pluto_hdl_adi/projects/ad9213_dual_ebz/s10soc/system_constr.sdc

17 lines
1.1 KiB
Plaintext
Raw Normal View History

###############################################################################
## Copyright (C) 2021-2023 Analog Devices, Inc. All rights reserved.
### SPDX short identifier: ADIBSD
###############################################################################
ad9213_dual_ebz: Initial commit Used ADF4377 SPI configuration CPOL/CPHA 1 for increasing the reliability of the level translators ad9213_dual_ebz/s10soc: Redesign the address layout avl_peripheral_mm_bridge 0x0000000 0x0001FFFF * sys_gpio_in 0x00000000 * sys_gpio_out 0x00000020 * sys_spi 0x00000040 * sys_gpio_bd 0x000000D0 * sys_id 0x000000E0 avl_mm_bridge_0 0x00040000 0x0007FFFF * ad9213_rx_0.phy_reconfig_0 0x00000000 * ad9213_rx_0.phy_reconfig_1 0x00002000 * ad9213_rx_0.phy_reconfig_2 0x00004000 * ad9213_rx_0.phy_reconfig_3 0x00006000 * ad9213_rx_0.phy_reconfig_4 0x00008000 * ad9213_rx_0.phy_reconfig_5 0x0000A000 * ad9213_rx_0.phy_reconfig_6 0x0000C000 * ad9213_rx_0.phy_reconfig_7 0x0000E000 * ad9213_rx_0.phy_reconfig_8 0x00010000 * ad9213_rx_0.phy_reconfig_9 0x00012000 * ad9213_rx_0.phy_reconfig_10 0x00014000 * ad9213_rx_0.phy_reconfig_11 0x00016000 * ad9213_rx_0.phy_reconfig_12 0x00018000 * ad9213_rx_0.phy_reconfig_13 0x0001A000 * ad9213_rx_0.phy_reconfig_14 0x0001C000 * ad9213_rx_0.phy_reconfig_15 0x0001E000 * ad9213_rx_0.link_pll_reconfig 0x00020000 avl_mm_bridge_1 0x00080000 0x000BFFFF * ad9213_rx_1.phy_reconfig_0 0x00000000 * ad9213_rx_1.phy_reconfig_1 0x00002000 * ad9213_rx_1.phy_reconfig_2 0x00004000 * ad9213_rx_1.phy_reconfig_3 0x00006000 * ad9213_rx_1.phy_reconfig_4 0x00008000 * ad9213_rx_1.phy_reconfig_5 0x0000A000 * ad9213_rx_1.phy_reconfig_6 0x0000C000 * ad9213_rx_1.phy_reconfig_7 0x0000E000 * ad9213_rx_1.phy_reconfig_8 0x00010000 * ad9213_rx_1.phy_reconfig_9 0x00012000 * ad9213_rx_1.phy_reconfig_10 0x00014000 * ad9213_rx_1.phy_reconfig_11 0x00016000 * ad9213_rx_1.phy_reconfig_12 0x00018000 * ad9213_rx_1.phy_reconfig_13 0x0001A000 * ad9213_rx_1.phy_reconfig_14 0x0001C000 * ad9213_rx_1.phy_reconfig_15 0x0001E000 * ad9213_rx_1.link_pll_reconfig 0x00020000 Connected directly to the h2s_lw_axi_master * ad9213_rx_0.link_reconfig 0x000C0000 * ad9213_rx_0.link_management 0x000C4000 * ad9213_rx_1.link_reconfig 0x000C8000 * ad9213_rx_1.link_management 0x000CC000 * axi_ad9213_0.s_axi 0x000D0000 * axi_ad9213_1.s_axi 0x000D1000 * axi_ad9213_dma_0.s_axi 0x000D2000 * axi_ad9213_dma_1.s_axi 0x000D3800
2019-09-09 14:06:06 +00:00
