zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/adrv9371x/kcu105/system_bd.tcl

25 lines
856 B
Tcl
Raw Normal View History

adrv9371x_kcu105: Initial commit
2017-08-22 12:41:49 +00:00
set dac_fifo_name axi_ad9371_dacfifo
set dac_fifo_address_width 10
set dac_data_width 128
set dac_dma_data_width 128
source $ad_hdl_dir/projects/common/kcu105/kcu105_system_bd.tcl
source $ad_hdl_dir/projects/common/kcu105/kcu105_system_mig.tcl
source $ad_hdl_dir/projects/common/xilinx/dacfifo_bd.tcl
adrv9371: Increase FCLK2 to 200MHz to support max sampling rates This fixes an issue seen when using 307.2 MSPS on the Observation RX. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2018-01-09 14:20:06 +00:00
ad_ip_parameter axi_ddr_cntrl CONFIG.ADDN_UI_CLKOUT3_FREQ_HZ 200
adrv9371x_kcu105: Initial commit
2017-08-22 12:41:49 +00:00
source ../common/adrv9371x_bd.tcl
ad_connect sys_dma_clk axi_ddr_cntrl/addn_ui_clkout3
ad_connect sys_dma_rstgen/ext_reset_in sys_rstgen/peripheral_reset
adrv9371x: Set correct transceiver type for UltraScale projects Make sure that the axi_adxcvr instances are configured with the same transceiver type as the util_adxcvr. This is necessary for software to be able to detect the transceiver type and support dynamic reconfiguration. It is also necessary for correct eye scan support in the axi_adxcvr block. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-11-10 16:11:46 +00:00
ad_ip_parameter axi_ad9371_tx_xcvr CONFIG.XCVR_TYPE 1
ad_ip_parameter axi_ad9371_rx_xcvr CONFIG.XCVR_TYPE 1
ad_ip_parameter axi_ad9371_rx_os_xcvr CONFIG.XCVR_TYPE 1
adrv9371x_kcu105: Initial commit
2017-08-22 12:41:49 +00:00
ad_ip_parameter util_ad9371_xcvr CONFIG.XCVR_TYPE 1
ad_ip_parameter util_ad9371_xcvr CONFIG.QPLL_FBDIV 20
ad_ip_parameter util_ad9371_xcvr CONFIG.QPLL_REFCLK_DIV 1