pluto_hdl_adi/library/common/ad_tdd_control.v

828 lines
23 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
2018-03-14 14:45:47 +00:00
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/1ps
module ad_tdd_control#(
parameter integer TX_DATA_PATH_DELAY = 0,
parameter integer CONTROL_PATH_DELAY = 0) (
// clock and reset
input clk,
input rst,
// TDD timming signals
input tdd_enable,
input tdd_secondary,
input tdd_tx_only,
input tdd_rx_only,
input [ 7:0] tdd_burst_count,
input [23:0] tdd_counter_init,
input [23:0] tdd_frame_length,
input [23:0] tdd_vco_rx_on_1,
input [23:0] tdd_vco_rx_off_1,
input [23:0] tdd_vco_tx_on_1,
input [23:0] tdd_vco_tx_off_1,
input [23:0] tdd_rx_on_1,
input [23:0] tdd_rx_off_1,
input [23:0] tdd_rx_dp_on_1,
input [23:0] tdd_rx_dp_off_1,
input [23:0] tdd_tx_on_1,
input [23:0] tdd_tx_off_1,
input [23:0] tdd_tx_dp_on_1,
input [23:0] tdd_tx_dp_off_1,
input [23:0] tdd_vco_rx_on_2,
input [23:0] tdd_vco_rx_off_2,
input [23:0] tdd_vco_tx_on_2,
input [23:0] tdd_vco_tx_off_2,
input [23:0] tdd_rx_on_2,
input [23:0] tdd_rx_off_2,
input [23:0] tdd_rx_dp_on_2,
input [23:0] tdd_rx_dp_off_2,
input [23:0] tdd_tx_on_2,
input [23:0] tdd_tx_off_2,
input [23:0] tdd_tx_dp_on_2,
input [23:0] tdd_tx_dp_off_2,
input tdd_sync,
// TDD control signals
output reg tdd_tx_dp_en,
output reg tdd_rx_dp_en,
output reg tdd_rx_vco_en,
output reg tdd_tx_vco_en,
output reg tdd_rx_rf_en,
output reg tdd_tx_rf_en,
output [23:0] tdd_counter_status);
localparam ON = 1;
localparam OFF = 0;
// tdd control related
// tdd counter related
reg [23:0] tdd_counter = 24'h0;
reg [ 5:0] tdd_burst_counter = 6'h0;
reg tdd_cstate = OFF;
reg tdd_cstate_next = OFF;
reg counter_at_tdd_vco_rx_on_1 = 1'b0;
reg counter_at_tdd_vco_rx_off_1 = 1'b0;
reg counter_at_tdd_vco_tx_on_1 = 1'b0;
reg counter_at_tdd_vco_tx_off_1 = 1'b0;
reg counter_at_tdd_rx_on_1 = 1'b0;
reg counter_at_tdd_rx_off_1 = 1'b0;
reg counter_at_tdd_rx_dp_on_1 = 1'b0;
reg counter_at_tdd_rx_dp_off_1 = 1'b0;
reg counter_at_tdd_tx_on_1 = 1'b0;
reg counter_at_tdd_tx_off_1 = 1'b0;
reg counter_at_tdd_tx_dp_on_1 = 1'b0;
reg counter_at_tdd_tx_dp_off_1 = 1'b0;
reg counter_at_tdd_vco_rx_on_2 = 1'b0;
reg counter_at_tdd_vco_rx_off_2 = 1'b0;
reg counter_at_tdd_vco_tx_on_2 = 1'b0;
reg counter_at_tdd_vco_tx_off_2 = 1'b0;
reg counter_at_tdd_rx_on_2 = 1'b0;
reg counter_at_tdd_rx_off_2 = 1'b0;
reg counter_at_tdd_rx_dp_on_2 = 1'b0;
reg counter_at_tdd_rx_dp_off_2 = 1'b0;
reg counter_at_tdd_tx_on_2 = 1'b0;
reg counter_at_tdd_tx_off_2 = 1'b0;
reg counter_at_tdd_tx_dp_on_2 = 1'b0;
reg counter_at_tdd_tx_dp_off_2 = 1'b0;
reg tdd_last_burst = 1'b0;
reg tdd_sync_d1 = 1'b0;
reg tdd_sync_d2 = 1'b0;
reg tdd_sync_d3 = 1'b0;
// internal signals
wire [23:0] tdd_vco_rx_on_1_s;
wire [23:0] tdd_vco_rx_off_1_s;
wire [23:0] tdd_vco_tx_on_1_s;
wire [23:0] tdd_vco_tx_off_1_s;
wire [23:0] tdd_rx_on_1_s;
wire [23:0] tdd_rx_off_1_s;
wire [23:0] tdd_tx_on_1_s;
wire [23:0] tdd_tx_off_1_s;
wire [23:0] tdd_tx_dp_on_1_s;
wire [23:0] tdd_tx_dp_off_1_s;
wire [23:0] tdd_vco_rx_on_2_s;
wire [23:0] tdd_vco_rx_off_2_s;
wire [23:0] tdd_vco_tx_on_2_s;
wire [23:0] tdd_vco_tx_off_2_s;
wire [23:0] tdd_rx_on_2_s;
wire [23:0] tdd_rx_off_2_s;
wire [23:0] tdd_tx_on_2_s;
wire [23:0] tdd_tx_off_2_s;
wire [23:0] tdd_tx_dp_on_2_s;
wire [23:0] tdd_tx_dp_off_2_s;
