zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/fmcadc2/common/fmcadc2_bd.tcl

92 lines
4.4 KiB
Tcl
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# adc peripherals
set axi_ad9625_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9625:1.0 axi_ad9625_core]
fmcadc2: Update common design to Vivado 2016.2
2016-08-30 13:42:58 +00:00
set axi_ad9625_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:7.0 axi_ad9625_jesd]
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {0}] $axi_ad9625_jesd
set_property -dict [list CONFIG.C_LANES {8}] $axi_ad9625_jesd
fmcadc2: xcvr updates
2016-11-21 16:45:38 +00:00
set axi_ad9625_xcvr [create_bd_cell -type ip -vlnv analog.com:user:axi_adxcvr:1.0 axi_ad9625_xcvr]
set_property -dict [list CONFIG.NUM_OF_LANES {8}] $axi_ad9625_xcvr
set_property -dict [list CONFIG.QPLL_ENABLE {0}] $axi_ad9625_xcvr
set_property -dict [list CONFIG.TX_OR_RX_N {0}] $axi_ad9625_xcvr
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
set axi_ad9625_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9625_dma]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DMA_TYPE_SRC {1}] $axi_ad9625_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_ad9625_dma
set_property -dict [list CONFIG.ID {0}] $axi_ad9625_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9625_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {0}] $axi_ad9625_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {0}] $axi_ad9625_dma
set_property -dict [list CONFIG.DMA_LENGTH_WIDTH {24}] $axi_ad9625_dma
axi_dmac: Change parameter name 2D_TRANSFER Parameter name can't start with numbers, 2D_TRANSFER was changed to DMA_2D_TRANSFER
2015-08-20 07:13:39 +00:00
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9625_dma
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CYCLIC {0}] $axi_ad9625_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_ad9625_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_ad9625_dma
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
fmcadc2: xcvr updates
2016-11-21 16:45:38 +00:00
set util_fmcadc2_xcvr [create_bd_cell -type ip -vlnv analog.com:user:util_adxcvr:1.0 util_fmcadc2_xcvr]
fmcadc2: Updates
2016-12-07 19:35:53 +00:00
set_property -dict [list CONFIG.QPLL_FBDIV {"0010000000"}] $util_fmcadc2_xcvr ;# N = 40
set_property -dict [list CONFIG.CPLL_FBDIV {1}] $util_fmcadc2_xcvr
fmcadc2: xcvr updates
2016-11-21 16:45:38 +00:00
set_property -dict [list CONFIG.TX_NUM_OF_LANES {0}] $util_fmcadc2_xcvr
fmcadc2: Updates
2016-12-07 19:35:53 +00:00
set_property -dict [list CONFIG.TX_OUT_DIV {1}] $util_fmcadc2_xcvr
set_property -dict [list CONFIG.TX_CLK25_DIV {25}] $util_fmcadc2_xcvr
projects/- xcvr updates
2016-11-22 21:23:05 +00:00
set_property -dict [list CONFIG.RX_NUM_OF_LANES {8}] $util_fmcadc2_xcvr
set_property -dict [list CONFIG.RX_OUT_DIV {1}] $util_fmcadc2_xcvr
fmcadc2: Updates
2016-12-07 19:35:53 +00:00
set_property -dict [list CONFIG.RX_CLK25_DIV {25}] $util_fmcadc2_xcvr
projects/- xcvr updates
