pluto_hdl_adi/library/axi_adc_trigger/axi_adc_trigger.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory
//      of this repository (LICENSE_GPL2), and also online at:
//      <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license, which can be found in the top level directory
//      of this repository (LICENSE_ADIBSD), and also on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module axi_adc_trigger #(

  // parameters

  parameter SIGN_BITS = 2,
  parameter OUT_PIN_HOLD_N = 100000) (

  // interface

  input                 clk,
  input                 reset,

  input                 trigger_in,

  input       [ 1:0]    trigger_i,
  output reg  [ 1:0]    trigger_o,
  output      [ 1:0]    trigger_t,

  input       [15:0]    data_a,
  input       [15:0]    data_b,
  input                 data_valid_a,
  input                 data_valid_b,

  output reg  [15:0]    data_a_trig,
  output reg  [15:0]    data_b_trig,
  output reg            data_valid_a_trig,
  output reg            data_valid_b_trig,
  output                trigger_out,
  output                trigger_out_la,

  output      [31:0]    fifo_depth,

  // axi interface

  input                 s_axi_aclk,
  input                 s_axi_aresetn,
  input                 s_axi_awvalid,
  input       [ 6:0]    s_axi_awaddr,
  input       [ 2:0]    s_axi_awprot,
  output                s_axi_awready,
  input                 s_axi_wvalid,
  input       [31:0]    s_axi_wdata,
  input       [ 3:0]    s_axi_wstrb,
  output                s_axi_wready,
  output                s_axi_bvalid,
  output      [ 1:0]    s_axi_bresp,
  input                 s_axi_bready,
  input                 s_axi_arvalid,
  input       [ 6:0]    s_axi_araddr,
  input       [ 2:0]    s_axi_arprot,
  output                s_axi_arready,
  output                s_axi_rvalid,
  output      [31:0]    s_axi_rdata,
  output      [ 1:0]    s_axi_rresp,
  input                 s_axi_rready);


  localparam DW = 15 - SIGN_BITS;

  // internal signals

  wire                  up_clk;
  wire                  up_rstn;
  wire         [ 4:0]   up_waddr;
  wire         [31:0]   up_wdata;
  wire                  up_wack;
  wire                  up_wreq;
  wire                  up_rack;
  wire         [31:0]   up_rdata;
  wire                  up_rreq;
  wire         [ 4:0]   up_raddr;

  wire         [ 7:0]   io_selection;

  wire         [ 1:0]   low_level;
  wire         [ 1:0]   high_level;
  wire         [ 1:0]   any_edge;
  wire         [ 1:0]   rise_edge;
  wire         [ 1:0]   fall_edge;

  wire         [15:0]   limit_a;
  wire         [ 1:0]   function_a;
  wire         [31:0]   hysteresis_a;
  wire         [ 3:0]   trigger_l_mix_a;

  wire         [15:0]   limit_b;
  wire         [ 1:0]   function_b;
  wire         [31:0]   hysteresis_b;
  wire         [ 3:0]   trigger_l_mix_b;

  wire         [16:0]   trigger_out_control;
  wire         [31:0]   trigger_delay;

  wire         [31:0]   trigger_holdoff;
  wire         [19:0]   trigger_out_hold_pins;

  wire signed  [DW:0]   data_a_cmp;
  wire signed  [DW:0]   data_b_cmp;
  wire signed  [DW:0]   limit_a_cmp;
  wire signed  [DW:0]   limit_b_cmp;

  wire                  comp_low_a_s; // signal is over the limit
  wire                  comp_low_b_s; // signal is over the limit
  wire                  trigger_a_fall_edge;
  wire                  trigger_a_rise_edge;
  wire                  trigger_b_fall_edge;
  wire                  trigger_b_rise_edge;
  wire                  trigger_a_any_edge;
  wire                  trigger_b_any_edge;
  wire                  trigger_out_delayed;
  wire         [ 1:0]   trigger_up_o_s;
  wire                  trigger_out_holdoff;
  wire                  holdoff_cnt_en;
  wire                  streaming;
  wire                  trigger_out_s;
  wire                  embedded_trigger;
  wire                  external_trigger;

