pluto_hdl_adi/projects/usrpe31x/system_top.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module system_top (

  inout   [14:0]  ddr_addr,
  inout   [ 2:0]  ddr_ba,
  inout           ddr_cas_n,
  inout           ddr_ck_n,
  inout           ddr_ck_p,
  inout           ddr_cke,
  inout           ddr_cs_n,
  inout   [ 1:0]  ddr_dm,
  inout   [15:0]  ddr_dq,
  inout   [ 1:0]  ddr_dqs_n,
  inout   [ 1:0]  ddr_dqs_p,
  inout           ddr_odt,
  inout           ddr_ras_n,
  inout           ddr_reset_n,
  inout           ddr_we_n,

  inout           fixed_io_ddr_vrn,
  inout           fixed_io_ddr_vrp,
  inout   [31:0]  fixed_io_mio,
  inout           fixed_io_ps_clk,
  inout           fixed_io_ps_porb,
  inout           fixed_io_ps_srstb,

  inout           iic_scl,
  inout           iic_sda,

  inout           gpio_bd,

  input           rx_clk_in,
  input           rx_frame_in,
  input   [11:0]  rx_data_in,
  output          tx_clk_out,
  output          tx_frame_out,
  output  [11:0]  tx_data_out,

  output          enable,
  output          txnrx,
  input           clk_out,

  inout           gpio_resetb,
  inout           gpio_en_agc,
  inout   [ 3:0]  gpio_ctl,
  inout   [ 7:0]  gpio_status,

  output          spi_csn,
  output          spi_clk,
  output          spi_mosi,
  input           spi_miso);

  // internal signals

  wire    [16:0]  gpio_i;
  wire    [16:0]  gpio_o;
  wire    [16:0]  gpio_t;

  // instantiations

  ad_iobuf #(.DATA_WIDTH(15)) i_iobuf (
    .dio_t (gpio_t[14:0]),
    .dio_i (gpio_o[14:0]),
    .dio_o (gpio_i[14:0]),
    .dio_p ({ gpio_bd,            // 14:14
              gpio_resetb,        // 13:13
              gpio_en_agc,        // 12:12
              gpio_ctl,           // 11: 8
              gpio_status}));     //  7: 0

  system_wrapper i_system_wrapper (
    .ddr_addr (ddr_addr),
    .ddr_ba (ddr_ba),
    .ddr_cas_n (ddr_cas_n),
    .ddr_ck_n (ddr_ck_n),
    .ddr_ck_p (ddr_ck_p),
    .ddr_cke (ddr_cke),
    .ddr_cs_n (ddr_cs_n),
    .ddr_dm (ddr_dm),
    .ddr_dq (ddr_dq),
    .ddr_dqs_n (ddr_dqs_n),
    .ddr_dqs_p (ddr_dqs_p),
    .ddr_odt (ddr_odt),
    .ddr_ras_n (ddr_ras_n),
    .ddr_reset_n (ddr_reset_n),
    .ddr_we_n (ddr_we_n),
    .enable (enable),
    .fixed_io_ddr_vrn (fixed_io_ddr_vrn),
    .fixed_io_ddr_vrp (fixed_io_ddr_vrp),
    .fixed_io_mio (fixed_io_mio),
    .fixed_io_ps_clk (fixed_io_ps_clk),
    .fixed_io_ps_porb (fixed_io_ps_porb),
    .fixed_io_ps_srstb (fixed_io_ps_srstb),
    .gpio_i (gpio_i),
    .gpio_o (gpio_o),
    .gpio_t (gpio_t),
    .iic_main_scl_io (iic_scl),
    .iic_main_sda_io (iic_sda),
    .ps_intr_00 (1'b0),
    .ps_intr_01 (1'b0),
    .ps_intr_02 (1'b0),
    .ps_intr_03 (1'b0),
    .ps_intr_04 (1'b0),
    .ps_intr_05 (1'b0),
    .ps_intr_06 (1'b0),
    .ps_intr_07 (1'b0),
    .ps_intr_08 (1'b0),
    .ps_intr_09 (1'b0),
    .ps_intr_10 (1'b0),
    .ps_intr_11 (1'b0),
    .ps_intr_14 (1'b0),
    .rx_clk_in (rx_clk_in),
    .rx_data_in (rx_data_in),
    .rx_frame_in (rx_frame_in),
    .spi0_clk_i (1'b0),
    .spi0_clk_o (spi_clk),
    .spi0_csn_0_o (spi_csn),
    .spi0_csn_1_o (),
    .spi0_csn_2_o (),
    .spi0_csn_i (1'b1),
    .spi0_sdi_i (spi_miso),
    .spi0_sdo_i (1'b0),
    .spi0_sdo_o (spi_mosi),
    .tx_clk_out (tx_clk_out),
    .tx_data_out (tx_data_out),
    .tx_frame_out (tx_frame_out),
    .txnrx (txnrx),
    .up_enable (gpio_o[15]),
    .up_txnrx (gpio_o[16]));

endmodule

// ***************************************************************************
// ***************************************************************************