zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/axi_ad9122/axi_ad9122.v

277 lines
8.6 KiB
Coq
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// ***************************************************************************
// ***************************************************************************
all: Update license for all hdl source files All the hdl (verilog and vhdl) source files were updated. If a file did not have any license, it was added into it. Files, which were generated by a tool (like Matlab) or were took over from other source (like opencores.org), were unchanged. New license looks as follows: Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. Each core or library found in this collection may have its own licensing terms. The user should keep this in in mind while exploring these cores. Redistribution and use in source and binary forms, with or without modification of this file, are permitted under the terms of either (at the option of the user): 1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory, or at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html OR 2. An ADI specific BSD license as noted in the top level directory, or on-line at: https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 08:44:52 +00:00
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
axi_ad9122: Update core to the new DRP interface
2016-09-21 13:09:55 +00:00
//
all: Update license for all hdl source files All the hdl (verilog and vhdl) source files were updated. If a file did not have any license, it was added into it. Files, which were generated by a tool (like Matlab) or were took over from other source (like opencores.org), were unchanged. New license looks as follows: Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. Each core or library found in this collection may have its own licensing terms. The user should keep this in in mind while exploring these cores. Redistribution and use in source and binary forms, with or without modification of this file, are permitted under the terms of either (at the option of the user): 1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory, or at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html OR 2. An ADI specific BSD license as noted in the top level directory, or on-line at: https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 08:44:52 +00:00
// Each core or library found in this collection may have its own licensing terms.
// The user should keep this in in mind while exploring these cores.
axi_ad9122: Update core to the new DRP interface
2016-09-21 13:09:55 +00:00
//
all: Update license for all hdl source files All the hdl (verilog and vhdl) source files were updated. If a file did not have any license, it was added into it. Files, which were generated by a tool (like Matlab) or were took over from other source (like opencores.org), were unchanged. New license looks as follows: Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. Each core or library found in this collection may have its own licensing terms. The user should keep this in in mind while exploring these cores. Redistribution and use in source and binary forms, with or without modification of this file, are permitted under the terms of either (at the option of the user): 1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory, or at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html OR 2. An ADI specific BSD license as noted in the top level directory, or on-line at: https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 08:44:52 +00:00
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
// (at the option of the user):
axi_ad9122: Update core to the new DRP interface
2016-09-21 13:09:55 +00:00
//