  reg                   trigger_a_d1; // synchronization flip flop
  reg                   trigger_a_d2; // synchronization flip flop
  reg                   trigger_a_d3;
  reg                   trigger_b_d1; // synchronization flip flop
  reg                   trigger_b_d2; // synchronization flip flop
  reg                   trigger_b_d3;
  reg                   comp_high_a;  // signal is over the limit
  reg                   old_comp_high_a;   // t + 1 version of comp_high_a
  reg                   hyst_high_limit_pass_a; // valid hysteresis range on passthrough high trigger limit
  reg                   hyst_low_limit_pass_a; // valid hysteresis range on passthrough low trigger limit
  reg signed [DW:0]     hyst_a_high_limit;
  reg signed [DW:0]     hyst_a_low_limit;
  reg                   comp_high_b;       // signal is over the limit
  reg                   old_comp_high_b;   // t + 1 version of comp_high_b
  reg                   hyst_high_limit_pass_b; // valid hysteresis range on passthrough high trigger limit
  reg                   hyst_low_limit_pass_b; // valid hysteresis range on passthrough low trigger limit
  reg signed [DW:0]     hyst_b_high_limit;
  reg signed [DW:0]     hyst_b_low_limit;
  reg                   passthrough_high_a; // trigger when rising through the limit
  reg                   passthrough_low_a;  // trigger when fallingh thorugh the limit
  reg                   passthrough_high_b; // trigger when rising through the limit
  reg                   passthrough_low_b;  // trigger when fallingh thorugh the limit

  reg                   trigger_pin_a;
  reg                   trigger_pin_b;
  reg        [ 1:0]     trigger_o_m = 1'd0;

  reg                   trig_o_hold_0 = 1'b0;
  reg                   trig_o_hold_1 = 1'b0;
  reg        [19:0]     trig_o_hold_cnt_0 = 20'd0;
  reg        [19:0]     trig_o_hold_cnt_1 = 20'd0;

  reg                   trigger_adc_a;
  reg                   trigger_adc_b;

  reg                   trigger_a;
  reg                   trigger_b;

  reg                   trigger_out_mixed;
  reg                   up_triggered;
  reg                   up_triggered_d1;
  reg                   up_triggered_d2;

  reg                   up_triggered_set;
  reg                   up_triggered_reset;
  reg                   up_triggered_reset_d1;
  reg                   up_triggered_reset_d2;

  reg        [31:0]     trigger_delay_counter = 32'h0;
  reg        [31:0]     trigger_holdoff_counter = 32'h0;
  reg                   triggered;
  reg                   trigger_out_m1;
  reg                   trigger_out_m2;

  reg                   streaming_on;
  reg                   trigger_out_hold;
  reg                   trigger_out_ack;


  // signal name changes

  assign up_clk = s_axi_aclk;
  assign up_rstn = s_axi_aresetn;

  assign trigger_t = io_selection[1:0];

  assign trigger_a_fall_edge = (trigger_a_d2 == 1'b0 && trigger_a_d3 == 1'b1) ? 1'b1: 1'b0;
  assign trigger_a_rise_edge = (trigger_a_d2 == 1'b1 && trigger_a_d3 == 1'b0) ? 1'b1: 1'b0;
  assign trigger_a_any_edge = trigger_a_rise_edge | trigger_a_fall_edge;
  assign trigger_b_fall_edge = (trigger_b_d2 == 1'b0 && trigger_b_d3 == 1'b1) ? 1'b1: 1'b0;
  assign trigger_b_rise_edge = (trigger_b_d2 == 1'b1 && trigger_b_d3 == 1'b0) ? 1'b1: 1'b0;
  assign trigger_b_any_edge = trigger_b_rise_edge | trigger_b_fall_edge;

  assign data_a_cmp   = data_a[DW:0];
  assign data_b_cmp   = data_b[DW:0];
  assign limit_a_cmp  = limit_a[DW:0];
  assign limit_b_cmp  = limit_b[DW:0];

  always @(*) begin
    case(io_selection[4:2])
      3'h0: trigger_o_m[0] = trigger_up_o_s[0];
      3'h1: trigger_o_m[0] = trigger_i[0];
      3'h2: trigger_o_m[0] = trigger_i[1];
      3'h3: trigger_o_m[0] = trigger_out_mixed;
      3'h4: trigger_o_m[0] = trigger_in;
      default: trigger_o_m[0] = trigger_up_o_s[0];
    endcase
    case(io_selection[7:5])
      3'h0: trigger_o_m[1] = trigger_up_o_s[1];
      3'h1: trigger_o_m[1] = trigger_i[1];
      3'h2: trigger_o_m[1] = trigger_i[0];
      3'h3: trigger_o_m[1] = trigger_out_mixed;
      3'h4: trigger_o_m[1] = trigger_in;
      default: trigger_o_m[1] = trigger_up_o_s[1];
    endcase
  end

