pluto_hdl_adi/library/axi_dmac/dest_fifo_inf.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms. 
// The user should keep this in in mind while exploring these cores. 
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
//  (at the option of the user):
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
//   2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************

module dmac_dest_fifo_inf (
  input clk,
  input resetn,

  input enable,
  output enabled,
  input sync_id,
  output sync_id_ret,

  input [ID_WIDTH-1:0] request_id,
  output [ID_WIDTH-1:0] response_id,
  output [ID_WIDTH-1:0] data_id,
  input data_eot,
  input response_eot,

  input en,
  output [DATA_WIDTH-1:0] dout,
  output valid,
  output underflow,

        output xfer_req,

  output fifo_ready,
  input fifo_valid,
  input [DATA_WIDTH-1:0] fifo_data,

  input req_valid,
  output req_ready,
  input [BEATS_PER_BURST_WIDTH-1:0] req_last_burst_length,

  output response_valid,
  input response_ready,
  output response_resp_eot,
  output [1:0] response_resp
);

parameter ID_WIDTH = 3;
parameter DATA_WIDTH = 64;
parameter BEATS_PER_BURST_WIDTH = 4;

assign sync_id_ret = sync_id;
wire data_enabled;

wire _fifo_ready;
assign fifo_ready = _fifo_ready | ~enabled;

reg en_d1;
wire data_ready;
wire data_valid;

always @(posedge clk)
begin
  if (resetn == 1'b0) begin
    en_d1 <= 1'b0;
  end else begin
    en_d1 <= en;
  end
end

assign underflow = en_d1 & (~data_valid | ~enable);
assign data_ready = en_d1 & (data_valid | ~enable);
assign valid = en_d1 & data_valid & enable;

dmac_data_mover # (
  .ID_WIDTH(ID_WIDTH),
  .DATA_WIDTH(DATA_WIDTH),
  .BEATS_PER_BURST_WIDTH(BEATS_PER_BURST_WIDTH),
  .DISABLE_WAIT_FOR_ID(0)
) i_data_mover (
  .clk(clk),
  .resetn(resetn),

  .enable(enable),
  .enabled(data_enabled),
  .sync_id(sync_id),
        .xfer_req(xfer_req),

  .request_id(request_id),
  .response_id(data_id),
  .eot(data_eot),
  
  .req_valid(req_valid),
  .req_ready(req_ready),
  .req_last_burst_length(req_last_burst_length),

  .s_axi_ready(_fifo_ready),
  .s_axi_valid(fifo_valid),
  .s_axi_data(fifo_data),
  .m_axi_ready(data_ready),
  .m_axi_valid(data_valid),
  .m_axi_data(dout),
  .m_axi_last()
);

dmac_response_generator # (
  .ID_WIDTH(ID_WIDTH)
) i_response_generator (
  .clk(clk),
  .resetn(resetn),

  .enable(data_enabled),
  .enabled(enabled),
  .sync_id(sync_id),

  .request_id(data_id),
  .response_id(response_id),

  .eot(response_eot),

  .resp_valid(response_valid),
  .resp_ready(response_ready),
  .resp_eot(response_resp_eot),
  .resp_resp(response_resp)
);

endmodule