pluto_hdl_adi/library/axi_ad9265/axi_ad9265.v

334 lines
9.6 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2014-2023 Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
2018-03-14 14:45:47 +00:00
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_ad9265 #(
parameter ID = 0,
parameter FPGA_TECHNOLOGY = 0,
parameter FPGA_FAMILY = 0,
parameter SPEED_GRADE = 0,
parameter DEV_PACKAGE = 0,
parameter ADC_DATAPATH_DISABLE = 0,
parameter IO_DELAY_GROUP = "adc_if_delay_group"
) (
// adc interface (clk, data, over-range)
input adc_clk_in_p,
input adc_clk_in_n,
input [ 7:0] adc_data_in_p,
input [ 7:0] adc_data_in_n,
input adc_or_in_p,
input adc_or_in_n,
// delay interface
input delay_clk,
// dma interface
output adc_clk,
output adc_rst,
output adc_valid,
output adc_enable,
output [15:0] adc_data,
input adc_dovf,
// axi interface
input s_axi_aclk,
input s_axi_aresetn,
input s_axi_awvalid,
input [15:0] s_axi_awaddr,
output s_axi_awready,
input s_axi_wvalid,
input [31:0] s_axi_wdata,
input [ 3:0] s_axi_wstrb,
output s_axi_wready,
output s_axi_bvalid,
output [ 1:0] s_axi_bresp,
input s_axi_bready,
input s_axi_arvalid,
input [15:0] s_axi_araddr,
output s_axi_arready,
output s_axi_rvalid,
output [ 1:0] s_axi_rresp,
output [31:0] s_axi_rdata,
input s_axi_rready,
input [ 2:0] s_axi_awprot,
input [ 2:0] s_axi_arprot
);
// internal registers
reg up_status_pn_err = 'd0;
reg up_status_pn_oos = 'd0;
reg up_status_or = 'd0;
reg [31:0] up_rdata = 'd0;
reg up_wack = 'd0;
reg up_rack = 'd0;
// internal clocks & resets
wire up_rstn;
wire up_clk;
wire delay_rst;
// internal signals
wire [15:0] adc_data_s;
wire adc_or_s;
wire up_status_pn_err_s;
wire up_status_pn_oos_s;
wire up_status_or_s;
wire adc_status_s;
wire [ 8:0] up_dld_s;
wire [44:0] up_dwdata_s;
wire [44:0] up_drdata_s;
wire delay_locked_s;
wire [13:0] up_raddr_s;
wire [31:0] up_rdata_s[0:2];
wire up_rack_s[0:2];
wire up_wack_s[0:2];
wire up_wreq_s;
wire [13:0] up_waddr_s;
wire [31:0] up_wdata_s;
wire up_rreq_s;
// signal name changes
assign up_clk = s_axi_aclk;
assign up_rstn = s_axi_aresetn;
// processor read interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_status_pn_err <= 'd0;
up_status_pn_oos <= 'd0;
up_status_or <= 'd0;
up_rdata <= 'd0;
up_rack <= 'd0;
up_wack <= 'd0;
end else begin
up_status_pn_err <= up_status_pn_err_s;
up_status_pn_oos <= up_status_pn_oos_s;
up_status_or <= up_status_or_s;
up_rdata <= up_rdata_s[0] | up_rdata_s[1] | up_rdata_s[2];
up_rack <= up_rack_s[0] | up_rack_s[1] | up_rack_s[2];
up_wack <= up_wack_s[0] | up_wack_s[1] | up_wack_s[2];
end
end
// channel
axi_ad9265_channel #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.CHANNEL_ID(0),
.DATAPATH_DISABLE (ADC_DATAPATH_DISABLE)
) i_channel (
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_data (adc_data_s),
.adc_or (adc_or_s),
.adc_dcfilter_data_out (adc_data),
.adc_enable (adc_enable),
.adc_valid (adc_valid),
.up_adc_pn_err (up_status_pn_err_s),
.up_adc_pn_oos (up_status_pn_oos_s),
.up_adc_or (up_status_or_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s[0]),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s[0]),