wire tdd_endof_frame;
wire tdd_endof_burst;
wire tdd_txrx_only_en_s;
assign tdd_counter_status = tdd_counter;
// synchronization of tdd_sync
always @(posedge clk) begin
if (rst == 1'b1) begin
tdd_sync_d1 <= 1'b0;
tdd_sync_d2 <= 1'b0;
tdd_sync_d3 <= 1'b0;
end else begin
tdd_sync_d1 <= tdd_sync;
tdd_sync_d2 <= tdd_sync_d1;
tdd_sync_d3 <= tdd_sync_d2;
end
end
// ***************************************************************************
// tdd counter (state machine)
// ***************************************************************************
always @(posedge clk) begin
if (rst == 1'b1) begin
tdd_cstate <= OFF;
end else begin
tdd_cstate <= tdd_cstate_next;
end
end
always @* begin
tdd_cstate_next <= tdd_cstate;
case (tdd_cstate)
ON : begin
if ((tdd_enable == 1'b0) || (tdd_endof_burst == 1'b1)) begin
tdd_cstate_next <= OFF;
end
end
OFF : begin
if(tdd_enable == 1'b1) begin
tdd_cstate_next <= ((~tdd_sync_d3 & tdd_sync_d2) == 1'b1) ? ON : OFF;
end
end
endcase
end
assign tdd_endof_frame = (tdd_counter == tdd_frame_length) ? 1'b1 : 1'b0;
assign tdd_endof_burst = ((tdd_last_burst == 1'b1) && (tdd_counter == tdd_frame_length)) ? 1'b1 : 1'b0;
// tdd free running counter
always @(posedge clk) begin
if (rst == 1'b1) begin
tdd_counter <= tdd_counter_init;
end else begin
if (tdd_cstate == ON) begin
if ((~tdd_sync_d3 & tdd_sync_d2) == 1'b1) begin
tdd_counter <= 24'b0;
end else begin
tdd_counter <= (tdd_counter < tdd_frame_length) ? tdd_counter + 1 : 24'b0;
end
end else begin
tdd_counter <= tdd_counter_init;
end
end
end
// tdd burst counter
always @(posedge clk) begin
if (tdd_cstate == OFF) begin
tdd_burst_counter <= tdd_burst_count;
end else if ((tdd_burst_counter != 0) && (tdd_endof_frame == 1'b1)) begin
tdd_burst_counter <= tdd_burst_counter - 1'b1;
end
end
always @(posedge clk) begin
tdd_last_burst <= (tdd_burst_counter == 6'b1) ? 1'b1 : 1'b0;
end
// ***************************************************************************
// generate control signals
// ***************************************************************************
// start/stop rx vco
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_on_1 <= 1'b0;
end else if(tdd_counter == tdd_vco_rx_on_1_s) begin
counter_at_tdd_vco_rx_on_1 <= 1'b1;
end else begin
counter_at_tdd_vco_rx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_on_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_rx_on_2_s)) begin
counter_at_tdd_vco_rx_on_2 <= 1'b1;
end else begin
counter_at_tdd_vco_rx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_off_1 <= 1'b0;
end else if(tdd_counter == tdd_vco_rx_off_1_s) begin
counter_at_tdd_vco_rx_off_1 <= 1'b1;
end else begin
counter_at_tdd_vco_rx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_rx_off_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_rx_off_2_s)) begin
counter_at_tdd_vco_rx_off_2 <= 1'b1;
end else begin
counter_at_tdd_vco_rx_off_2 <= 1'b0;
end
end
// start/stop tx vco
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_on_1 <= 1'b0;
end else if(tdd_counter == tdd_vco_tx_on_1_s) begin
counter_at_tdd_vco_tx_on_1 <= 1'b1;
end else begin
counter_at_tdd_vco_tx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_on_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_tx_on_2_s)) begin
counter_at_tdd_vco_tx_on_2 <= 1'b1;
