pluto_hdl_adi/library/common/ad_tdd_control.v

851 lines
22 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2015(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/1ps
module ad_tdd_control(
// clock and reset
clk,
rst,
// TDD timming signals
tdd_enable,
tdd_secondary,
tdd_tx_only,
tdd_rx_only,
tdd_burst_count,
tdd_counter_init,
tdd_frame_length,
tdd_vco_rx_on_1,
tdd_vco_rx_off_1,
tdd_vco_tx_on_1,
tdd_vco_tx_off_1,
tdd_rx_on_1,
tdd_rx_off_1,
tdd_tx_on_1,
tdd_tx_off_1,
tdd_tx_dp_on_1,
tdd_tx_dp_off_1,
tdd_vco_rx_on_2,
tdd_vco_rx_off_2,
tdd_vco_tx_on_2,
tdd_vco_tx_off_2,
tdd_rx_on_2,
tdd_rx_off_2,
tdd_tx_on_2,
tdd_tx_off_2,
tdd_tx_dp_on_2,
tdd_tx_dp_off_2,
tdd_resync,
// TDD control signals
tdd_tx_dp_en,
tdd_rx_vco_en,
tdd_tx_vco_en,
tdd_rx_rf_en,
tdd_tx_rf_en,
tdd_counter_status);
// parameters
parameter integer TX_DATA_PATH_DELAY = 0; // internally eliminate the delay introduced by the TX data path
parameter integer CONTROL_PATH_DELAY = 0; // internally eliminate the delay introduced by the control path
localparam ON = 1;
localparam OFF = 0;
// input/output signals
input clk;
input rst;
input tdd_enable;
input tdd_secondary;
input tdd_tx_only;
input tdd_rx_only;
input [ 7:0] tdd_burst_count;
input [23:0] tdd_counter_init;
input [23:0] tdd_frame_length;
input [23:0] tdd_vco_rx_on_1;
input [23:0] tdd_vco_rx_off_1;
input [23:0] tdd_vco_tx_on_1;
input [23:0] tdd_vco_tx_off_1;
input [23:0] tdd_rx_on_1;
input [23:0] tdd_rx_off_1;
input [23:0] tdd_tx_on_1;
input [23:0] tdd_tx_off_1;
input [23:0] tdd_tx_dp_on_1;
input [23:0] tdd_tx_dp_off_1;
input [23:0] tdd_vco_rx_on_2;
input [23:0] tdd_vco_rx_off_2;
input [23:0] tdd_vco_tx_on_2;
input [23:0] tdd_vco_tx_off_2;
input [23:0] tdd_rx_on_2;
input [23:0] tdd_rx_off_2;
input [23:0] tdd_tx_on_2;
input [23:0] tdd_tx_off_2;
input [23:0] tdd_tx_dp_on_2;
input [23:0] tdd_tx_dp_off_2;
input tdd_resync;
output tdd_tx_dp_en; // initiate vco tx2rx switch
output tdd_rx_vco_en; // initiate vco rx2tx switch
output tdd_tx_vco_en; // power up RF Rx
output tdd_rx_rf_en; // power up RF Tx
output tdd_tx_rf_en; // enable Tx datapath
output [23:0] tdd_counter_status;
// tdd control related
reg tdd_tx_dp_en = 1'b0;
reg tdd_rx_vco_en = 1'b0;
reg tdd_tx_vco_en = 1'b0;
reg tdd_rx_rf_en = 1'b0;
reg tdd_tx_rf_en = 1'b0;
// tdd counter related
reg [23:0] tdd_counter = 24'h0;
reg [ 5:0] tdd_burst_counter = 6'h0;
reg tdd_counter_state = OFF;
reg counter_at_tdd_vco_rx_on_1 = 1'b0;
reg counter_at_tdd_vco_rx_off_1 = 1'b0;
reg counter_at_tdd_vco_tx_on_1 = 1'b0;
reg counter_at_tdd_vco_tx_off_1 = 1'b0;
reg counter_at_tdd_rx_on_1 = 1'b0;
reg counter_at_tdd_rx_off_1 = 1'b0;
reg counter_at_tdd_tx_on_1 = 1'b0;
reg counter_at_tdd_tx_off_1 = 1'b0;
reg counter_at_tdd_tx_dp_on_1 = 1'b0;
reg counter_at_tdd_tx_dp_off_1 = 1'b0;
reg counter_at_tdd_vco_rx_on_2 = 1'b0;
reg counter_at_tdd_vco_rx_off_2 = 1'b0;
reg counter_at_tdd_vco_tx_on_2 = 1'b0;
reg counter_at_tdd_vco_tx_off_2 = 1'b0;
reg counter_at_tdd_rx_on_2 = 1'b0;
reg counter_at_tdd_rx_off_2 = 1'b0;
reg counter_at_tdd_tx_on_2 = 1'b0;
reg counter_at_tdd_tx_off_2 = 1'b0;
reg counter_at_tdd_tx_dp_on_2 = 1'b0;
reg counter_at_tdd_tx_dp_off_2 = 1'b0;
reg tdd_enable_d = 1'h0;
// internal signals
wire [23:0] tdd_vco_rx_on_1_s;
wire [23:0] tdd_vco_rx_off_1_s;
wire [23:0] tdd_vco_tx_on_1_s;
wire [23:0] tdd_vco_tx_off_1_s;
wire [23:0] tdd_rx_on_1_s;
wire [23:0] tdd_rx_off_1_s;
wire [23:0] tdd_tx_on_1_s;
wire [23:0] tdd_tx_off_1_s;
wire [23:0] tdd_tx_dp_on_1_s;
wire [23:0] tdd_tx_dp_off_1_s;
wire [23:0] tdd_vco_rx_on_2_s;
wire [23:0] tdd_vco_rx_off_2_s;
wire [23:0] tdd_vco_tx_on_2_s;
wire [23:0] tdd_vco_tx_off_2_s;
wire [23:0] tdd_rx_on_2_s;
wire [23:0] tdd_rx_off_2_s;
wire [23:0] tdd_tx_on_2_s;
