pluto_hdl_adi/library/axi_dmac/src_axi_stream.v

136 lines
4.0 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
2018-03-14 14:45:47 +00:00
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module dmac_src_axi_stream #(
parameter ID_WIDTH = 3,
parameter S_AXIS_DATA_WIDTH = 64,
parameter LENGTH_WIDTH = 24,
parameter BEATS_PER_BURST_WIDTH = 4)(
input s_axis_aclk,
input s_axis_aresetn,
input enable,
output enabled,
input [ID_WIDTH-1:0] request_id,
output [ID_WIDTH-1:0] response_id,
input eot,
output rewind_req_valid,
input rewind_req_ready,
output [ID_WIDTH+3-1:0] rewind_req_data,
output bl_valid,
input bl_ready,
output [BEATS_PER_BURST_WIDTH-1:0] measured_last_burst_length,
output block_descr_to_dst,
output [ID_WIDTH-1:0] source_id,
output source_eot,
output s_axis_ready,
input s_axis_valid,
input [S_AXIS_DATA_WIDTH-1:0] s_axis_data,
input [0:0] s_axis_user,
input s_axis_last,
output s_axis_xfer_req,
output fifo_valid,
output [S_AXIS_DATA_WIDTH-1:0] fifo_data,
axi_dmac: Rework data store-and-forward buffer Currently the DMAC uses a simple FIFO as the store-and-forward buffer. The FIFO handshaking is beat based whereas the remainder of the DMAC is burst based. This means that additional control signals have to be combined with the FIFO handshaking signal to generate the external handshaking signals. Re-work the store-and-forward buffer to utilize a BRAM that is subdivided into N segments. Where N is the maximum number of bursts that can be stored in the buffer and each segment has the size of the maximum burst length. Each segment stores the data associated with one burst and even when the burst is shorter than the maximum burst length the next burst will be stored in the next segment. The new store-and-forward buffer takes care of generating all the handshaking signals. This means handshaking is generated in a central place and does not have to be combined from multiple data-paths simplifying the overall logic. The new store-and-forward buffer also takes care of data width up- and down-sizing in case that the source and sink modules have a different data width. This tighter integration will allow future enhancements like using asymmetric memory. This re-work lays the foundation of future enhancements to the DMA like support for un-aligned transfers and early transfer abort which would have been much more difficult to implement with the previous architecture. In addition it significantly reduces the resource utilization of the store-and-forward buffer and allows for better timing due to reduced combinatorial path lengths. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-05-09 16:02:41 +00:00
output fifo_last,
output fifo_partial_burst,
input req_valid,
output req_ready,
input [BEATS_PER_BURST_WIDTH-1:0] req_last_burst_length,
input req_sync_transfer_start,
input req_xlast
);
assign enabled = enable;
dmac_data_mover # (
.ID_WIDTH(ID_WIDTH),
.DATA_WIDTH(S_AXIS_DATA_WIDTH),
.BEATS_PER_BURST_WIDTH(BEATS_PER_BURST_WIDTH),
.ALLOW_ABORT(1)
) i_data_mover (
.clk(s_axis_aclk),
.resetn(s_axis_aresetn),
.xfer_req(s_axis_xfer_req),
.request_id(request_id),
.response_id(response_id),
.eot(eot),
.rewind_req_valid(rewind_req_valid),
.rewind_req_ready(rewind_req_ready),
.rewind_req_data(rewind_req_data),
.bl_valid(bl_valid),
.bl_ready(bl_ready),
.measured_last_burst_length(measured_last_burst_length),
.block_descr_to_dst(block_descr_to_dst),
.source_id(source_id),
.source_eot(source_eot),
.req_valid(req_valid),
.req_ready(req_ready),
.req_last_burst_length(req_last_burst_length),
.req_sync_transfer_start(req_sync_transfer_start),
.req_xlast(req_xlast),
.s_axi_valid(s_axis_valid),
.s_axi_ready(s_axis_ready),
.s_axi_data(s_axis_data),
.s_axi_last(s_axis_last),
.s_axi_sync(s_axis_user[0]),
.m_axi_valid(fifo_valid),
.m_axi_data(fifo_data),
.m_axi_last(fifo_last),
.m_axi_partial_burst(fifo_partial_burst)
);
endmodule