end else begin
counter_at_tdd_vco_tx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_off_1 <= 1'b0;
end else if(tdd_counter == tdd_vco_tx_off_1_s) begin
counter_at_tdd_vco_tx_off_1 <= 1'b1;
end else begin
counter_at_tdd_vco_tx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_vco_tx_off_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_vco_tx_off_2_s)) begin
counter_at_tdd_vco_tx_off_2 <= 1'b1;
end else begin
counter_at_tdd_vco_tx_off_2 <= 1'b0;
end
end
// start/stop rx rf path
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_on_1 <= 1'b0;
end else if(tdd_counter == tdd_rx_on_1_s) begin
counter_at_tdd_rx_on_1 <= 1'b1;
end else begin
counter_at_tdd_rx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_on_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_rx_on_2_s)) begin
counter_at_tdd_rx_on_2 <= 1'b1;
end else begin
counter_at_tdd_rx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_off_1 <= 1'b0;
end else if(tdd_counter == tdd_rx_off_1_s) begin
counter_at_tdd_rx_off_1 <= 1'b1;
end else begin
counter_at_tdd_rx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_off_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_rx_off_2_s)) begin
counter_at_tdd_rx_off_2 <= 1'b1;
end else begin
counter_at_tdd_rx_off_2 <= 1'b0;
end
end
// start/stop tx rf path
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_on_1 <= 1'b0;
end else if(tdd_counter == tdd_tx_on_1_s) begin
counter_at_tdd_tx_on_1 <= 1'b1;
end else begin
counter_at_tdd_tx_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_on_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_on_2_s)) begin
counter_at_tdd_tx_on_2 <= 1'b1;
end else begin
counter_at_tdd_tx_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_off_1 <= 1'b0;
end else if(tdd_counter == tdd_tx_off_1_s) begin
counter_at_tdd_tx_off_1 <= 1'b1;
end else begin
counter_at_tdd_tx_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_off_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_off_2_s)) begin
counter_at_tdd_tx_off_2 <= 1'b1;
end else begin
counter_at_tdd_tx_off_2 <= 1'b0;
end
end
// start/stop tx data path
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_on_1 <= 1'b0;
end else if(tdd_counter == tdd_tx_dp_on_1_s) begin
counter_at_tdd_tx_dp_on_1 <= 1'b1;
end else begin
counter_at_tdd_tx_dp_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_on_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_dp_on_2_s)) begin
counter_at_tdd_tx_dp_on_2 <= 1'b1;
end else begin
counter_at_tdd_tx_dp_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_off_1 <= 1'b0;
end else if(tdd_counter == tdd_tx_dp_off_1_s) begin
counter_at_tdd_tx_dp_off_1 <= 1'b1;
end else begin
counter_at_tdd_tx_dp_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_tx_dp_off_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_tx_dp_off_2_s)) begin
counter_at_tdd_tx_dp_off_2 <= 1'b1;
end else begin
counter_at_tdd_tx_dp_off_2 <= 1'b0;
end
end
// start/stop rx data path
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_dp_on_1 <= 1'b0;
end else if(tdd_counter == tdd_rx_dp_on_1) begin
counter_at_tdd_rx_dp_on_1 <= 1'b1;
end else begin
counter_at_tdd_rx_dp_on_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_dp_on_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_rx_dp_on_2)) begin