wire [23:0] tdd_tx_off_2_s;
wire [23:0] tdd_tx_dp_on_2_s;
wire [23:0] tdd_tx_dp_off_2_s;
wire tdd_txrx_only_en_s;
assign tdd_counter_status = tdd_counter;
// ***************************************************************************
// tdd counter (state machine)
// ***************************************************************************
always @(posedge clk) begin
// sync reset
if (rst == 1'b1) begin
tdd_counter <= 24'h0;
tdd_counter_state <= OFF;
end else begin
tdd_enable_d <= tdd_enable;
// counter reset
if (tdd_enable == 1'b0) begin
tdd_counter_state <= OFF;
end else
// start counter on the positive edge of the tdd_enable
if ((tdd_enable == 1'b1) && (tdd_enable_d == 1'b0)) begin
tdd_counter <= tdd_counter_init;
tdd_burst_counter <= tdd_burst_count;
tdd_counter_state <= ON;
end else
// resync slave to master
if (tdd_resync == 1'b1) begin
tdd_counter <= 24'b0;
end
// free running counter
if (tdd_counter_state == ON) begin
if (tdd_counter == tdd_frame_length) begin
tdd_counter <= 22'h0;
if (tdd_burst_counter > 1) begin // inside a burst
tdd_burst_counter <= tdd_burst_counter - 1;
tdd_counter_state <= ON;
end
else
if ( tdd_burst_counter == 1) begin // end of burst
tdd_burst_counter <= 6'h0;
tdd_counter_state <= OFF;
end
else begin // contiuous mode
tdd_burst_counter <= 6'h0;
tdd_counter_state <= ON;
end
end
else begin
tdd_counter <= tdd_counter + 1;
end
end
end
end
// ***************************************************************************
// generate control signals
// ***************************************************************************
// start/stop rx vco
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_on_1 <= 1'b0;
end else
if(tdd_counter == tdd_vco_rx_on_1_s) begin
counter_at_tdd_vco_rx_on_1 <= 1'b1;
end
else begin
counter_at_tdd_vco_rx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_on_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_rx_on_2_s)) begin
counter_at_tdd_vco_rx_on_2 <= 1'b1;
end
else begin
counter_at_tdd_vco_rx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_off_1 <= 1'b0;
end else
if(tdd_counter == tdd_vco_rx_off_1_s) begin
counter_at_tdd_vco_rx_off_1 <= 1'b1;
end
else begin
counter_at_tdd_vco_rx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_off_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_rx_off_2_s)) begin
counter_at_tdd_vco_rx_off_2 <= 1'b1;
end
else begin
counter_at_tdd_vco_rx_off_2 <= 1'b0;
end
end
// start/stop tx vco
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_on_1 <= 1'b0;
end else
if(tdd_counter == tdd_vco_tx_on_1_s) begin
counter_at_tdd_vco_tx_on_1 <= 1'b1;
end
else begin
counter_at_tdd_vco_tx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_on_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_tx_on_2_s)) begin
counter_at_tdd_vco_tx_on_2 <= 1'b1;
end
else begin
counter_at_tdd_vco_tx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_off_1 <= 1'b0;
end else
if(tdd_counter == tdd_vco_tx_off_1_s) begin
counter_at_tdd_vco_tx_off_1 <= 1'b1;
end
else begin
counter_at_tdd_vco_tx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_off_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_tx_off_2_s)) begin
counter_at_tdd_vco_tx_off_2 <= 1'b1;
end
else begin
counter_at_tdd_vco_tx_off_2 <= 1'b0;
end
end
// start/stop rx rf path
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_on_1 <= 1'b0;
end else
if(tdd_counter == tdd_rx_on_1_s) begin
counter_at_tdd_rx_on_1 <= 1'b1;
end
else begin
counter_at_tdd_rx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_on_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_rx_on_2_s)) begin
counter_at_tdd_rx_on_2 <= 1'b1;
end
else begin
counter_at_tdd_rx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_off_1 <= 1'b0;