all: Update license for all hdl source files All the hdl (verilog and vhdl) source files were updated. If a file did not have any license, it was added into it. Files, which were generated by a tool (like Matlab) or were took over from other source (like opencores.org), were unchanged. New license looks as follows: Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. Each core or library found in this collection may have its own licensing terms. The user should keep this in in mind while exploring these cores. Redistribution and use in source and binary forms, with or without modification of this file, are permitted under the terms of either (at the option of the user): 1. The GNU General Public License version 2 as published by the Free Software Foundation, which can be found in the top level directory, or at: https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html OR 2. An ADI specific BSD license as noted in the top level directory, or on-line at: https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 08:44:52 +00:00
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
all: Update verilog files to verilog-2001
2017-04-13 08:45:54 +00:00
module axi_ad9122 #(
parameter ID = 0,
parameter DEVICE_TYPE = 0,
parameter SERDES_OR_DDR_N = 1,
parameter MMCM_OR_BUFIO_N = 1,
parameter MMCM_CLKIN_PERIOD = 1.667,
parameter MMCM_VCO_DIV = 2,
parameter MMCM_VCO_MUL = 4,
parameter MMCM_CLK0_DIV = 2,
parameter MMCM_CLK1_DIV = 8,
parameter DAC_DATAPATH_DISABLE = 0,
parameter IO_DELAY_GROUP = "dev_if_delay_group") (
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// dac interface
all: Update verilog files to verilog-2001
2017-04-13 08:45:54 +00:00
input dac_clk_in_p,
input dac_clk_in_n,
output dac_clk_out_p,
output dac_clk_out_n,
output dac_frame_out_p,
output dac_frame_out_n,
output [15:0] dac_data_out_p,
output [15:0] dac_data_out_n,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// master/slave
all: Update verilog files to verilog-2001
2017-04-13 08:45:54 +00:00
output dac_sync_out,
input dac_sync_in,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// dma interface
all: Update verilog files to verilog-2001
2017-04-13 08:45:54 +00:00
output dac_div_clk,
output dac_valid_0,
output dac_enable_0,
input [63:0] dac_ddata_0,
output dac_valid_1,
output dac_enable_1,
input [63:0] dac_ddata_1,
input dac_dovf,
input dac_dunf,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// axi interface
all: Update verilog files to verilog-2001
2017-04-13 08:45:54 +00:00
input s_axi_aclk,
input s_axi_aresetn,
input s_axi_awvalid,
input [31:0] s_axi_awaddr,
output s_axi_awready,
input s_axi_wvalid,
input [31:0] s_axi_wdata,
input [ 3:0] s_axi_wstrb,
output s_axi_wready,
output s_axi_bvalid,
output [ 1:0] s_axi_bresp,
input s_axi_bready,
input s_axi_arvalid,
input [31:0] s_axi_araddr,
output s_axi_arready,
output s_axi_rvalid,
output [31:0] s_axi_rdata,
output [ 1:0] s_axi_rresp,
input s_axi_rready,
input [ 2:0] s_axi_awprot,
input [ 2:0] s_axi_arprot);
library axi-slave missing protection signal added
2016-07-22 16:54:27 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// internal clocks and resets
wire dac_rst;
wire mmcm_rst;
wire up_clk;
wire up_rstn;
// internal signals
wire dac_frame_i0_s;
wire [15:0] dac_data_i0_s;
wire dac_frame_i1_s;
wire [15:0] dac_data_i1_s;
wire dac_frame_i2_s;
wire [15:0] dac_data_i2_s;
wire dac_frame_i3_s;
wire [15:0] dac_data_i3_s;
wire dac_frame_q0_s;
wire [15:0] dac_data_q0_s;
wire dac_frame_q1_s;
wire [15:0] dac_data_q1_s;
wire dac_frame_q2_s;
wire [15:0] dac_data_q2_s;
wire dac_frame_q3_s;
wire [15:0] dac_data_q3_s;
wire dac_status_s;
wire up_drp_sel_s;
wire up_drp_wr_s;
wire [11:0] up_drp_addr_s;
axi_ad9122: Update core to the new DRP interface
2016-09-21 13:09:55 +00:00
wire [31:0] up_drp_wdata_s;
wire [31:0] up_drp_rdata_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
wire up_drp_ready_s;
wire up_drp_locked_s;
wire up_wreq_s;
wire [13:0] up_waddr_s;
wire [31:0] up_wdata_s;
wire up_wack_s;
wire up_rreq_s;
wire [13:0] up_raddr_s;
wire [31:0] up_rdata_s;
