pluto_hdl_adi/library/common/util_pulse_gen.v

94 lines
3.2 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/1ps
module util_pulse_gen #(
parameter PULSE_WIDTH = 7,
parameter PULSE_PERIOD = 100000000)( // t_period * clk_freq
input clk,
input rstn,
input [31:0] pulse_period,
input pulse_period_en,
output reg pulse
);
// internal registers
reg [(PULSE_WIDTH-1):0] pulse_width_cnt = {PULSE_WIDTH{1'b1}};
reg [31:0] pulse_period_cnt = 32'h0;
reg [31:0] pulse_period_d = 32'b0;
wire end_of_period_s;
// flop the desired period
always @(posedge clk) begin
pulse_period_d <= (pulse_period_en) ? pulse_period : PULSE_PERIOD;
end
// a free running pulse generator
always @(posedge clk) begin
if (rstn == 1'b0) begin
pulse_period_cnt <= 32'h0;
end else begin
pulse_period_cnt <= (pulse_period_cnt < pulse_period_d) ? (pulse_period_cnt + 1) : 32'b0;
end
end
assign end_of_period_s = (pulse_period_cnt == (pulse_period_d - 1)) ? 1'b1 : 1'b0;
// generate pulse with a specified width
always @(posedge clk) begin
if (rstn == 1'b0) begin
pulse_width_cnt <= 0;
pulse <= 0;
end else begin
pulse_width_cnt <= (pulse == 1'b1) ? pulse_width_cnt + 1 : {PULSE_WIDTH{1'h0}};
if(end_of_period_s == 1'b1) begin
pulse <= 1'b1;
end else if(pulse_width_cnt == {PULSE_WIDTH{1'b1}}) begin
pulse <= 1'b0;
end
end
end
endmodule