end else
if(tdd_counter == tdd_rx_off_1_s) begin
counter_at_tdd_rx_off_1 <= 1'b1;
end
else begin
counter_at_tdd_rx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_off_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_rx_off_2_s)) begin
counter_at_tdd_rx_off_2 <= 1'b1;
end
else begin
counter_at_tdd_rx_off_2 <= 1'b0;
end
end
// start/stop tx rf path
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_on_1 <= 1'b0;
end else
if(tdd_counter == tdd_tx_on_1_s) begin
counter_at_tdd_tx_on_1 <= 1'b1;
end
else begin
counter_at_tdd_tx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_on_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_on_2_s)) begin
counter_at_tdd_tx_on_2 <= 1'b1;
end
else begin
counter_at_tdd_tx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_off_1 <= 1'b0;
end else
if(tdd_counter == tdd_tx_off_1_s) begin
counter_at_tdd_tx_off_1 <= 1'b1;
end
else begin
counter_at_tdd_tx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_off_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_off_2_s)) begin
counter_at_tdd_tx_off_2 <= 1'b1;
end
else begin
counter_at_tdd_tx_off_2 <= 1'b0;
end
end
// start/stop tx data path
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_on_1 <= 1'b0;
end else
if(tdd_counter == tdd_tx_dp_on_1_s) begin
counter_at_tdd_tx_dp_on_1 <= 1'b1;
end
else begin
counter_at_tdd_tx_dp_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_on_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_dp_on_2_s)) begin
counter_at_tdd_tx_dp_on_2 <= 1'b1;
end
else begin
counter_at_tdd_tx_dp_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_off_1 <= 1'b0;
end else
if(tdd_counter == tdd_tx_dp_off_1_s) begin
counter_at_tdd_tx_dp_off_1 <= 1'b1;
end
else begin
counter_at_tdd_tx_dp_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_off_2 <= 1'b0;
end else
if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_dp_off_2_s)) begin
counter_at_tdd_tx_dp_off_2 <= 1'b1;
end
else begin
counter_at_tdd_tx_dp_off_2 <= 1'b0;
end
end
// control-path delay compensation
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_on_1_comp (
.clk(clk),
.A(tdd_vco_rx_on_1),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_off_1_comp (
.clk(clk),
.A(tdd_vco_rx_off_1),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_on_1_comp (
.clk(clk),
.A(tdd_vco_tx_on_1),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_off_1_comp (
.clk(clk),
.A(tdd_vco_tx_off_1),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_on_1_comp (
.clk(clk),
.A(tdd_rx_on_1),
.Amax(tdd_frame_length),
.out(tdd_rx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_off_1_comp (
.clk(clk),
.A(tdd_rx_off_1),
.Amax(tdd_frame_length),
.out(tdd_rx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_on_1_comp (
.clk(clk),
.A(tdd_tx_on_1),
.Amax(tdd_frame_length),
.out(tdd_tx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_off_1_comp (
.clk(clk),
.A(tdd_tx_off_1),
.Amax(tdd_frame_length),
.out(tdd_tx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_on_2_comp (
.clk(clk),
.A(tdd_vco_rx_on_2),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_off_2_comp (
.clk(clk),
.A(tdd_vco_rx_off_2),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_off_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_on_2_comp (
.clk(clk),
.A(tdd_vco_tx_on_2),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_off_2_comp (
.clk(clk),
.A(tdd_vco_tx_off_2),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_off_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_on_2_comp (
.clk(clk),
.A(tdd_rx_on_2),
.Amax(tdd_frame_length),
.out(tdd_rx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_off_2_comp (
.clk(clk),
.A(tdd_rx_off_2),
.Amax(tdd_frame_length),