wire up_rack_s;
// signal name changes
assign up_clk = s_axi_aclk;
assign up_rstn = s_axi_aresetn;
// device interface
axi_ad9122_if #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.DEVICE_TYPE (DEVICE_TYPE),
.SERDES_OR_DDR_N (SERDES_OR_DDR_N),
axi_ad9122: optional clock out control
2016-03-22 16:50:02 +00:00
.MMCM_OR_BUFIO_N (MMCM_OR_BUFIO_N),
.MMCM_CLKIN_PERIOD (MMCM_CLKIN_PERIOD),
.MMCM_VCO_DIV (MMCM_VCO_DIV),
.MMCM_VCO_MUL (MMCM_VCO_MUL),
.MMCM_CLK0_DIV (MMCM_CLK0_DIV),
.MMCM_CLK1_DIV (MMCM_CLK1_DIV))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_if (
.dac_clk_in_p (dac_clk_in_p),
.dac_clk_in_n (dac_clk_in_n),
.dac_clk_out_p (dac_clk_out_p),
.dac_clk_out_n (dac_clk_out_n),
.dac_frame_out_p (dac_frame_out_p),
.dac_frame_out_n (dac_frame_out_n),
.dac_data_out_p (dac_data_out_p),
.dac_data_out_n (dac_data_out_n),
.dac_rst (dac_rst),
.dac_clk (),
.dac_div_clk (dac_div_clk),
.dac_status (dac_status_s),
.dac_frame_i0 (dac_frame_i0_s),
.dac_data_i0 (dac_data_i0_s),
.dac_frame_i1 (dac_frame_i1_s),
.dac_data_i1 (dac_data_i1_s),
.dac_frame_i2 (dac_frame_i2_s),
.dac_data_i2 (dac_data_i2_s),
.dac_frame_i3 (dac_frame_i3_s),
.dac_data_i3 (dac_data_i3_s),
.dac_frame_q0 (dac_frame_q0_s),
.dac_data_q0 (dac_data_q0_s),
.dac_frame_q1 (dac_frame_q1_s),
.dac_data_q1 (dac_data_q1_s),
.dac_frame_q2 (dac_frame_q2_s),
.dac_data_q2 (dac_data_q2_s),
.dac_frame_q3 (dac_frame_q3_s),
.dac_data_q3 (dac_data_q3_s),
.mmcm_rst (mmcm_rst),
.up_clk (up_clk),
.up_rstn (up_rstn),
.up_drp_sel (up_drp_sel_s),
.up_drp_wr (up_drp_wr_s),
.up_drp_addr (up_drp_addr_s),
.up_drp_wdata (up_drp_wdata_s),
.up_drp_rdata (up_drp_rdata_s),
.up_drp_ready (up_drp_ready_s),
.up_drp_locked (up_drp_locked_s));
// core
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
axi_ad9122_core #(.ID(ID), .DATAPATH_DISABLE(DAC_DATAPATH_DISABLE)) i_core (
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.dac_div_clk (dac_div_clk),
.dac_rst (dac_rst),
.dac_frame_i0 (dac_frame_i0_s),
.dac_data_i0 (dac_data_i0_s),
.dac_frame_i1 (dac_frame_i1_s),
.dac_data_i1 (dac_data_i1_s),
.dac_frame_i2 (dac_frame_i2_s),
.dac_data_i2 (dac_data_i2_s),
.dac_frame_i3 (dac_frame_i3_s),
.dac_data_i3 (dac_data_i3_s),
.dac_frame_q0 (dac_frame_q0_s),
.dac_data_q0 (dac_data_q0_s),
.dac_frame_q1 (dac_frame_q1_s),
.dac_data_q1 (dac_data_q1_s),
.dac_frame_q2 (dac_frame_q2_s),
.dac_data_q2 (dac_data_q2_s),
.dac_frame_q3 (dac_frame_q3_s),
.dac_data_q3 (dac_data_q3_s),
.dac_status (dac_status_s),
.dac_sync_out (dac_sync_out),
.dac_sync_in (dac_sync_in),
.dac_valid_0 (dac_valid_0),
.dac_enable_0 (dac_enable_0),
.dac_ddata_0 (dac_ddata_0),
.dac_valid_1 (dac_valid_1),
.dac_enable_1 (dac_enable_1),
.dac_ddata_1 (dac_ddata_1),
.dac_dovf (dac_dovf),
.dac_dunf (dac_dunf),
.mmcm_rst (mmcm_rst),
.up_drp_sel (up_drp_sel_s),
.up_drp_wr (up_drp_wr_s),
.up_drp_addr (up_drp_addr_s),
.up_drp_wdata (up_drp_wdata_s),
.up_drp_rdata (up_drp_rdata_s),
.up_drp_ready (up_drp_ready_s),
.up_drp_locked (up_drp_locked_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s),
.up_rack (up_rack_s));
// up bus interface
up_axi i_up_axi (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_axi_awvalid (s_axi_awvalid),
.up_axi_awaddr (s_axi_awaddr),
.up_axi_awready (s_axi_awready),
.up_axi_wvalid (s_axi_wvalid),
.up_axi_wdata (s_axi_wdata),
.up_axi_wstrb (s_axi_wstrb),
.up_axi_wready (s_axi_wready),
.up_axi_bvalid (s_axi_bvalid),
.up_axi_bresp (s_axi_bresp),
.up_axi_bready (s_axi_bready),
.up_axi_arvalid (s_axi_arvalid),
.up_axi_araddr (s_axi_araddr),
.up_axi_arready (s_axi_arready),
.up_axi_rvalid (s_axi_rvalid),
.up_axi_rresp (s_axi_rresp),
.up_axi_rdata (s_axi_rdata),
.up_axi_rready (s_axi_rready),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s),
.up_rack (up_rack_s));
endmodule
// ***************************************************************************
// ***************************************************************************