pluto_hdl_adi/projects/fmcomms2_pr/common/prcfg_system_top.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2013(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/1ns

module prcfg_system_top (
  clk,

  // gpio
  dac_gpio_input,
  dac_gpio_output,
  adc_gpio_input,
  adc_gpio_output,

  // TX side
  dma_dac_en,
  dma_dac_dunf,
  dma_dac_ddata,
  dma_dac_dvalid,

  core_dac_en,
  core_dac_dunf,
  core_dac_ddata,
  core_dac_dvalid,

  // RX side
  core_adc_dwr,
  core_adc_dsync,
  core_adc_ddata,
  core_adc_ovf,

  dma_adc_dwr,
  dma_adc_dsync,
  dma_adc_ddata,
  dma_adc_ovf
);

  input                             clk;

  input   [31:0]                    adc_gpio_input;
  output  [31:0]                    adc_gpio_output;
  input   [31:0]                    dac_gpio_input;
  output  [31:0]                    dac_gpio_output;

  output                            dma_dac_en;
  input                             dma_dac_dunf;
  input   [63:0]                    dma_dac_ddata;
  input                             dma_dac_dvalid;

  input                             core_dac_en;
  output                            core_dac_dunf;
  output  [63:0]                    core_dac_ddata;
  output                            core_dac_dvalid;

  input                             core_adc_dwr;
  input                             core_adc_dsync;
  input   [63:0]                    core_adc_ddata;
  output                            core_adc_ovf;

  output                            dma_adc_dwr;
  output                            dma_adc_dsync;
  output  [63:0]                    dma_adc_ddata;
  input                             dma_adc_ovf;


  localparam NUM_CHANNEL  = 2;
  localparam ENABLE       = 1;
  localparam DISABLE      = 0;

  // setup values for PR fmcomms2
  // number of channels : 2
  // ADC                : enabled
  // DAC                : enabled

  prcfg_top #(
    .NUM_CHANNEL(NUM_CHANNEL),
    .ADC_EN(ENABLE),
    .DAC_EN(ENABLE)
  )i_prcfg_top (
    .clk(clk),
    .adc_gpio_input(adc_gpio_input),
    .adc_gpio_output(adc_gpio_output),
    .dac_gpio_input(dac_gpio_input),
    .dac_gpio_output(dac_gpio_output),
    .dma_dac_en(dma_dac_en),
    .dma_dac_dunf(dma_dac_dunf),
    .dma_dac_ddata(dma_dac_ddata),
    .dma_dac_dvalid(dma_dac_dvalid),
    .core_dac_en(core_dac_en),
    .core_dac_dunf(core_dac_dunf),
    .core_dac_ddata(core_dac_ddata),
    .core_dac_dvalid(core_dac_dvalid),
    .core_adc_dwr(core_adc_dwr),
    .core_adc_dsync(core_adc_dsync),
    .core_adc_ddata(core_adc_ddata),
    .core_adc_ovf(core_adc_ovf),
    .dma_adc_dwr(dma_adc_dwr),
    .dma_adc_dsync(dma_adc_dsync),
    .dma_adc_ddata(dma_adc_ddata),
    .dma_adc_ovf(dma_adc_ovf));

endmodule