2016-11-22 21:23:05 +00:00
set_property -dict [list CONFIG.RX_DFE_LPM_CFG {0x0904}] $util_fmcadc2_xcvr
fmcadc2: Updates
2016-12-07 19:35:53 +00:00
set_property -dict [list CONFIG.RX_CDR_CFG {0x03000023ff20400020}] $util_fmcadc2_xcvr ;# DFE mode refclk +-200
fmcadc2: xcvr updates
2016-11-21 16:45:38 +00:00
projects/- xcvr updates
2016-11-22 21:23:05 +00:00
# reference clocks & resets
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
projects/- xcvr updates
2016-11-22 21:23:05 +00:00
create_bd_port -dir I rx_ref_clk_0
fmcadc2: Updates
2016-12-07 19:35:53 +00:00
create_bd_port -dir O rx_clk
projects/- xcvr updates
2016-11-22 21:23:05 +00:00
ad_xcvrpll rx_ref_clk_0 util_fmcadc2_xcvr/qpll_ref_clk_*
ad_xcvrpll rx_ref_clk_0 util_fmcadc2_xcvr/cpll_ref_clk_*
ad_xcvrpll axi_ad9625_xcvr/up_pll_rst util_fmcadc2_xcvr/up_qpll_rst_*
ad_xcvrpll axi_ad9625_xcvr/up_pll_rst util_fmcadc2_xcvr/up_cpll_rst_*
ad_connect sys_cpu_resetn util_fmcadc2_xcvr/up_rstn
ad_connect sys_cpu_clk util_fmcadc2_xcvr/up_clk
fmcadc2: Updates
2016-12-07 19:35:53 +00:00
ad_connect util_fmcadc2_xcvr/rx_out_clk_0 rx_clk
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# connections (adc)
projects/- xcvr updates
2016-11-22 21:23:05 +00:00
ad_xcvrcon util_fmcadc2_xcvr axi_ad9625_xcvr axi_ad9625_jesd
ad_connect util_fmcadc2_xcvr/rx_out_clk_0 axi_ad9625_core/rx_clk
ad_connect axi_ad9625_jesd/rx_tdata axi_ad9625_core/rx_data
ad_connect axi_ad9625_jesd/rx_start_of_frame axi_ad9625_core/rx_sof
ad_connect sys_cpu_clk axi_ad9625_fifo/dma_clk
ad_connect sys_cpu_clk axi_ad9625_dma/s_axis_aclk
ad_connect sys_cpu_resetn axi_ad9625_dma/m_dest_axi_aresetn
ad_connect axi_ad9625_core/adc_clk axi_ad9625_fifo/adc_clk
ad_connect axi_ad9625_fifo/adc_rst axi_ad9625_core/adc_rst
ad_connect axi_ad9625_core/adc_enable axi_ad9625_fifo/adc_wr
ad_connect axi_ad9625_core/adc_data axi_ad9625_fifo/adc_wdata
ad_connect axi_ad9625_core/adc_dovf axi_ad9625_fifo/adc_wovf
ad_connect axi_ad9625_fifo/dma_wr axi_ad9625_dma/s_axis_valid
ad_connect axi_ad9625_fifo/dma_wdata axi_ad9625_dma/s_axis_data
ad_connect axi_ad9625_fifo/dma_wready axi_ad9625_dma/s_axis_ready
ad_connect axi_ad9625_fifo/dma_xfer_req axi_ad9625_dma/s_axis_xfer_req
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# interconnect (cpu)
fmcadc2: xcvr updates
2016-11-21 16:45:38 +00:00
ad_cpu_interconnect 0x44A60000 axi_ad9625_xcvr
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_cpu_interconnect 0x44A10000 axi_ad9625_core
ad_cpu_interconnect 0x44A91000 axi_ad9625_jesd
ad_cpu_interconnect 0x7c420000 axi_ad9625_dma
# gt uses hp3, and 100MHz clock for both DRP and AXI4
ad_mem_hp3_interconnect sys_cpu_clk sys_ps7/S_AXI_HP3
fmcadc2: xcvr updates
2016-11-21 16:45:38 +00:00
ad_mem_hp3_interconnect sys_cpu_clk axi_ad9625_xcvr/m_axi
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
# interconnect (mem/adc)
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_cpu_clk axi_ad9625_dma/m_dest_axi
# interrupts
ad_cpu_interrupt ps-13 mb-12 axi_ad9625_dma/irq