zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/common/a10soc/a10soc_system_qsys.tcl

261 lines
11 KiB
Tcl
Raw Normal View History

common/a10soc- add project create tcl procedure
2017-06-06 16:24:13 +00:00
# a10soc carrier qsys
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
set system_type a10soc
common/a10soc- add project create tcl procedure
2017-06-06 16:24:13 +00:00
# clock-&-reset
altera- infer latest versions
2017-05-12 17:40:14 +00:00
add_instance sys_clk clock_source
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
add_interface sys_clk clock sink
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
set_interface_property sys_clk EXPORT_OF sys_clk.clk_in
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
add_interface sys_rstn reset sink
set_interface_property sys_rstn EXPORT_OF sys_clk.clk_in_reset
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
set_instance_parameter_value sys_clk {clockFrequency} {100000000.0}
set_instance_parameter_value sys_clk {clockFrequencyKnown} {1}
common: a10soc: Mark external reset as asynchronous There is no guarantee that the external reset de-assertion is synchronous to the sys_clk, yet the clock bridge marks the reset de-assertion as synchronized to the clock. This can cause recovery or removal timing violations for the registers affected by this reset signal and potentially bring the system into an invalid state after the reset is de-asserted. Mark the reset as not synchronized to the clock signal, this will make sure that Qsys inserts the proper reset synchronizers where required. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-03 15:17:15 +00:00
set_instance_parameter_value sys_clk {resetSynchronousEdges} {NONE}
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
# hps
# round-about way - qsys-script doesn't support {*}?
variable hps_io_list
proc set_hps_io {io_index io_type} {
global hps_io_list
lappend hps_io_list $io_type
}
set_hps_io IO_DEDICATED_04 SDMMC:D0
set_hps_io IO_DEDICATED_05 SDMMC:CMD
set_hps_io IO_DEDICATED_06 SDMMC:CCLK
set_hps_io IO_DEDICATED_07 SDMMC:D1
set_hps_io IO_DEDICATED_08 SDMMC:D2
set_hps_io IO_DEDICATED_09 SDMMC:D3
set_hps_io IO_DEDICATED_10 NONE
set_hps_io IO_DEDICATED_11 NONE
set_hps_io IO_DEDICATED_12 SDMMC:D4
set_hps_io IO_DEDICATED_13 SDMMC:D5
set_hps_io IO_DEDICATED_14 SDMMC:D6
set_hps_io IO_DEDICATED_15 SDMMC:D7
set_hps_io IO_DEDICATED_16 UART1:TX
set_hps_io IO_DEDICATED_17 UART1:RX
set_hps_io IO_SHARED_Q1_01 USB0:CLK
set_hps_io IO_SHARED_Q1_02 USB0:STP
set_hps_io IO_SHARED_Q1_03 USB0:DIR
set_hps_io IO_SHARED_Q1_04 USB0:DATA0
set_hps_io IO_SHARED_Q1_05 USB0:DATA1
set_hps_io IO_SHARED_Q1_06 USB0:NXT
set_hps_io IO_SHARED_Q1_07 USB0:DATA2
set_hps_io IO_SHARED_Q1_08 USB0:DATA3
set_hps_io IO_SHARED_Q1_09 USB0:DATA4
set_hps_io IO_SHARED_Q1_10 USB0:DATA5
set_hps_io IO_SHARED_Q1_11 USB0:DATA6
set_hps_io IO_SHARED_Q1_12 USB0:DATA7
set_hps_io IO_SHARED_Q2_01 EMAC0:TX_CLK
set_hps_io IO_SHARED_Q2_02 EMAC0:TX_CTL
set_hps_io IO_SHARED_Q2_03 EMAC0:RX_CLK
set_hps_io IO_SHARED_Q2_04 EMAC0:RX_CTL
set_hps_io IO_SHARED_Q2_05 EMAC0:TXD0
set_hps_io IO_SHARED_Q2_06 EMAC0:TXD1
set_hps_io IO_SHARED_Q2_07 EMAC0:RXD0
set_hps_io IO_SHARED_Q2_08 EMAC0:RXD1
set_hps_io IO_SHARED_Q2_09 EMAC0:TXD2
set_hps_io IO_SHARED_Q2_10 EMAC0:TXD3
set_hps_io IO_SHARED_Q2_11 EMAC0:RXD2
set_hps_io IO_SHARED_Q2_12 EMAC0:RXD3
set_hps_io IO_SHARED_Q3_01 NONE
set_hps_io IO_SHARED_Q3_02 NONE
set_hps_io IO_SHARED_Q3_03 NONE
set_hps_io IO_SHARED_Q3_04 NONE
set_hps_io IO_SHARED_Q3_05 NONE
set_hps_io IO_SHARED_Q3_06 GPIO
set_hps_io IO_SHARED_Q3_07 NONE
set_hps_io IO_SHARED_Q3_08 NONE
set_hps_io IO_SHARED_Q3_09 NONE
set_hps_io IO_SHARED_Q3_10 NONE
set_hps_io IO_SHARED_Q3_11 MDIO0:MDIO
set_hps_io IO_SHARED_Q3_12 MDIO0:MDC
set_hps_io IO_SHARED_Q4_01 I2C1:SDA
