pluto_hdl_adi/docs/regmap/adi_regmap_gpreg.txt

135 lines
2.8 KiB
Plaintext
Raw Normal View History

TITLE
General Purpose Registers (axi_gpreg)
AXI_GPREG
ENDTITLE
############################################################################################
############################################################################################
REG
0x0100
REG_IO_ENB
IO control register
ENDREG
FIELD
[31:0] 0x00000000
IO_ENB
RW
IO control register (use as tri-state control, logic depends on the buffer type).
ENDFIELD
############################################################################################
############################################################################################
REG
0x0101
REG_IO_OUT
IO output register
ENDREG
FIELD
[31:0] 0x00000000
IO_ENB
RW
IO output register.
ENDFIELD
############################################################################################
############################################################################################
REG
0x0102
REG_IO_IN
IO input register
ENDREG
FIELD
[31:0] 0x00000000
IO_IN
RO
IO input register.
ENDFIELD
############################################################################################
############################################################################################
REG
0x0110
REG_*
Channel 1, similar to register 0x100 to 0x10f.
ENDREG
REG
0x0120
REG_*
Channel 2, similar to register 0x100 to 0x10f.
ENDREG
REG
0x01f0
REG_*
Channel 15, similar to register 0x100 to 0x10f.
ENDREG
############################################################################################
############################################################################################
REG
0x0200
REG_CM_RESET
Reset register
ENDREG
FIELD
[0] 0x0
CM_RESET_N
RW
Reset register (write a 0x01 to bring core out of reset).
ENDFIELD
############################################################################################
############################################################################################
REG
0x0202
REG_CM_COUNT
Clock count register
ENDREG
FIELD
[31:0] 0x00000000
CM_CLK_COUNT
RO
Interface clock frequency. This is relative to the processor clock and in many cases is
100MHz. The number is represented as unsigned 16.16 format. Assuming a 100MHz processor
clock the minimum is 1.523kHz and maximum is 6.554THz.
ENDFIELD
############################################################################################
############################################################################################
REG
0x0210
REG_*
Channel 1, similar to register 0x200 to 0x20f.
ENDREG
REG
0x0220
REG_*
Channel 2, similar to register 0x200 to 0x20f.
ENDREG
REG
0x02f0
REG_*
Channel 15, similar to register 0x200 to 0x20f.
ENDREG
############################################################################################
############################################################################################