  // External trigger output hold 100000 clock cycles(1ms) on polarity change.
  // All trigger signals that are to be outputted on the external trigger after a
  // trigger out is acknowledged by the hold counter will be disregarded for 1ms.
  // This was done to avoid noise created by high frequency switches on long
  // wires.

  always @(posedge clk) begin
    // trigger_o[0] hold start
    if (trig_o_hold_cnt_0 != 20'd0) begin
      trig_o_hold_cnt_0 <= trig_o_hold_cnt_0 - 20'd1;
    end else if (trig_o_hold_0 != trigger_o_m[0]) begin
      trig_o_hold_cnt_0 <= trigger_out_hold_pins;
      trig_o_hold_0 <= trigger_o_m[0];
    end

    // trigger_o[1] hold start
    if (trig_o_hold_cnt_1 != 20'd0) begin
      trig_o_hold_cnt_1 <= trig_o_hold_cnt_1 - 20'd1;
    end else if (trig_o_hold_1 != trigger_o_m[1]) begin
      trig_o_hold_cnt_1 <= trigger_out_hold_pins;
      trig_o_hold_1 <= trigger_o_m[1];
    end

    // hold
    trigger_o[0] <= (trig_o_hold_cnt_0 == 'd0) ? trigger_o_m[0] : trig_o_hold_0;
    trigger_o[1] <= (trig_o_hold_cnt_1 == 'd0) ? trigger_o_m[1] : trig_o_hold_1;
  end


  // 1. keep data in sync with the trigger. The trigger bypasses the variable
  // fifo. The data goes through and it is delayed with 4 clock cycles)
  // 2. For non max sample rate of the ADC, the trigger signal that originates
  // from an external source is stored until the valid acknowledges the trigger.
  always @(posedge clk) begin
    if (reset == 1'b1) begin
      trigger_out_m1 <= 1'b0;
      trigger_out_m2 <= 1'b0;
      trigger_out_ack <= 1'b0;
      trigger_out_hold <= 1'b0;
    end else begin
      if (data_out_valid == 1'b1) begin
        trigger_out_m1 <= trigger_out_s | trigger_out_hold;
        trigger_out_m2 <= trigger_out_m1;
        trigger_out_ack <= trigger_out_hold;
      end
      if (~trigger_out_m1 & trigger_out_s & ~data_out_valid) begin
        trigger_out_hold <= 1'b1;
      end
      if (trigger_out_ack) begin
        trigger_out_hold <= 1'b0;
      end
    end
  end

  assign data_out_valid = data_valid_a | data_valid_b;

  assign trigger_out_la = trigger_out_mixed;
  assign trigger_out = trigger_out_m2;

  always @(posedge clk) begin
    if (data_out_valid) begin
      data_a_trig <= (embedded_trigger == 1'h0) ? {data_a[14],data_a[14:0]} : {trigger_out_s,data_a[14:0]};
      data_b_trig <= (embedded_trigger == 1'h0) ? {data_b[14],data_b[14:0]} : {trigger_out_s,data_b[14:0]};
    end

    data_valid_a_trig <= data_valid_a;
    data_valid_b_trig <= data_valid_b;
  end

  assign embedded_trigger = trigger_out_control[16];
  assign trigger_out_s = (trigger_delay == 32'h0) ? (trigger_out_holdoff | streaming_on) :
                                                    (trigger_out_delayed | streaming_on);

  assign trigger_out_delayed = (trigger_delay_counter == 32'h0) ? 1 : 0;