counter_at_tdd_rx_dp_on_2 <= 1'b1;
end else begin
counter_at_tdd_rx_dp_on_2 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_dp_off_1 <= 1'b0;
end else if(tdd_counter == tdd_rx_dp_off_1) begin
counter_at_tdd_rx_dp_off_1 <= 1'b1;
end else begin
counter_at_tdd_rx_dp_off_1 <= 1'b0;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
counter_at_tdd_rx_dp_off_2 <= 1'b0;
end else if((tdd_secondary == 1'b1) && (tdd_counter == tdd_rx_dp_off_2)) begin
counter_at_tdd_rx_dp_off_2 <= 1'b1;
end else begin
counter_at_tdd_rx_dp_off_2 <= 1'b0;
end
end
// control-path delay compensation
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_on_1_comp (
.clk(clk),
.A(tdd_vco_rx_on_1),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_off_1_comp (
.clk(clk),
.A(tdd_vco_rx_off_1),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_on_1_comp (
.clk(clk),
.A(tdd_vco_tx_on_1),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_off_1_comp (
.clk(clk),
.A(tdd_vco_tx_off_1),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_on_1_comp (
.clk(clk),
.A(tdd_rx_on_1),
.Amax(tdd_frame_length),
.out(tdd_rx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_off_1_comp (
.clk(clk),
.A(tdd_rx_off_1),
.Amax(tdd_frame_length),
.out(tdd_rx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_on_1_comp (
.clk(clk),
.A(tdd_tx_on_1),
.Amax(tdd_frame_length),
.out(tdd_tx_on_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_off_1_comp (
.clk(clk),
.A(tdd_tx_off_1),
.Amax(tdd_frame_length),
.out(tdd_tx_off_1_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_on_2_comp (
.clk(clk),
.A(tdd_vco_rx_on_2),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_rx_off_2_comp (
.clk(clk),
.A(tdd_vco_rx_off_2),
.Amax(tdd_frame_length),
.out(tdd_vco_rx_off_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_on_2_comp (
.clk(clk),
.A(tdd_vco_tx_on_2),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_vco_tx_off_2_comp (
.clk(clk),
.A(tdd_vco_tx_off_2),
.Amax(tdd_frame_length),
.out(tdd_vco_tx_off_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_on_2_comp (
.clk(clk),
.A(tdd_rx_on_2),
.Amax(tdd_frame_length),
.out(tdd_rx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_rx_off_2_comp (
.clk(clk),
.A(tdd_rx_off_2),
.Amax(tdd_frame_length),
.out(tdd_rx_off_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_on_2_comp (
.clk(clk),
.A(tdd_tx_on_2),
.Amax(tdd_frame_length),
.out(tdd_tx_on_2_s),
.CE(1'b1)
);
ad_addsub #(
.A_DATA_WIDTH(24),
.B_DATA_VALUE(CONTROL_PATH_DELAY),
.ADD_OR_SUB_N(0)
) i_tx_off_2_comp (
.clk(clk),
.A(tdd_tx_off_2),
.Amax(tdd_frame_length),
.out(tdd_tx_off_2_s),
.CE(1'b1)
);
// internal data-path delay compensation
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_on_1_comp (
.clk(clk),
.A(tdd_tx_dp_on_1),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_on_1_s),
.CE(1'b1)
);
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_on_2_comp (
.clk(clk),
.A(tdd_tx_dp_on_2),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_on_2_s),
.CE(1'b1)
);
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_off_1_comp (
.clk(clk),
.A(tdd_tx_dp_off_1),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_off_1_s),
.CE(1'b1)
);
ad_addsub #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.A_DATA_WIDTH(24),
