_sync_in
fmcomms2: Add a synchronization interface for TDD mode. Supported carrier are ZC706 and RFSOM. The synchronization pulse is automatically generated by the master terminal, when TDD mode is enabled. By default a terminal is slave, software must write 0x01 into TDD register 0x50.
2015-07-28 11:41:32 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# ad9361 core
set axi_ad9361 [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9361:1.0 axi_ad9361]
set_property -dict [list CONFIG.PCORE_ID {0}] $axi_ad9361
set axi_ad9361_dac_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9361_dac_dma]
set_property -dict [list CONFIG.C_DMA_TYPE_SRC {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_DMA_TYPE_DEST {2}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_CYCLIC {1}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_SYNC_TRANSFER_START {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_AXI_SLICE_SRC {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_AXI_SLICE_DEST {1}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_DEST_REQ {1}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_SRC_DEST {1}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_REQ_SRC {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_2D_TRANSFER {0}] $axi_ad9361_dac_dma
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_DEST {64}] $axi_ad9361_dac_dma
set util_ad9361_dac_upack [create_bd_cell -type ip -vlnv analog.com:user:util_upack:1.0 util_ad9361_dac_upack]
set_property -dict [list CONFIG.CH_CNT {4}] $util_ad9361_dac_upack
set_property -dict [list CONFIG.CH_DW {16}] $util_ad9361_dac_upack
set axi_ad9361_adc_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9361_adc_dma]
set_property -dict [list CONFIG.C_DMA_TYPE_SRC {2}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_DMA_TYPE_DEST {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_CYCLIC {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_SYNC_TRANSFER_START {1}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_AXI_SLICE_SRC {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_AXI_SLICE_DEST {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_DEST_REQ {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_SRC_DEST {1}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_CLKS_ASYNC_REQ_SRC {1}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_2D_TRANSFER {0}] $axi_ad9361_adc_dma
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_SRC {64}] $axi_ad9361_adc_dma
set util_ad9361_adc_pack [create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 util_ad9361_adc_pack]
set_property -dict [list CONFIG.CH_CNT {4}] $util_ad9361_adc_pack
set_property -dict [list CONFIG.CH_DW {16}] $util_ad9361_adc_pack
set util_ad9361_adc_fifo [create_bd_cell -type ip -vlnv analog.com:user:util_wfifo:1.0 util_ad9361_adc_fifo]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] $util_ad9361_adc_fifo
set_property -dict [list CONFIG.DIN_ADDR_WIDTH {4}] $util_ad9361_adc_fifo
set_property -dict [list CONFIG.DIN_DATA_WIDTH {16}] $util_ad9361_adc_fifo
set_property -dict [list CONFIG.DOUT_DATA_WIDTH {16}] $util_ad9361_adc_fifo
# connections
ad_connect sys_200m_clk axi_ad9361/delay_clk
ad_connect axi_ad9361_clk axi_ad9361/l_clk
ad_connect axi_ad9361_clk axi_ad9361/clk
ad_connect rx_clk_in_p axi_ad9361/rx_clk_in_p
ad_connect rx_clk_in_n axi_ad9361/rx_clk_in_n
ad_connect rx_frame_in_p axi_ad9361/rx_frame_in_p
ad_connect rx_frame_in_n axi_ad9361/rx_frame_in_n
ad_connect rx_data_in_p axi_ad9361/rx_data_in_p
ad_connect rx_data_in_n axi_ad9361/rx_data_in_n
ad_connect tx_clk_out_p axi_ad9361/tx_clk_out_p
ad_connect tx_clk_out_n axi_ad9361/tx_clk_out_n
ad_connect tx_frame_out_p axi_ad9361/tx_frame_out_p
ad_connect tx_frame_out_n axi_ad9361/tx_frame_out_n
ad_connect tx_data_out_p axi_ad9361/tx_data_out_p
ad_connect tx_data_out_n axi_ad9361/tx_data_out_n
