zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/jesd204/jesd204_tx/jesd204_tx_constr.ttcl

64 lines
2.1 KiB
Plaintext
Raw Normal View History

Add copyright & license for all files needing ADI JESD specific license * Added every year when the file was edited, with comma * Range if it's consecutive years Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-08-18 07:55:04 +00:00
###############################################################################
## Copyright (C) 2017, 2018, 2021 Analog Devices, Inc. All rights reserved.
### SPDX short identifier: ADIJESD204
###############################################################################
jesd204_rx/tx: make SYSREF IOB placement optional In case when the SYSREF is connected to an FPGA IO which has a limitation on the IOB register IN_FF clock line and the required ref clock is high we can't use the IOB registers. e.g. the max clock rate on zcu102 HP IO FF is 312MHz but ref clock is 375MHz; If IOB is used in this case a pulse width violation is reported. This change makes the IOB placement selectable in such case or for targets which don't require class 1 operation.
2018-07-23 11:58:46 +00:00
<: set ComponentName [getComponentNameString] :>
<: setOutputDirectory "./" :>
<: setFileName [ttcl_add $ComponentName "_constr"] :>
<: setFileExtension ".xdc" :>
<: setFileProcessingOrder late :>
<: set sysref_iob [get_property PARAM_VALUE.SYSREF_IOB] :>
jesd204: Xilinx: NP=12 support To support deterministic latency with non-power of two octets per frame (F=3,6) the interface width towards the transport layer must be resized to match integer multiple of frames. e.g Input datapath width = 4; Output datpath width = 6; for F=3 one beat contains 2 frames for F=6 one beat contains 1 frame The width change is realized with a gearbox. Due the interface width change the single clock domain core is split in two clock domains. - Link clock : lane rate / 40 for input datapath width of 4 octets 8b10b - lane rate / 20 for input datapath width of 8 octets 8b10b - lane rate / 66 for input datapath width of 8 octets 64b66b - Device clock : Link clock * input data path width / output datapath width Interface to transport layer and SYSREF handling is moved to device clock domain. The configuration interface reflects the dual clock domain. If Input and Output datapath width matches, the gearbox is no longer required, a single clock can be connected to both clocks.
2020-10-27 15:40:37 +00:00
<: set async_clk [getBooleanValue "ASYNC_CLK"] :>
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
set_property ASYNC_REG TRUE \
[get_cells {i_lmfc/sysref_d1_reg}] \
[get_cells {i_lmfc/sysref_d2_reg}]
# Make sure that the device clock to sysref skew is at least somewhat
# predictable
jesd204_rx/tx: make SYSREF IOB placement optional In case when the SYSREF is connected to an FPGA IO which has a limitation on the IOB register IN_FF clock line and the required ref clock is high we can't use the IOB registers. e.g. the max clock rate on zcu102 HP IO FF is 312MHz but ref clock is 375MHz; If IOB is used in this case a pulse width violation is reported. This change makes the IOB placement selectable in such case or for targets which don't require class 1 operation.
2018-07-23 11:58:46 +00:00
set_property IOB <=: $sysref_iob :> \
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
[get_cells {i_lmfc/sysref_r_reg}]
jesd204: Xilinx: NP=12 support To support deterministic latency with non-power of two octets per frame (F=3,6) the interface width towards the transport layer must be resized to match integer multiple of frames. e.g Input datapath width = 4; Output datpath width = 6; for F=3 one beat contains 2 frames for F=6 one beat contains 1 frame The width change is realized with a gearbox. Due the interface width change the single clock domain core is split in two clock domains. - Link clock : lane rate / 40 for input datapath width of 4 octets 8b10b - lane rate / 20 for input datapath width of 8 octets 8b10b - lane rate / 66 for input datapath width of 8 octets 64b66b - Device clock : Link clock * input data path width / output datapath width Interface to transport layer and SYSREF handling is moved to device clock domain. The configuration interface reflects the dual clock domain. If Input and Output datapath width matches, the gearbox is no longer required, a single clock can be connected to both clocks.
2020-10-27 15:40:37 +00:00
<: if {$async_clk} { :>
set link_clk [get_clocks -of_objects [get_ports -quiet {clk}]]
set device_clk [get_clocks -of_objects [get_ports -quiet {device_clk}]]
# sync event i_sync_lmfc
set_false_path -quiet \
-from $device_clk \
-to [get_cells -quiet -hier *cdc_sync_stage1_reg* \
-filter {NAME =~ *i_sync_lmfc/i_sync_out* && IS_SEQUENTIAL}]
set_false_path -quiet \
-from $link_clk \
-to [get_cells -quiet -hier *cdc_sync_stage1_reg* \
-filter {NAME =~ *i_sync_lmfc/i_sync_in* && IS_SEQUENTIAL}]
# sync bits i_next_mf_ready_cdc
set_false_path \
-from $link_clk \
-to [get_cells -quiet -hier *cdc_sync_stage1_reg* \
-filter {NAME =~ *i_next_mf_ready_cdc* && IS_SEQUENTIAL}]
# sync bits i_link_reset_done_cdc
set_false_path \
-from $link_clk \
-to [get_cells -quiet -hier *cdc_sync_stage1_reg* \
-filter {NAME =~ *i_link_reset_done_cdc* && IS_SEQUENTIAL}]
# sync bits gearbox/i_sync_ready
set_false_path \
-from $link_clk \
-to [get_cells -quiet -hier *cdc_sync_stage1_reg* \
-filter {NAME =~ *i_sync_ready* && IS_SEQUENTIAL}]
# gearbox distributed RAM
set_false_path -quiet \
-from $device_clk \
-to [get_cells -quiet -hier *mem_rd_data_reg* \
-filter {NAME =~ *i_tx_gearbox* && IS_SEQUENTIAL}]
<: } :>