.B_DATA_VALUE(TX_DATA_PATH_DELAY),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ADD_OR_SUB_N(0)
) i_tx_dp_off_2_comp (
.clk(clk),
.A(tdd_tx_dp_off_2),
.Amax(tdd_frame_length),
.out(tdd_tx_dp_off_2_s),
.CE(1'b1)
);
// output logic
assign tdd_txrx_only_en_s = tdd_tx_only ^ tdd_rx_only;
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_rx_vco_en <= 1'b0;
end else if((tdd_cstate == OFF) || (counter_at_tdd_vco_rx_off_1 == 1'b1) || (counter_at_tdd_vco_rx_off_2 == 1'b1)) begin
tdd_rx_vco_en <= 1'b0;
end else if((tdd_cstate == ON) && ((counter_at_tdd_vco_rx_on_1 == 1'b1) || (counter_at_tdd_vco_rx_on_2 == 1'b1))) begin
tdd_rx_vco_en <= 1'b1;
end else if((tdd_cstate == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_rx_vco_en <= tdd_rx_only;
end else begin
tdd_rx_vco_en <= tdd_rx_vco_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_tx_vco_en <= 1'b0;
end else if((tdd_cstate == OFF) || (counter_at_tdd_vco_tx_off_1 == 1'b1) || (counter_at_tdd_vco_tx_off_2 == 1'b1)) begin
tdd_tx_vco_en <= 1'b0;
end else if((tdd_cstate == ON) && ((counter_at_tdd_vco_tx_on_1 == 1'b1) || (counter_at_tdd_vco_tx_on_2 == 1'b1))) begin
tdd_tx_vco_en <= 1'b1;
end else if((tdd_cstate == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_tx_vco_en <= tdd_tx_only;
end else begin
tdd_tx_vco_en <= tdd_tx_vco_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_rx_rf_en <= 1'b0;
end else if((tdd_cstate == OFF) || (counter_at_tdd_rx_off_1 == 1'b1) || (counter_at_tdd_rx_off_2 == 1'b1)) begin
tdd_rx_rf_en <= 1'b0;
end else if((tdd_cstate == ON) && ((counter_at_tdd_rx_on_1 == 1'b1) || (counter_at_tdd_rx_on_2 == 1'b1))) begin
tdd_rx_rf_en <= 1'b1;
end else if((tdd_cstate == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_rx_rf_en <= tdd_rx_only;
end else begin
tdd_rx_rf_en <= tdd_rx_rf_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_tx_rf_en <= 1'b0;
end else if((tdd_cstate == OFF) || (counter_at_tdd_tx_off_1 == 1'b1) || (counter_at_tdd_tx_off_2 == 1'b1)) begin
tdd_tx_rf_en <= 1'b0;
end else if((tdd_cstate == ON) && ((counter_at_tdd_tx_on_1 == 1'b1) || (counter_at_tdd_tx_on_2 == 1'b1))) begin
tdd_tx_rf_en <= 1'b1;
end else if((tdd_cstate == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_tx_rf_en <= tdd_tx_only;
end else begin
tdd_tx_rf_en <= tdd_tx_rf_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_tx_dp_en <= 1'b0;
end else if((tdd_cstate == OFF) || (counter_at_tdd_tx_dp_off_1 == 1'b1) || (counter_at_tdd_tx_dp_off_2 == 1'b1)) begin
tdd_tx_dp_en <= 1'b0;
end else if((tdd_cstate == ON) && ((counter_at_tdd_tx_dp_on_1 == 1'b1) || (counter_at_tdd_tx_dp_on_2 == 1'b1))) begin
tdd_tx_dp_en <= 1'b1;
end else if((tdd_cstate == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_tx_dp_en <= tdd_tx_only;
end else begin
tdd_tx_dp_en <= tdd_tx_dp_en;
end
end
always @(posedge clk) begin
if(rst == 1'b1) begin
tdd_rx_dp_en <= 1'b0;
end else if((tdd_cstate == OFF) || (counter_at_tdd_rx_dp_off_1 == 1'b1) || (counter_at_tdd_rx_dp_off_2 == 1'b1)) begin
tdd_rx_dp_en <= 1'b0;
end else if((tdd_cstate == ON) && ((counter_at_tdd_rx_dp_on_1 == 1'b1) || (counter_at_tdd_rx_dp_on_2 == 1'b1))) begin
tdd_rx_dp_en <= 1'b1;
end else if((tdd_cstate == ON) && (tdd_txrx_only_en_s == 1'b1)) begin
tdd_rx_dp_en <= tdd_rx_only;
end else begin
tdd_rx_dp_en <= tdd_rx_dp_en;
end
end
endmodule