pluto_hdl_adi/library/axi_ad9434/axi_ad9434_if.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
// USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module axi_ad9434_if #(

  parameter DEVICE_TYPE = 0,
  parameter IO_DELAY_GROUP = "dev_if_delay_group") (

  // device interface
  input                   adc_clk_in_p,
  input                   adc_clk_in_n,
  input       [11:0]      adc_data_in_p,
  input       [11:0]      adc_data_in_n,
  input                   adc_or_in_p,
  input                   adc_or_in_n,

  // interface outputs
  output      [47:0]      adc_data,
  output                  adc_or,

  // internl reset and clocks
  output                  adc_clk,
  input                   adc_rst,
  output  reg             adc_status,

  // delay interface (for IDELAY macros)
  input                   up_clk,
  input       [12:0]      up_adc_dld,
  input       [64:0]      up_adc_dwdata,
  output      [64:0]      up_adc_drdata,
  input                   delay_clk,
  input                   delay_rst,
  output                  delay_locked,

  // mmcm reset
  input                   mmcm_rst,

  // drp interface for MMCM_OR_BUFR_N
  input                   up_rstn,
  input                   up_drp_sel,
  input                   up_drp_wr,
  input       [11:0]      up_drp_addr,
  input       [31:0]      up_drp_wdata,
  output      [31:0]      up_drp_rdata,
  output                  up_drp_ready,
  output                  up_drp_locked);


  localparam SDR = 0;

  // internal registers

  reg             adc_status_m1 = 'd0;

  // internal signals

  wire    [3:0]   adc_or_s;

  wire            adc_clk_in;
  wire            adc_div_clk;

  genvar          l_inst;

  // output assignment for adc clock (1:4 of the sampling clock)
  assign  adc_clk = adc_div_clk;

  // data interface
  ad_serdes_in #(
    .DEVICE_TYPE(DEVICE_TYPE),
    .IODELAY_CTRL(0),
    .IODELAY_GROUP(IO_DELAY_GROUP),
    .DDR_OR_SDR_N(SDR),
    .DATA_WIDTH(12))
  i_adc_data (
    .rst(adc_rst),
    .clk(adc_clk_in),
    .div_clk(adc_div_clk),
    .loaden(1'b0),
    .phase(8'b0),
    .locked(1'b0),
    .data_s0(adc_data[47:36]),
    .data_s1(adc_data[35:24]),
    .data_s2(adc_data[23:12]),
    .data_s3(adc_data[11: 0]),
    .data_s4(),
    .data_s5(),
    .data_s6(),
    .data_s7(),
    .data_in_p(adc_data_in_p),
    .data_in_n(adc_data_in_n),
    .up_clk (up_clk),
    .up_dld (up_adc_dld[11:0]),
    .up_dwdata (up_adc_dwdata[59:0]),
    .up_drdata (up_adc_drdata[59:0]),
    .delay_clk(delay_clk),
    .delay_rst(delay_rst),
    .delay_locked());

  // over-range interface
  ad_serdes_in #(
    .DEVICE_TYPE(DEVICE_TYPE),
    .IODELAY_CTRL(1),
    .IODELAY_GROUP(IO_DELAY_GROUP),
    .DDR_OR_SDR_N(SDR),
    .DATA_WIDTH(1))
  i_adc_or (
    .rst(adc_rst),
    .clk(adc_clk_in),
    .div_clk(adc_div_clk),
    .loaden(1'b0),
    .phase(8'b0),
    .locked(1'b0),
    .data_s0(adc_or_s[3]),
    .data_s1(adc_or_s[2]),
    .data_s2(adc_or_s[1]),
    .data_s3(adc_or_s[0]),
    .data_s4(),
    .data_s5(),
    .data_s6(),
    .data_s7(),
    .data_in_p(adc_or_in_p),
    .data_in_n(adc_or_in_n),
    .up_clk (up_clk),
    .up_dld (up_adc_dld[12]),
    .up_dwdata (up_adc_dwdata[64:60]),
    .up_drdata (up_adc_drdata[64:60]),
    .delay_clk(delay_clk),
    .delay_rst(delay_rst),
    .delay_locked(delay_locked));

  // clock input buffers and MMCM_OR_BUFR_N
  ad_serdes_clk #(
    .DEVICE_TYPE (DEVICE_TYPE),
    .CLKIN_DS_OR_SE_N (1),
    .MMCM_OR_BUFR_N (1),
    .MMCM_CLKIN_PERIOD (2),
    .MMCM_VCO_DIV (6),
    .MMCM_VCO_MUL (12),
    .MMCM_CLK0_DIV (2),
    .MMCM_CLK1_DIV (8))
  i_serdes_clk (
    .rst (mmcm_rst),
    .clk_in_p (adc_clk_in_p),
    .clk_in_n (adc_clk_in_n),
    .clk (adc_clk_in),
    .div_clk (adc_div_clk),
    .out_clk (),
    .loaden (),
    .phase (),
    .up_clk (up_clk),
    .up_rstn (up_rstn),
    .up_drp_sel (up_drp_sel),
    .up_drp_wr (up_drp_wr),
    .up_drp_addr (up_drp_addr),
    .up_drp_wdata (up_drp_wdata),
    .up_drp_rdata (up_drp_rdata),
    .up_drp_ready (up_drp_ready),
    .up_drp_locked (up_drp_locked));

  // adc over range
  assign adc_or = adc_or_s[0] | adc_or_s[1] | adc_or_s[2] | adc_or_s[3];

  // adc status: adc is up, if both the MMCM_OR_BUFR_N and DELAY blocks are up
  always @(posedge adc_div_clk) begin
    if(adc_rst == 1'b1) begin
      adc_status_m1 <= 1'b0;
      adc_status <= 1'b0;
    end else begin
      adc_status_m1 <= up_drp_locked & delay_locked;
      adc_status <= adc_status_m1;
    end
  end

endmodule