ad_connect enable axi_ad9361/enable
ad_connect txnrx axi_ad9361/txnrx
ad_connect axi_ad9361_clk util_ad9361_adc_fifo/din_clk
ad_connect axi_ad9361/rst util_ad9361_adc_fifo/din_rst
ad_connect sys_cpu_clk util_ad9361_adc_fifo/dout_clk
ad_connect sys_cpu_resetn util_ad9361_adc_fifo/dout_rstn
ad_connect sys_cpu_clk util_ad9361_adc_pack/adc_clk
ad_connect sys_cpu_reset util_ad9361_adc_pack/adc_rst
ad_connect sys_cpu_clk axi_ad9361_adc_dma/fifo_wr_clk
ad_connect axi_ad9361/adc_enable_i0 util_ad9361_adc_fifo/din_enable_0
ad_connect axi_ad9361/adc_valid_i0 util_ad9361_adc_fifo/din_valid_0
ad_connect axi_ad9361/adc_data_i0 util_ad9361_adc_fifo/din_data_0
ad_connect axi_ad9361/adc_enable_q0 util_ad9361_adc_fifo/din_enable_1
ad_connect axi_ad9361/adc_valid_q0 util_ad9361_adc_fifo/din_valid_1
ad_connect axi_ad9361/adc_data_q0 util_ad9361_adc_fifo/din_data_1
ad_connect axi_ad9361/adc_enable_i1 util_ad9361_adc_fifo/din_enable_2
ad_connect axi_ad9361/adc_valid_i1 util_ad9361_adc_fifo/din_valid_2
ad_connect axi_ad9361/adc_data_i1 util_ad9361_adc_fifo/din_data_2
ad_connect axi_ad9361/adc_enable_q1 util_ad9361_adc_fifo/din_enable_3
ad_connect axi_ad9361/adc_valid_q1 util_ad9361_adc_fifo/din_valid_3
ad_connect axi_ad9361/adc_data_q1 util_ad9361_adc_fifo/din_data_3
ad_connect util_ad9361_adc_fifo/dout_enable_0 util_ad9361_adc_pack/adc_enable_0
ad_connect util_ad9361_adc_fifo/dout_valid_0 util_ad9361_adc_pack/adc_valid_0
ad_connect util_ad9361_adc_fifo/dout_data_0 util_ad9361_adc_pack/adc_data_0
ad_connect util_ad9361_adc_fifo/dout_enable_1 util_ad9361_adc_pack/adc_enable_1
ad_connect util_ad9361_adc_fifo/dout_valid_1 util_ad9361_adc_pack/adc_valid_1
ad_connect util_ad9361_adc_fifo/dout_data_1 util_ad9361_adc_pack/adc_data_1
ad_connect util_ad9361_adc_fifo/dout_enable_2 util_ad9361_adc_pack/adc_enable_2
ad_connect util_ad9361_adc_fifo/dout_valid_2 util_ad9361_adc_pack/adc_valid_2
ad_connect util_ad9361_adc_fifo/dout_data_2 util_ad9361_adc_pack/adc_data_2
ad_connect util_ad9361_adc_fifo/dout_enable_3 util_ad9361_adc_pack/adc_enable_3
ad_connect util_ad9361_adc_fifo/dout_valid_3 util_ad9361_adc_pack/adc_valid_3
ad_connect util_ad9361_adc_fifo/dout_data_3 util_ad9361_adc_pack/adc_data_3
ad_connect util_ad9361_adc_pack/adc_valid axi_ad9361_adc_dma/fifo_wr_en
ad_connect util_ad9361_adc_pack/adc_sync axi_ad9361_adc_dma/fifo_wr_sync
ad_connect util_ad9361_adc_pack/adc_data axi_ad9361_adc_dma/fifo_wr_din
ad_connect axi_ad9361_adc_dma/fifo_wr_overflow util_ad9361_adc_fifo/dout_ovf
ad_connect util_ad9361_adc_fifo/din_ovf axi_ad9361/adc_dovf
ad_connect axi_ad9361_clk util_ad9361_dac_upack/dac_clk
ad_connect axi_ad9361_clk axi_ad9361_dac_dma/fifo_rd_clk
ad_connect util_ad9361_dac_upack/dac_enable_0 axi_ad9361/dac_enable_i0
ad_connect util_ad9361_dac_upack/dac_valid_0 axi_ad9361/dac_valid_i0
ad_connect util_ad9361_dac_upack/dac_data_0 axi_ad9361/dac_data_i0
ad_connect util_ad9361_dac_upack/dac_enable_1 axi_ad9361/dac_enable_q0
ad_connect util_ad9361_dac_upack/dac_valid_1 axi_ad9361/dac_valid_q0
ad_connect util_ad9361_dac_upack/dac_data_1 axi_ad9361/dac_data_q0
ad_connect util_ad9361_dac_upack/dac_enable_2 axi_ad9361/dac_enable_i1
ad_connect util_ad9361_dac_upack/dac_valid_2 axi_ad9361/dac_valid_i1
ad_connect util_ad9361_dac_upack/dac_data_2 axi_ad9361/dac_data_i1
ad_connect util_ad9361_dac_upack/dac_enable_3 axi_ad9361/dac_enable_q1
ad_connect util_ad9361_dac_upack/dac_valid_3 axi_ad9361/dac_valid_q1
ad_connect util_ad9361_dac_upack/dac_data_3 axi_ad9361/dac_data_q1
ad_connect util_ad9361_dac_upack/dac_valid axi_ad9361_dac_dma/fifo_rd_en
ad_connect util_ad9361_dac_upack/dac_data axi_ad9361_dac_dma/fifo_rd_dout
ad_connect axi_ad9361_dac_dma/fifo_rd_underflow axi_ad9361/dac_dunf
axi_ad9361/tdd: Update the synchronization logic The master will regenerate a sync pulse periodically. The period can be defined by software.