set_hps_io IO_SHARED_Q4_02 I2C1:SCL
set_hps_io IO_SHARED_Q4_03 GPIO
set_hps_io IO_SHARED_Q4_04 NONE
set_hps_io IO_SHARED_Q4_05 GPIO
set_hps_io IO_SHARED_Q4_06 GPIO
set_hps_io IO_SHARED_Q4_07 NONE
set_hps_io IO_SHARED_Q4_08 NONE
set_hps_io IO_SHARED_Q4_09 NONE
set_hps_io IO_SHARED_Q4_10 NONE
set_hps_io IO_SHARED_Q4_11 NONE
set_hps_io IO_SHARED_Q4_12 NONE
altera- infer latest versions
2017-05-12 17:40:14 +00:00
add_instance sys_hps altera_arria10_hps
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
set_instance_parameter_value sys_hps {MPU_EVENTS_Enable} {0}
set_instance_parameter_value sys_hps {F2S_Width} {0}
set_instance_parameter_value sys_hps {S2F_Width} {0}
set_instance_parameter_value sys_hps {LWH2F_Enable} {1}
set_instance_parameter_value sys_hps {F2SDRAM_PORT_CONFIG} {6}
set_instance_parameter_value sys_hps {F2SDRAM0_ENABLED} {1}
set_instance_parameter_value sys_hps {F2SINTERRUPT_Enable} {1}
set_instance_parameter_value sys_hps {HPS_IO_Enable} $hps_io_list
set_instance_parameter_value sys_hps {SDMMC_PinMuxing} {IO}
set_instance_parameter_value sys_hps {SDMMC_Mode} {8-bit}
set_instance_parameter_value sys_hps {USB0_PinMuxing} {IO}
set_instance_parameter_value sys_hps {USB0_Mode} {default}
set_instance_parameter_value sys_hps {EMAC0_PinMuxing} {IO}
set_instance_parameter_value sys_hps {EMAC0_Mode} {RGMII_with_MDIO}
set_instance_parameter_value sys_hps {UART1_PinMuxing} {IO}
set_instance_parameter_value sys_hps {UART1_Mode} {No_flow_control}
set_instance_parameter_value sys_hps {I2C1_PinMuxing} {IO}
set_instance_parameter_value sys_hps {I2C1_Mode} {default}
set_instance_parameter_value sys_hps {F2H_COLD_RST_Enable} {1}
set_instance_parameter_value sys_hps {H2F_USER0_CLK_Enable} {1}
set_instance_parameter_value sys_hps {H2F_USER0_CLK_FREQ} {175}
set_instance_parameter_value sys_hps {CLK_SDMMC_SOURCE} {1}
add_interface sys_hps_rstn reset sink
set_interface_property sys_hps_rstn EXPORT_OF sys_hps.f2h_cold_reset_req
add_interface sys_hps_out_rstn reset source
set_interface_property sys_hps_out_rstn EXPORT_OF sys_hps.h2f_reset
add_connection sys_clk.clk sys_hps.h2f_lw_axi_clock
a10soc: Connect AXI register reset
2017-11-20 21:31:20 +00:00
add_connection sys_clk.clk_reset sys_hps.h2f_lw_axi_reset
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
add_interface sys_hps_io conduit end
set_interface_property sys_hps_io EXPORT_OF sys_hps.hps_io
common: a10soc: Avoid unnecessary DMA clock domain crossing bridge insertion Both the sys_hps.f2sdram_clock and the sys_dma_clk.clk signal are in the same clock domain. They are both driven by the same clock. And even though qsys is capable of detecting this it seems qsys interconnect is not able to infer this and inserts a extra clock domain crossing bridge between the DMA and the HPS AXI system memory interface. To avoid this connect the sys_dma_clk.clk to the sys_hps.f2sdram_clock so that all components are driven by the same qsys clock signal. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-07-20 14:05:03 +00:00
# common dma interfaces
add_instance sys_dma_clk clock_source
add_connection sys_clk.clk_reset sys_dma_clk.clk_in_reset
add_connection sys_hps.h2f_user0_clock sys_dma_clk.clk_in
add_connection sys_dma_clk.clk sys_hps.f2sdram0_clock
add_connection sys_dma_clk.clk_reset sys_hps.f2sdram0_reset
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
# ddr4 interface
altera- infer latest versions
2017-05-12 17:40:14 +00:00
add_instance sys_hps_ddr4_cntrl altera_emif_a10_hps
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
