pluto_hdl_adi/projects/fmcjesdadc1/common/fmcjesdadc1_bd.tcl

129 lines
6.7 KiB
Tcl
Raw Normal View History

# adc peripherals
set axi_ad9250_xcvr [create_bd_cell -type ip -vlnv analog.com:user:axi_adxcvr:1.0 axi_ad9250_xcvr]
set_property -dict [list CONFIG.NUM_OF_LANES {4}] $axi_ad9250_xcvr
set_property -dict [list CONFIG.QPLL_ENABLE {0}] $axi_ad9250_xcvr
set_property -dict [list CONFIG.TX_OR_RX_N {0}] $axi_ad9250_xcvr
set axi_ad9250_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:7.0 axi_ad9250_jesd]
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {0}] $axi_ad9250_jesd
set_property -dict [list CONFIG.C_LANES {4}] $axi_ad9250_jesd
set data_bsplit [create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 data_bsplit]
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {64} ] $data_bsplit
set_property -dict [list CONFIG.NUM_OF_CHANNELS {2}] $data_bsplit
set axi_ad9250_0_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9250:1.0 axi_ad9250_0_core]
set axi_ad9250_1_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9250:1.0 axi_ad9250_1_core]
set axi_ad9250_0_cpack [create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 axi_ad9250_0_cpack]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {2}] $axi_ad9250_0_cpack
set axi_ad9250_1_cpack [create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 axi_ad9250_1_cpack]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {2}] $axi_ad9250_1_cpack
set axi_ad9250_0_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9250_0_dma]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.ID {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {1}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_LENGTH_WIDTH {24}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9250_0_dma
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CYCLIC {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_ad9250_0_dma
set axi_ad9250_1_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9250_1_dma]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.ID {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {1}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_LENGTH_WIDTH {24}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9250_1_dma
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CYCLIC {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_ad9250_1_dma
# transceiver core
set util_fmcjesdadc1_xcvr [create_bd_cell -type ip -vlnv analog.com:user:util_adxcvr:1.0 util_fmcjesdadc1_xcvr]
set_property -dict [list CONFIG.RX_NUM_OF_LANES {4}] $util_fmcjesdadc1_xcvr
set_property -dict [list CONFIG.TX_NUM_OF_LANES {0}] $util_fmcjesdadc1_xcvr
ad_connect sys_cpu_resetn util_fmcjesdadc1_xcvr/up_rstn
ad_connect sys_cpu_clk util_fmcjesdadc1_xcvr/up_clk
# connections (adc)
ad_xcvrcon util_fmcjesdadc1_xcvr axi_ad9250_xcvr axi_ad9250_jesd
ad_connect util_fmcjesdadc1_xcvr/rx_out_clk_0 axi_ad9250_0_core/rx_clk
ad_connect axi_ad9250_jesd/rx_start_of_frame axi_ad9250_0_core/rx_sof
ad_connect util_fmcjesdadc1_xcvr/rx_out_clk_0 axi_ad9250_1_core/rx_clk