  // delay out trigger
  always @(posedge clk) begin
    if (trigger_delay == 0) begin
      trigger_delay_counter <= 32'h0;
    end else begin
      if (data_valid_a == 1'b1) begin
        triggered <= trigger_out_holdoff | triggered;
        if (trigger_delay_counter == 0) begin
          trigger_delay_counter <= trigger_delay;
          triggered <= 1'b0;
        end else begin
          if(triggered == 1'b1 || trigger_out_holdoff == 1'b1) begin
            trigger_delay_counter <= trigger_delay_counter - 1;
          end
        end
      end
    end
  end


  always @(posedge clk) begin
    if (trigger_delay == 0) begin
      if (streaming == 1'b1 && data_valid_a == 1'b1 && trigger_out_holdoff == 1'b1) begin
        streaming_on <= 1'b1;
      end else if (streaming == 1'b0) begin
        streaming_on <= 1'b0;
      end
    end else begin
      if (streaming == 1'b1 && data_valid_a == 1'b1 && trigger_out_delayed == 1'b1) begin
        streaming_on <= 1'b1;
      end else if (streaming == 1'b0) begin
        streaming_on <= 1'b0;
      end
    end
  end

  // hold off trigger
  assign trigger_out_holdoff = (trigger_holdoff_counter != 0) ? 0 : trigger_out_mixed;

  always @(posedge clk) begin
    if (reset == 1'b1) begin
      trigger_holdoff_counter <= 0;
    end else begin
      if (trigger_holdoff_counter != 0) begin
        trigger_holdoff_counter <= trigger_holdoff_counter - 1'b1;
      end else if (trigger_out_holdoff == 1'b1) begin
        trigger_holdoff_counter <= trigger_holdoff;
      end else begin
        trigger_holdoff_counter <= trigger_holdoff_counter;
      end
    end
  end

  always @(posedge clk) begin
    if (data_valid_a == 1'b1 && trigger_out_holdoff == 1'b1) begin
      up_triggered_set <= 1'b1;
    end else if (up_triggered_reset == 1'b1) begin
      up_triggered_set <= 1'b0;
    end
    up_triggered_reset_d1 <= up_triggered;
    up_triggered_reset_d2 <= up_triggered_reset_d1;
    up_triggered_reset    <= up_triggered_reset_d2;
  end

  always @(posedge up_clk) begin
    up_triggered_d1 <= up_triggered_set;
    up_triggered_d2 <= up_triggered_d1;
    up_triggered    <= up_triggered_d2;
  end

  always @(*) begin
    case(trigger_l_mix_a)
      4'h0: trigger_a = 1'b1;
      4'h1: trigger_a = trigger_pin_a;
      4'h2: trigger_a = trigger_adc_a;
      4'h4: trigger_a = trigger_pin_a | trigger_adc_a ;
      4'h5: trigger_a = trigger_pin_a & trigger_adc_a ;
      4'h6: trigger_a = trigger_pin_a ^ trigger_adc_a ;
      4'h7: trigger_a = !(trigger_pin_a | trigger_adc_a) ;
      4'h8: trigger_a = !(trigger_pin_a & trigger_adc_a) ;
      4'h9: trigger_a = !(trigger_pin_a ^ trigger_adc_a) ;
      default: trigger_a = 1'b1;
    endcase
  end

  always @(*) begin
    case(trigger_l_mix_b)
      4'h0: trigger_b = 1'b1;
      4'h1: trigger_b = trigger_pin_b;
      4'h2: trigger_b = trigger_adc_b;
      4'h4: trigger_b = trigger_pin_b | trigger_adc_b ;
      4'h5: trigger_b = trigger_pin_b & trigger_adc_b ;
      4'h6: trigger_b = trigger_pin_b ^ trigger_adc_b ;
      4'h7: trigger_b = !(trigger_pin_b | trigger_adc_b) ;
      4'h8: trigger_b = !(trigger_pin_b & trigger_adc_b) ;
      4'h9: trigger_b = !(trigger_pin_b ^ trigger_adc_b) ;
      default: trigger_b = 1'b1;
    endcase
  end

  always @(*) begin
    case(function_a)
      2'h0: trigger_adc_a = comp_low_a_s;
      2'h1: trigger_adc_a = comp_high_a;
      2'h2: trigger_adc_a = passthrough_high_a;
      2'h3: trigger_adc_a = passthrough_low_a;
      default: trigger_adc_a = comp_low_a_s;
    endcase
  end