create_clock -period "10.000 ns" -name sys_clk_100mhz [get_ports {sys_clk}]
ad9213_dual_ebz: Initial commit Used ADF4377 SPI configuration CPOL/CPHA 1 for increasing the reliability of the level translators ad9213_dual_ebz/s10soc: Redesign the address layout avl_peripheral_mm_bridge 0x0000000 0x0001FFFF * sys_gpio_in 0x00000000 * sys_gpio_out 0x00000020 * sys_spi 0x00000040 * sys_gpio_bd 0x000000D0 * sys_id 0x000000E0 avl_mm_bridge_0 0x00040000 0x0007FFFF * ad9213_rx_0.phy_reconfig_0 0x00000000 * ad9213_rx_0.phy_reconfig_1 0x00002000 * ad9213_rx_0.phy_reconfig_2 0x00004000 * ad9213_rx_0.phy_reconfig_3 0x00006000 * ad9213_rx_0.phy_reconfig_4 0x00008000 * ad9213_rx_0.phy_reconfig_5 0x0000A000 * ad9213_rx_0.phy_reconfig_6 0x0000C000 * ad9213_rx_0.phy_reconfig_7 0x0000E000 * ad9213_rx_0.phy_reconfig_8 0x00010000 * ad9213_rx_0.phy_reconfig_9 0x00012000 * ad9213_rx_0.phy_reconfig_10 0x00014000 * ad9213_rx_0.phy_reconfig_11 0x00016000 * ad9213_rx_0.phy_reconfig_12 0x00018000 * ad9213_rx_0.phy_reconfig_13 0x0001A000 * ad9213_rx_0.phy_reconfig_14 0x0001C000 * ad9213_rx_0.phy_reconfig_15 0x0001E000 * ad9213_rx_0.link_pll_reconfig 0x00020000 avl_mm_bridge_1 0x00080000 0x000BFFFF * ad9213_rx_1.phy_reconfig_0 0x00000000 * ad9213_rx_1.phy_reconfig_1 0x00002000 * ad9213_rx_1.phy_reconfig_2 0x00004000 * ad9213_rx_1.phy_reconfig_3 0x00006000 * ad9213_rx_1.phy_reconfig_4 0x00008000 * ad9213_rx_1.phy_reconfig_5 0x0000A000 * ad9213_rx_1.phy_reconfig_6 0x0000C000 * ad9213_rx_1.phy_reconfig_7 0x0000E000 * ad9213_rx_1.phy_reconfig_8 0x00010000 * ad9213_rx_1.phy_reconfig_9 0x00012000 * ad9213_rx_1.phy_reconfig_10 0x00014000 * ad9213_rx_1.phy_reconfig_11 0x00016000 * ad9213_rx_1.phy_reconfig_12 0x00018000 * ad9213_rx_1.phy_reconfig_13 0x0001A000 * ad9213_rx_1.phy_reconfig_14 0x0001C000 * ad9213_rx_1.phy_reconfig_15 0x0001E000 * ad9213_rx_1.link_pll_reconfig 0x00020000 Connected directly to the h2s_lw_axi_master * ad9213_rx_0.link_reconfig 0x000C0000 * ad9213_rx_0.link_management 0x000C4000 * ad9213_rx_1.link_reconfig 0x000C8000 * ad9213_rx_1.link_management 0x000CC000 * axi_ad9213_0.s_axi 0x000D0000 * axi_ad9213_1.s_axi 0x000D1000 * axi_ad9213_dma_0.s_axi 0x000D2000 * axi_ad9213_dma_1.s_axi 0x000D3800
2019-09-09 14:06:06 +00:00
create_clock -period "3.2 ns" -name ref_a_clk0 [get_ports {rx_ref_a_clk0}]
create_clock -period "3.2 ns" -name ref_a_clk1 [get_ports {rx_ref_a_clk1}]
create_clock -period "3.2 ns" -name ref_b_clk0 [get_ports {rx_ref_b_clk0}]
create_clock -period "3.2 ns" -name ref_b_clk1 [get_ports {rx_ref_b_clk1}]