.out(tdd_rx_off_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_on_2_comp (
.clk(clk),
.A(tdd_tx_on_2),
.Amax(tdd_frame_length),
.out(tdd_tx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_off_2_comp (
.clk(clk),
.A(tdd_tx_off_2),
.Amax(tdd_frame_length),
.out(tdd_tx_off_2_s),
.CE(1'b1)
);
// internal data-path delay compensation
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_on_1_comp (
.clk(clk),
.A(tdd_tx_dp_on_1),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_on_1_s),
.CE(1'b1)
);
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_on_2_comp (
.clk(clk),
.A(tdd_tx_dp_on_2),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_on_2_s),
.CE(1'b1)
);
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_off_1_comp (
.clk(clk),
.A(tdd_tx_dp_off_1),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_off_1_s),
.CE(1'b1)
);
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_off_2_comp (
.clk(clk),
.A(tdd_tx_dp_off_2),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_off_2_s),
.CE(1'b1)
);
// output logic
assign tdd_txrx_only_en_s = tdd_tx_only ^ tdd_rx_only;
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_rx_vco_en <= 1'b0;
end
else if((tdd_counter_state == OFF) || (counter_at_tdd_vco_rx_off_1 == 1'b1) || (counter_at_tdd_vco_rx_off_2 == 1'b1)) begin
tdd_rx_vco_en <= 1'b0;
end
else if((tdd_counter_state == ON) && ((counter_at_tdd_vco_rx_on_1 == 1'b1) || (counter_at_tdd_vco_rx_on_2 == 1'b1))) begin
tdd_rx_vco_en <= 1'b1;
end
else if((tdd_counter_state == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_rx_vco_en <= tdd_rx_only;
end
else begin
tdd_rx_vco_en <= tdd_rx_vco_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_tx_vco_en <= 1'b0;
end
else if((tdd_counter_state == OFF) || (counter_at_tdd_vco_tx_off_1 == 1'b1) || (counter_at_tdd_vco_tx_off_2 == 1'b1)) begin
tdd_tx_vco_en <= 1'b0;
end
else if((tdd_counter_state == ON) && ((counter_at_tdd_vco_tx_on_1 == 1'b1) || (counter_at_tdd_vco_tx_on_2 == 1'b1))) begin
tdd_tx_vco_en <= 1'b1;
end
else if((tdd_counter_state == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_tx_vco_en <= tdd_tx_only;
end
else begin
tdd_tx_vco_en <= tdd_tx_vco_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_rx_rf_en <= 1'b0;
end
else if((tdd_counter_state == OFF) || (counter_at_tdd_rx_off_1 == 1'b1) || (counter_at_tdd_rx_off_2 == 1'b1)) begin
tdd_rx_rf_en <= 1'b0;
end
else if((tdd_counter_state == ON) && ((counter_at_tdd_rx_on_1 == 1'b1) || (counter_at_tdd_rx_on_2 == 1'b1))) begin
tdd_rx_rf_en <= 1'b1;
end
else if((tdd_counter_state == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_rx_rf_en <= tdd_rx_only;
end
else begin
tdd_rx_rf_en <= tdd_rx_rf_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_tx_rf_en <= 1'b0;
end
else if((tdd_counter_state == OFF) || (counter_at_tdd_tx_off_1 == 1'b1) || (counter_at_tdd_tx_off_2 == 1'b1)) begin
tdd_tx_rf_en <= 1'b0;
end
else if((tdd_counter_state == ON) && ((counter_at_tdd_tx_on_1 == 1'b1) || (counter_at_tdd_tx_on_2 == 1'b1))) begin
tdd_tx_rf_en <= 1'b1;
end
else if((tdd_counter_state == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_tx_rf_en <= tdd_tx_only;
end
else begin
tdd_tx_rf_en <= tdd_tx_rf_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_tx_dp_en <= 1'b0;
end
else if((tdd_counter_state == OFF) || (counter_at_tdd_tx_dp_off_1 == 1'b1) || (counter_at_tdd_tx_dp_off_2 == 1'b1)) begin
tdd_tx_dp_en <= 1'b0;
end
else if((tdd_counter_state == ON) && ((counter_at_tdd_tx_dp_on_1 == 1'b1) || (counter_at_tdd_tx_dp_on_2 == 1'b1))) begin
tdd_tx_dp_en <= 1'b1;
end
else if((tdd_counter_state == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_tx_dp_en <= tdd_tx_only;
end
else begin
tdd_tx_dp_en <= tdd_tx_dp_en;
end
end
endmodule