  always @(*) begin
    case(function_b)
      2'h0: trigger_adc_b = comp_low_b_s;
      2'h1: trigger_adc_b = comp_high_b;
      2'h2: trigger_adc_b = passthrough_high_b;
      2'h3: trigger_adc_b = passthrough_low_b;
      default: trigger_adc_b = comp_low_b_s;
    endcase
  end

  always @(posedge clk) begin
    trigger_a_d1 <= trigger_i[0];
    trigger_a_d2 <= trigger_a_d1;
    trigger_a_d3 <= trigger_a_d2;
    trigger_b_d1 <= trigger_i[1];
    trigger_b_d2 <= trigger_b_d1;
    trigger_b_d3 <= trigger_b_d2;
  end

  always @(*) begin
    trigger_pin_a = ((!trigger_a_d3 & low_level[0]) |
      (trigger_a_d3 & high_level[0]) |
      (trigger_a_fall_edge & fall_edge[0]) |
      (trigger_a_rise_edge & rise_edge[0]) |
      (trigger_a_any_edge & any_edge[0]));
  end

  always @(*) begin
    trigger_pin_b = ((!trigger_b_d3 & low_level[1]) |
      (trigger_b_d3 & high_level[1]) |
      (trigger_b_fall_edge & fall_edge[1]) |
      (trigger_b_rise_edge & rise_edge[1]) |
      (trigger_b_any_edge & any_edge[1]));
  end

   always @(*) begin
    case(trigger_out_control[3:0])
      4'h0: trigger_out_mixed = trigger_a;
      4'h1: trigger_out_mixed = trigger_b;
      4'h2: trigger_out_mixed = trigger_a | trigger_b;
      4'h3: trigger_out_mixed = trigger_a & trigger_b;
      4'h4: trigger_out_mixed = trigger_a ^ trigger_b;
      4'h5: trigger_out_mixed = trigger_in;
      4'h6: trigger_out_mixed = trigger_a | trigger_in;
      4'h7: trigger_out_mixed = trigger_b | trigger_in;
      4'h8: trigger_out_mixed = trigger_a | trigger_b | trigger_in;
      4'hf: trigger_out_mixed = 1'b0; // trigger disable
      default: trigger_out_mixed = 1'b0;
    endcase
  end

  always @(posedge clk) begin
    if (reset == 1'b1) begin
      comp_high_a <= 1'b0;
      old_comp_high_a <= 1'b0;
      passthrough_high_a <= 1'b0;
      passthrough_low_a <= 1'b0;
      hyst_a_high_limit <= {DW{1'b0}};
      hyst_a_low_limit  <= {DW{1'b0}};
      hyst_high_limit_pass_a <= 1'b0;
      hyst_low_limit_pass_a <= 1'b0;
    end else begin
      if (data_valid_a == 1'b1) begin
        hyst_a_high_limit <= limit_a_cmp + hysteresis_a[DW:0];
        hyst_a_low_limit  <= limit_a_cmp - hysteresis_a[DW:0];

        if (data_a_cmp >= limit_a_cmp) begin
          comp_high_a <= 1'b1;
        end else begin
          comp_high_a <= 1'b0;
        end

        if (data_a_cmp > hyst_a_high_limit) begin
          hyst_low_limit_pass_a <= 1'b1;
        end else begin
          hyst_low_limit_pass_a <= (passthrough_low_a) ? 1'b0 : hyst_low_limit_pass_a;
        end
        if (data_a_cmp < hyst_a_low_limit) begin
          hyst_high_limit_pass_a <= 1'b1;
        end else begin
          hyst_high_limit_pass_a <= passthrough_high_a ? 1'b0 : hyst_high_limit_pass_a;
        end

        old_comp_high_a <= comp_high_a;
        passthrough_high_a <= !old_comp_high_a & comp_high_a & hyst_high_limit_pass_a;
        passthrough_low_a <= old_comp_high_a & !comp_high_a & hyst_low_limit_pass_a;
      end
    end
  end

  assign comp_low_a_s = !comp_high_a;