create_clock -period "3.2 ns" -name device_clk [get_ports {rx_device_clk_0}]
set_input_delay -clock {device_clk} 0.2 [get_ports {rx_sysref_a}]
ad9213_dual_ebz: Initial commit Used ADF4377 SPI configuration CPOL/CPHA 1 for increasing the reliability of the level translators ad9213_dual_ebz/s10soc: Redesign the address layout avl_peripheral_mm_bridge 0x0000000 0x0001FFFF * sys_gpio_in 0x00000000 * sys_gpio_out 0x00000020 * sys_spi 0x00000040 * sys_gpio_bd 0x000000D0 * sys_id 0x000000E0 avl_mm_bridge_0 0x00040000 0x0007FFFF * ad9213_rx_0.phy_reconfig_0 0x00000000 * ad9213_rx_0.phy_reconfig_1 0x00002000 * ad9213_rx_0.phy_reconfig_2 0x00004000 * ad9213_rx_0.phy_reconfig_3 0x00006000 * ad9213_rx_0.phy_reconfig_4 0x00008000 * ad9213_rx_0.phy_reconfig_5 0x0000A000 * ad9213_rx_0.phy_reconfig_6 0x0000C000 * ad9213_rx_0.phy_reconfig_7 0x0000E000 * ad9213_rx_0.phy_reconfig_8 0x00010000 * ad9213_rx_0.phy_reconfig_9 0x00012000 * ad9213_rx_0.phy_reconfig_10 0x00014000 * ad9213_rx_0.phy_reconfig_11 0x00016000 * ad9213_rx_0.phy_reconfig_12 0x00018000 * ad9213_rx_0.phy_reconfig_13 0x0001A000 * ad9213_rx_0.phy_reconfig_14 0x0001C000 * ad9213_rx_0.phy_reconfig_15 0x0001E000 * ad9213_rx_0.link_pll_reconfig 0x00020000 avl_mm_bridge_1 0x00080000 0x000BFFFF * ad9213_rx_1.phy_reconfig_0 0x00000000 * ad9213_rx_1.phy_reconfig_1 0x00002000 * ad9213_rx_1.phy_reconfig_2 0x00004000 * ad9213_rx_1.phy_reconfig_3 0x00006000 * ad9213_rx_1.phy_reconfig_4 0x00008000 * ad9213_rx_1.phy_reconfig_5 0x0000A000 * ad9213_rx_1.phy_reconfig_6 0x0000C000 * ad9213_rx_1.phy_reconfig_7 0x0000E000 * ad9213_rx_1.phy_reconfig_8 0x00010000 * ad9213_rx_1.phy_reconfig_9 0x00012000 * ad9213_rx_1.phy_reconfig_10 0x00014000 * ad9213_rx_1.phy_reconfig_11 0x00016000 * ad9213_rx_1.phy_reconfig_12 0x00018000 * ad9213_rx_1.phy_reconfig_13 0x0001A000 * ad9213_rx_1.phy_reconfig_14 0x0001C000 * ad9213_rx_1.phy_reconfig_15 0x0001E000 * ad9213_rx_1.link_pll_reconfig 0x00020000 Connected directly to the h2s_lw_axi_master * ad9213_rx_0.link_reconfig 0x000C0000 * ad9213_rx_0.link_management 0x000C4000 * ad9213_rx_1.link_reconfig 0x000C8000 * ad9213_rx_1.link_management 0x000CC000 * axi_ad9213_0.s_axi 0x000D0000 * axi_ad9213_1.s_axi 0x000D1000 * axi_ad9213_dma_0.s_axi 0x000D2000 * axi_ad9213_dma_1.s_axi 0x000D3800
2019-09-09 14:06:06 +00:00
set_false_path -from [get_registers *altera_reset_synchronizer:alt_rst_sync_uq1|altera_reset_synchronizer_int_chain_out*]
set_false_path -from [get_keepers -no_duplicates {i_system_bd|sys_gpio_out|sys_gpio_out|data_out[2]}] -to [get_keepers -no_duplicates {adc_swap_d1}]