pluto_hdl_adi/library/axi_dmac/axi_register_slice.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2013(c) Analog Devices, Inc.
// 
// All rights reserved.
// 
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//    
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************

module axi_register_slice (
	input clk,
	input resetn,

	input s_axi_valid,
	output s_axi_ready,
	input [DATA_WIDTH-1:0] s_axi_data,

	output m_axi_valid,
	input m_axi_ready,
	output [DATA_WIDTH-1:0] m_axi_data
);

parameter DATA_WIDTH = 32;

parameter FORWARD_REGISTERED = 0;
parameter BACKWARD_REGISTERED = 0;

/*
 s_axi_data  -> bwd_data     -> fwd_data(1)  -> m_axi_data
 s_axi_valid -> bwd_valid    -> fwd_valid(1) -> m_axi_valid
 s_axi_ready <- bwd_ready(2) <- fwd_ready <- m_axi_ready

 (1) FORWARD_REGISTERED inserts a set of FF before m_axi_data and m_axi_valid
 (2) BACKWARD_REGISTERED insters a FF before s_axi_ready
*/

wire [DATA_WIDTH-1:0] bwd_data_s;
wire bwd_valid_s;
wire bwd_ready_s;
wire [DATA_WIDTH-1:0] fwd_data_s;
wire fwd_valid_s;
wire fwd_ready_s;

generate if (FORWARD_REGISTERED == 1) begin

reg fwd_valid;
reg [DATA_WIDTH-1:0] fwd_data;

assign fwd_ready_s = ~fwd_valid | m_axi_ready;
assign fwd_valid_s = fwd_valid;
assign fwd_data_s = fwd_data;

always @(posedge clk) begin
	if (resetn == 1'b0) begin
		fwd_valid <= 1'b0;
	end else begin 
		if (~fwd_valid | m_axi_ready)
			fwd_data <= bwd_data_s;
		if (bwd_valid_s)
			fwd_valid <= 1'b1;
		else if (m_axi_ready)
			fwd_valid <= 1'b0;
	end
end

end else begin
assign fwd_data_s = bwd_data_s;
assign fwd_valid_s = bwd_valid_s;
assign fwd_ready_s = m_axi_ready;
end
endgenerate

generate if (BACKWARD_REGISTERED == 1) begin

reg bwd_ready;
reg [DATA_WIDTH-1:0] bwd_data;

assign bwd_valid_s = ~bwd_ready | s_axi_valid;
assign bwd_data_s = bwd_ready ? s_axi_data : bwd_data;
assign bwd_ready_s = bwd_ready;

always @(posedge clk) begin
	if (resetn == 1'b0) begin
		bwd_ready <= 1'b1;
	end else begin
		if (bwd_ready)
			bwd_data <= s_axi_data;
		if (fwd_ready_s)
			bwd_ready <= 1'b1;
		else if (s_axi_valid)
			bwd_ready <= 1'b0;
	end
end

end else begin
assign bwd_valid_s = s_axi_valid;
assign bwd_data_s = s_axi_data;
assign bwd_ready_s = fwd_ready_s;
end endgenerate

assign m_axi_data = fwd_data_s;
assign m_axi_valid = fwd_valid_s;
assign s_axi_ready = bwd_ready_s;

endmodule