.up_rack (up_rack_s[0]));
// main (device interface)
axi_ad9265_if #(
.FPGA_TECHNOLOGY (FPGA_TECHNOLOGY),
.IO_DELAY_GROUP (IO_DELAY_GROUP)
) i_if (
.adc_clk_in_p (adc_clk_in_p),
.adc_clk_in_n (adc_clk_in_n),
.adc_data_in_p (adc_data_in_p),
.adc_data_in_n (adc_data_in_n),
.adc_or_in_p (adc_or_in_p),
.adc_or_in_n (adc_or_in_n),
.adc_clk (adc_clk),
.adc_data (adc_data_s),
.adc_or (adc_or_s),
.adc_status (adc_status_s),
.up_clk (up_clk),
.up_dld (up_dld_s),
.up_dwdata (up_dwdata_s),
.up_drdata (up_drdata_s),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked_s));
// adc delay control
up_delay_cntrl #(
.DATA_WIDTH(9),
.BASE_ADDRESS(6'h02)
) i_delay_cntrl (
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked_s),
.up_dld (up_dld_s),
.up_dwdata (up_dwdata_s),
.up_drdata (up_drdata_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s[2]),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s[2]),
.up_rack (up_rack_s[2]));
// common processor control
up_adc_common #(
.ID (ID),
.FPGA_TECHNOLOGY (FPGA_TECHNOLOGY),
.FPGA_FAMILY (FPGA_FAMILY),
.SPEED_GRADE (SPEED_GRADE),
.DEV_PACKAGE (DEV_PACKAGE),
.CONFIG (0),
.COMMON_ID (6'h00),
.DRP_DISABLE (6'h00),
.USERPORTS_DISABLE (0),
.GPIO_DISABLE (0),
.START_CODE_DISABLE(0)
) i_up_adc_common (
.mmcm_rst (),
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_r1_mode (),
.adc_ddr_edgesel (),
.adc_pin_mode (),
.adc_status (adc_status_s),
.adc_sync_status (1'd0),
.adc_status_ovf (adc_dovf),
.adc_clk_ratio (32'd1),
.adc_start_code (),
.adc_sref_sync (),
.adc_sync (),
.adc_ext_sync_arm (),
.adc_ext_sync_disarm (),
.adc_ext_sync_manual_req (),
.adc_num_lanes (),
.adc_custom_control (),
.adc_crc_enable (),
.adc_sdr_ddr_n (),
.adc_symb_op (),
.adc_symb_8_16b (),
.up_pps_rcounter(32'd0),
.up_pps_status(1'd0),
.up_pps_irq_mask(),
.up_adc_r1_mode (),
.up_adc_ce (),
.up_status_pn_err (up_status_pn_err),
.up_status_pn_oos (up_status_pn_oos),
.up_status_or (up_status_or),
.up_drp_sel (),
.up_drp_wr (),
.up_drp_addr (),
.up_drp_wdata (),
.up_drp_rdata (32'd0),
.up_drp_ready (1'd0),
.up_drp_locked (1'd1),
.adc_config_wr (),
.adc_config_ctrl (),
.adc_config_rd ('d0),
.adc_ctrl_status ('d0),
2017-05-10 18:45:17 +00:00
.up_usr_chanmax_out (),
.up_usr_chanmax_in (8'd0),
.up_adc_gpio_in (32'd0),
.up_adc_gpio_out (),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s[1]),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s[1]),
.up_rack (up_rack_s[1]));
// up bus interface
up_axi i_up_axi (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_axi_awvalid (s_axi_awvalid),
.up_axi_awaddr (s_axi_awaddr),
.up_axi_awready (s_axi_awready),
.up_axi_wvalid (s_axi_wvalid),
.up_axi_wdata (s_axi_wdata),
.up_axi_wstrb (s_axi_wstrb),
.up_axi_wready (s_axi_wready),
.up_axi_bvalid (s_axi_bvalid),
.up_axi_bresp (s_axi_bresp),
.up_axi_bready (s_axi_bready),
.up_axi_arvalid (s_axi_arvalid),
.up_axi_araddr (s_axi_araddr),
.up_axi_arready (s_axi_arready),
.up_axi_rvalid (s_axi_rvalid),
.up_axi_rresp (s_axi_rresp),
.up_axi_rdata (s_axi_rdata),
.up_axi_rready (s_axi_rready),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata),
.up_rack (up_rack));
endmodule