set_instance_parameter_value sys_hps_ddr4_cntrl {PROTOCOL_ENUM} {PROTOCOL_DDR4}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_MEM_CLK_FREQ_MHZ} {1066.667}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_DEFAULT_REF_CLK_FREQ} {0}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_REF_CLK_FREQ_MHZ} {133.333}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_BANK_GROUP_WIDTH} {1}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_ALERT_N_PLACEMENT_ENUM} {DDR4_ALERT_N_PLACEMENT_DATA_LANES}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_ALERT_N_DQS_GROUP} {3}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_READ_DBI} {1}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TCL} {20}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_WTCL} {18}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_RTT_NOM_ENUM} {DDR4_RTT_NOM_RZQ_6}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_DEFAULT_IO} {0}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_AC_IO_STD_ENUM} {IO_STD_SSTL_12}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_AC_MODE_ENUM} {OUT_OCT_40_CAL}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_CK_IO_STD_ENUM} {IO_STD_SSTL_12}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_CK_MODE_ENUM} {OUT_OCT_40_CAL}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_DATA_IO_STD_ENUM} {IO_STD_POD_12}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_DATA_OUT_MODE_ENUM} {OUT_OCT_34_CAL}
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_DATA_IN_MODE_ENUM} {IN_OCT_60_CAL}
common: a10soc: Use correct DDR memory reference clock type The DDR memory reference clock on the A10SoC development board is differential. Currently the EMIF core it is configured for single-ended configuration, which causes it to generate incorrect IOSTANDARD constraints. Those incorrect constraints get overwritten again in system_assign.tcl, so things are working, but this generates a warning when building the design Configure the EMIF core correctly and remove the manual constraint overwrite since they are no longer necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-07-28 17:11:03 +00:00
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_PLL_REF_CLK_IO_STD_ENUM} {IO_STD_LVDS_NO_OCT}
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
set_instance_parameter_value sys_hps_ddr4_cntrl {PHY_DDR4_USER_RZQ_IO_STD_ENUM} {IO_STD_CMOS_12}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_SPEEDBIN_ENUM} {DDR4_SPEEDBIN_2666}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TRCD_NS} {14.25}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TRP_NS} {14.25}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TRRD_S_CYC} {7}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TRRD_L_CYC} {8}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TFAW_NS} {30.0}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TWTR_S_CYC} {4}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_TWTR_L_CYC} {10}
set_instance_parameter_value sys_hps_ddr4_cntrl {MEM_DDR4_LRDIMM_VREFDQ_VALUE} {1D}
set_instance_parameter_value sys_hps_ddr4_cntrl {DIAG_DDR4_SKIP_CA_LEVEL} {1}
set_instance_parameter_value sys_hps_ddr4_cntrl {SHORT_QSYS_INTERFACE_NAMES} {0}
add_interface sys_hps_ddr_rstn reset sink
set_interface_property sys_hps_ddr_rstn EXPORT_OF sys_hps_ddr4_cntrl.global_reset_reset_sink
add_connection sys_hps_ddr4_cntrl.hps_emif_conduit_end sys_hps.emif
add_interface sys_hps_ddr conduit end
set_interface_property sys_hps_ddr EXPORT_OF sys_hps_ddr4_cntrl.mem_conduit_end
add_interface sys_hps_ddr_oct conduit end
set_interface_property sys_hps_ddr_oct EXPORT_OF sys_hps_ddr4_cntrl.oct_conduit_end
add_interface sys_hps_ddr_ref_clk clock sink
set_interface_property sys_hps_ddr_ref_clk EXPORT_OF sys_hps_ddr4_cntrl.pll_ref_clk_clock_sink
# cpu/hps handling
proc ad_cpu_interrupt {m_irq m_port} {
add_connection sys_hps.f2h_irq0 ${m_port}
set_connection_parameter_value sys_hps.f2h_irq0/${m_port} irqNumber ${m_irq}
}
proc ad_cpu_interconnect {m_base m_port} {
add_connection sys_hps.h2f_lw_axi_master ${m_port}