2015-08-19 09:21:23 +00:00
ad_connect tdd_sync_out axi_ad9361/tdd_sync_out
ad_connect tdd_sync_in axi_ad9361/tdd_sync_in
fmcomms2: Add a synchronization interface for TDD mode. Supported carrier are ZC706 and RFSOM. The synchronization pulse is automatically generated by the master terminal, when TDD mode is enabled. By default a terminal is slave, software must write 0x01 into TDD register 0x50.
2015-07-28 11:41:32 +00:00
fmcomms2_tdd: Update tdd_enabaled path This line controls the mux, which switch between hdl and software (GPIO) control of the ENABLE/TXNRX pins. Fix the broken path and change the name from "tdd_enable" to "tdd_enabled".
2015-08-11 09:24:26 +00:00
ad_connect tdd_enabled axi_ad9361/tdd_enabled
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# interconnects
ad_cpu_interconnect 0x79020000 axi_ad9361
ad_cpu_interconnect 0x7C400000 axi_ad9361_adc_dma
ad_cpu_interconnect 0x7C420000 axi_ad9361_dac_dma
ad_mem_hp1_interconnect sys_cpu_clk sys_ps7/S_AXI_HP1
ad_mem_hp1_interconnect sys_cpu_clk axi_ad9361_adc_dma/m_dest_axi
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_cpu_clk axi_ad9361_dac_dma/m_src_axi
ad_connect sys_cpu_resetn axi_ad9361_adc_dma/m_dest_axi_aresetn
ad_connect sys_cpu_resetn axi_ad9361_dac_dma/m_src_axi_aresetn
# interrupts
ad_cpu_interrupt ps-13 mb-12 axi_ad9361_adc_dma/irq
ad_cpu_interrupt ps-12 mb-13 axi_ad9361_dac_dma/irq
# ila (adc)
set ila_adc [create_bd_cell -type ip -vlnv xilinx.com:ip:ila:5.0 ila_adc]
set_property -dict [list CONFIG.C_MONITOR_TYPE {Native}] $ila_adc
set_property -dict [list CONFIG.C_TRIGIN_EN {false}] $ila_adc
set_property -dict [list CONFIG.C_EN_STRG_QUAL {1}] $ila_adc
set_property -dict [list CONFIG.C_NUM_OF_PROBES {5}] $ila_adc
set_property -dict [list CONFIG.C_PROBE0_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE1_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE2_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE3_WIDTH {16}] $ila_adc
set_property -dict [list CONFIG.C_PROBE4_WIDTH {1}] $ila_adc
ad_connect util_ad9361_adc_fifo/dout_data_0 ila_adc/probe0
ad_connect util_ad9361_adc_fifo/dout_data_1 ila_adc/probe1
ad_connect util_ad9361_adc_fifo/dout_data_2 ila_adc/probe2
ad_connect util_ad9361_adc_fifo/dout_data_3 ila_adc/probe3
ad_connect util_ad9361_adc_fifo/dout_valid_0 ila_adc/probe4
ad_connect sys_cpu_clk ila_adc/clk
fmcomms2_ALL: Preserve backward compatibility for ENABLE/TXNRX control By default the ENABLE/TXNRX pins are controlled by GPIOs, if the TDD module is enabled, the TDD FSM will take over the control of these two pins.
2015-07-01 10:54:01 +00:00
# ila (tdd)
set ila_tdd [create_bd_cell -type ip -vlnv xilinx.com:ip:ila:5.0 ila_tdd]
set_property -dict [list CONFIG.C_MONITOR_TYPE {Native}] $ila_tdd
set_property -dict [list CONFIG.C_TRIGIN_EN {false}] $ila_tdd
set_property -dict [list CONFIG.C_EN_STRG_QUAL {1}] $ila_tdd
set_property -dict [list CONFIG.C_NUM_OF_PROBES {4}] $ila_tdd
set_property -dict [list CONFIG.C_PROBE0_WIDTH {1}] $ila_adc
set_property -dict [list CONFIG.C_PROBE1_WIDTH {1}] $ila_adc
set_property -dict [list CONFIG.C_PROBE2_WIDTH {1}] $ila_adc
set_property -dict [list CONFIG.C_PROBE3_WIDTH {35}] $ila_adc
ad_connect axi_ad9361_clk ila_tdd/clk
ad_connect axi_ad9361/enable ila_tdd/probe0
ad_connect axi_ad9361/txnrx ila_tdd/probe1
fmcomms2_tdd: Update tdd_enabaled path This line controls the mux, which switch between hdl and software (GPIO) control of the ENABLE/TXNRX pins. Fix the broken path and change the name from "tdd_enable" to "tdd_enabled".
2015-08-11 09:24:26 +00:00
ad_connect axi_ad9361/tdd_enabled ila_tdd/probe2
fmcomms2_ALL: Preserve backward compatibility for ENABLE/TXNRX control By default the ENABLE/TXNRX pins are controlled by GPIOs, if the TDD module is enabled, the TDD FSM will take over the control of these two pins.
2015-07-01 10:54:01 +00:00
ad_connect axi_ad9361/tdd_dbg ila_tdd/probe3