  always @(posedge clk) begin
    if (reset == 1'b1) begin
      comp_high_b <= 1'b0;
      old_comp_high_b <= 1'b0;
      passthrough_high_b <= 1'b0;
      passthrough_low_b <= 1'b0;
      hyst_b_high_limit <= {DW{1'b0}};
      hyst_b_low_limit  <= {DW{1'b0}};
      hyst_high_limit_pass_b <= 1'b0;
      hyst_low_limit_pass_b <= 1'b0;
    end else begin
      if (data_valid_b == 1'b1) begin
        hyst_b_high_limit <= limit_b_cmp + hysteresis_b[DW:0];
        hyst_b_low_limit  <= limit_b_cmp - hysteresis_b[DW:0];

        if (data_b_cmp >= limit_b_cmp) begin
          comp_high_b <= 1'b1;
        end else begin
          comp_high_b <= 1'b0;
        end

        if (data_b_cmp > hyst_b_high_limit) begin
          hyst_low_limit_pass_b <= 1'b1;
        end else begin
          hyst_low_limit_pass_b <= (passthrough_low_b) ? 1'b0 : hyst_low_limit_pass_b;
        end
        if (data_b_cmp < hyst_b_low_limit) begin
          hyst_high_limit_pass_b <= 1'b1;
        end else begin
          hyst_high_limit_pass_b <= passthrough_high_b ? 1'b0 : hyst_high_limit_pass_b;
        end

        old_comp_high_b <= comp_high_b;
        passthrough_high_b <= !old_comp_high_b & comp_high_b & hyst_high_limit_pass_b;
        passthrough_low_b <= old_comp_high_b & !comp_high_b & hyst_low_limit_pass_b;
      end
    end
  end

  assign comp_low_b_s = !comp_high_b;

  axi_adc_trigger_reg adc_trigger_registers (

  .clk(clk),

  .io_selection(io_selection),
  .trigger_o(trigger_up_o_s),
  .triggered(up_triggered),

  .low_level(low_level),
  .high_level(high_level),
  .any_edge(any_edge),
  .rise_edge(rise_edge),
  .fall_edge(fall_edge),

  .limit_a(limit_a),
  .function_a(function_a),
  .hysteresis_a(hysteresis_a),
  .trigger_l_mix_a(trigger_l_mix_a),

  .limit_b(limit_b),
  .function_b(function_b),
  .hysteresis_b(hysteresis_b),
  .trigger_l_mix_b(trigger_l_mix_b),

  .trigger_out_control(trigger_out_control),
  .trigger_delay(trigger_delay),
  .trigger_holdoff (trigger_holdoff),
  .trigger_out_hold_pins (trigger_out_hold_pins),

  .fifo_depth(fifo_depth),

  .streaming(streaming),

  // bus interface

  .up_rstn(up_rstn),
  .up_clk(up_clk),
  .up_wreq(up_wreq),
  .up_waddr(up_waddr),
  .up_wdata(up_wdata),
  .up_wack(up_wack),
  .up_rreq(up_rreq),
  .up_raddr(up_raddr),
  .up_rdata(up_rdata),
  .up_rack(up_rack));

 up_axi #(
    .AXI_ADDRESS_WIDTH(7)
 ) i_up_axi (
    .up_rstn (up_rstn),
    .up_clk (up_clk),
    .up_axi_awvalid (s_axi_awvalid),
    .up_axi_awaddr (s_axi_awaddr),
    .up_axi_awready (s_axi_awready),
    .up_axi_wvalid (s_axi_wvalid),
    .up_axi_wdata (s_axi_wdata),
    .up_axi_wstrb (s_axi_wstrb),
    .up_axi_wready (s_axi_wready),
    .up_axi_bvalid (s_axi_bvalid),
    .up_axi_bresp (s_axi_bresp),
    .up_axi_bready (s_axi_bready),
    .up_axi_arvalid (s_axi_arvalid),
    .up_axi_araddr (s_axi_araddr),
    .up_axi_arready (s_axi_arready),
    .up_axi_rvalid (s_axi_rvalid),
    .up_axi_rresp (s_axi_rresp),
    .up_axi_rdata (s_axi_rdata),
    .up_axi_rready (s_axi_rready),
    .up_wreq (up_wreq),
    .up_waddr (up_waddr),
    .up_wdata (up_wdata),
    .up_wack (up_wack),
    .up_rreq (up_rreq),
    .up_raddr (up_raddr),
    .up_rdata (up_rdata),
    .up_rack (up_rack));

endmodule

// ***************************************************************************
// ***************************************************************************