set_connection_parameter_value sys_hps.h2f_lw_axi_master/${m_port} baseAddress ${m_base}
}
proc ad_dma_interconnect {m_port} {
add_connection ${m_port} sys_hps.f2sdram0_data
set_connection_parameter_value ${m_port}/sys_hps.f2sdram0_data baseAddress {0x0}
}
adrv9371x/altera- gpio equivalency fix
2017-03-27 20:37:55 +00:00
# gpio-bd
altera- infer latest versions
2017-05-12 17:40:14 +00:00
add_instance sys_gpio_bd altera_avalon_pio
adrv9371x/altera- gpio equivalency fix
2017-03-27 20:37:55 +00:00
set_instance_parameter_value sys_gpio_bd {direction} {InOut}
set_instance_parameter_value sys_gpio_bd {generateIRQ} {1}
set_instance_parameter_value sys_gpio_bd {width} {32}
add_connection sys_clk.clk_reset sys_gpio_bd.reset
add_connection sys_clk.clk sys_gpio_bd.clk
add_interface sys_gpio_bd conduit end
set_interface_property sys_gpio_bd EXPORT_OF sys_gpio_bd.external_connection
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
# gpio-in
altera- infer latest versions
2017-05-12 17:40:14 +00:00
add_instance sys_gpio_in altera_avalon_pio
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
set_instance_parameter_value sys_gpio_in {direction} {Input}
set_instance_parameter_value sys_gpio_in {generateIRQ} {1}
set_instance_parameter_value sys_gpio_in {width} {32}
add_connection sys_clk.clk_reset sys_gpio_in.reset
add_connection sys_clk.clk sys_gpio_in.clk
add_interface sys_gpio_in conduit end
set_interface_property sys_gpio_in EXPORT_OF sys_gpio_in.external_connection
# gpio-out
altera- infer latest versions
2017-05-12 17:40:14 +00:00
add_instance sys_gpio_out altera_avalon_pio
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
set_instance_parameter_value sys_gpio_out {direction} {Output}
set_instance_parameter_value sys_gpio_out {generateIRQ} {0}
set_instance_parameter_value sys_gpio_out {width} {32}
add_connection sys_clk.clk_reset sys_gpio_out.reset
add_connection sys_clk.clk sys_gpio_out.clk
add_interface sys_gpio_out conduit end
set_interface_property sys_gpio_out EXPORT_OF sys_gpio_out.external_connection
# spi
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
altera- infer latest versions
2017-05-12 17:40:14 +00:00
add_instance sys_spi altera_avalon_spi
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
set_instance_parameter_value sys_spi {clockPhase} {0}
set_instance_parameter_value sys_spi {clockPolarity} {0}
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
set_instance_parameter_value sys_spi {dataWidth} {8}
set_instance_parameter_value sys_spi {masterSPI} {1}
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
set_instance_parameter_value sys_spi {numberOfSlaves} {8}
a10soc: Common, increase SPI frequency to 10MHz
2018-10-22 11:13:36 +00:00
set_instance_parameter_value sys_spi {targetClockRate} {10000000.0}
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
add_connection sys_clk.clk_reset sys_spi.reset
add_connection sys_clk.clk sys_spi.clk
add_interface sys_spi conduit end
set_interface_property sys_spi EXPORT_OF sys_spi.external
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
# base-addresses
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
adrv9371x/altera- gpio equivalency fix
2017-03-27 20:37:55 +00:00
ad_cpu_interconnect 0x000000d0 sys_gpio_bd.s1
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
ad_cpu_interconnect 0x00000000 sys_gpio_in.s1
ad_cpu_interconnect 0x00000020 sys_gpio_out.s1
ad_cpu_interconnect 0x00000040 sys_spi.spi_control_port
a10soc: Switched to tcl flow
2016-09-08 08:31:06 +00:00
# interrupts
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
ad_cpu_interrupt 5 sys_gpio_in.irq
adrv9371x/altera- gpio equivalency fix
2017-03-27 20:37:55 +00:00
ad_cpu_interrupt 6 sys_gpio_bd.irq
a10soc- xcvr updates
2016-10-26 17:13:49 +00:00
ad_cpu_interrupt 7 sys_spi.irq