ad_connect axi_ad9250_jesd/rx_start_of_frame axi_ad9250_1_core/rx_sof
ad_connect axi_ad9250_jesd/rx_tdata data_bsplit/data
ad_connect axi_ad9250_0_core/rx_data data_bsplit/split_data_0
ad_connect axi_ad9250_1_core/rx_data data_bsplit/split_data_1
ad_connect util_fmcjesdadc1_xcvr/rx_out_clk_0 axi_ad9250_0_cpack/adc_clk
ad_connect util_fmcjesdadc1_xcvr/rx_out_clk_0 axi_ad9250_1_cpack/adc_clk
ad_connect axi_ad9250_jesd_rstgen/peripheral_reset axi_ad9250_0_cpack/adc_rst
ad_connect axi_ad9250_jesd_rstgen/peripheral_reset axi_ad9250_1_cpack/adc_rst
ad_connect axi_ad9250_0_core/adc_enable_a axi_ad9250_0_cpack/adc_enable_0
ad_connect axi_ad9250_0_core/adc_valid_a axi_ad9250_0_cpack/adc_valid_0
ad_connect axi_ad9250_0_core/adc_data_a axi_ad9250_0_cpack/adc_data_0
ad_connect axi_ad9250_0_core/adc_enable_b axi_ad9250_0_cpack/adc_enable_1
ad_connect axi_ad9250_0_core/adc_valid_b axi_ad9250_0_cpack/adc_valid_1
ad_connect axi_ad9250_0_core/adc_data_b axi_ad9250_0_cpack/adc_data_1
ad_connect axi_ad9250_1_core/adc_enable_a axi_ad9250_1_cpack/adc_enable_0
ad_connect axi_ad9250_1_core/adc_valid_a axi_ad9250_1_cpack/adc_valid_0
ad_connect axi_ad9250_1_core/adc_data_a axi_ad9250_1_cpack/adc_data_0
ad_connect axi_ad9250_1_core/adc_enable_b axi_ad9250_1_cpack/adc_enable_1
ad_connect axi_ad9250_1_core/adc_valid_b axi_ad9250_1_cpack/adc_valid_1
ad_connect axi_ad9250_1_core/adc_data_b axi_ad9250_1_cpack/adc_data_1
ad_connect axi_ad9250_0_core/adc_clk axi_ad9250_0_dma/fifo_wr_clk
ad_connect axi_ad9250_0_dma/fifo_wr_en axi_ad9250_0_cpack/adc_valid
ad_connect axi_ad9250_0_dma/fifo_wr_sync axi_ad9250_0_cpack/adc_sync
ad_connect axi_ad9250_0_dma/fifo_wr_din axi_ad9250_0_cpack/adc_data
ad_connect axi_ad9250_0_core/adc_dovf axi_ad9250_0_dma/fifo_wr_overflow
ad_connect axi_ad9250_1_core/adc_clk axi_ad9250_1_dma/fifo_wr_clk
ad_connect axi_ad9250_1_dma/fifo_wr_en axi_ad9250_1_cpack/adc_valid
ad_connect axi_ad9250_1_dma/fifo_wr_sync axi_ad9250_1_cpack/adc_sync
ad_connect axi_ad9250_1_dma/fifo_wr_din axi_ad9250_1_cpack/adc_data
ad_connect axi_ad9250_1_core/adc_dovf axi_ad9250_1_dma/fifo_wr_overflow
# interconnect (cpu)
ad_cpu_interconnect 0x44A60000 axi_ad9250_xcvr
ad_cpu_interconnect 0x44A10000 axi_ad9250_0_core
ad_cpu_interconnect 0x44A20000 axi_ad9250_1_core
ad_cpu_interconnect 0x44A91000 axi_ad9250_jesd
ad_cpu_interconnect 0x7c420000 axi_ad9250_0_dma
ad_cpu_interconnect 0x7c430000 axi_ad9250_1_dma
# xcvr uses hp3, and 100MHz clock for both DRP and AXI4
ad_mem_hp3_interconnect sys_cpu_clk sys_ps7/S_AXI_HP3
ad_mem_hp3_interconnect sys_cpu_clk axi_ad9250_xcvr/m_axi
# interconnect (adc)
ad_mem_hp2_interconnect sys_200m_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_200m_clk axi_ad9250_0_dma/m_dest_axi
ad_mem_hp2_interconnect sys_200m_clk axi_ad9250_1_dma/m_dest_axi
ad_connect sys_cpu_resetn axi_ad9250_0_dma/m_dest_axi_aresetn
ad_connect sys_cpu_resetn axi_ad9250_1_dma/m_dest_axi_aresetn
#interrupts
ad_cpu_interrupt ps-13 mb-13 axi_ad9250_0_dma/irq
ad_cpu_interrupt ps-12 mb-12 axi_ad9250_1_dma/irq