zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/common/de10nano/de10nano_system_qsys.tcl

337 lines
17 KiB
Tcl
Raw Normal View History

common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
# de10nano carrier qsys
# system clock
add_instance sys_clk clock_source
set_instance_parameter_value sys_clk {clockFrequency} {50000000.0}
set_instance_parameter_value sys_clk {clockFrequencyKnown} {1}
set_instance_parameter_value sys_clk {resetSynchronousEdges} {NONE}
add_interface sys_clk clock sink
add_interface sys_rst reset sink
set_interface_property sys_clk EXPORT_OF sys_clk.clk_in
set_interface_property sys_rst EXPORT_OF sys_clk.clk_in_reset
# hps
add_instance sys_hps altera_hps
set_instance_parameter_value sys_hps {MPU_EVENTS_Enable} {0}
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
set_instance_parameter_value sys_hps {F2SCLK_SDRAMCLK_Enable} {0}
set_instance_parameter_value sys_hps {F2SDRAM_Type} {AXI-3 AXI-3}
set_instance_parameter_value sys_hps {F2SDRAM_Width} {128 128}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value sys_hps {F2SINTERRUPT_Enable} {1}
set_instance_parameter_value sys_hps {EMAC0_PinMuxing} {Unused}
set_instance_parameter_value sys_hps {EMAC0_Mode} {N/A}
set_instance_parameter_value sys_hps {EMAC1_PinMuxing} {HPS I/O Set 0}
set_instance_parameter_value sys_hps {EMAC1_Mode} {RGMII}
set_instance_parameter_value sys_hps {SDIO_PinMuxing} {HPS I/O Set 0}
set_instance_parameter_value sys_hps {SDIO_Mode} {4-bit Data}
set_instance_parameter_value sys_hps {USB0_PinMuxing} {Unused}
set_instance_parameter_value sys_hps {USB0_Mode} {N/A}
set_instance_parameter_value sys_hps {USB1_PinMuxing} {HPS I/O Set 0}
set_instance_parameter_value sys_hps {USB1_Mode} {SDR}
set_instance_parameter_value sys_hps {SPIM0_PinMuxing} {Unused}
set_instance_parameter_value sys_hps {SPIM0_Mode} {N/A}
set_instance_parameter_value sys_hps {SPIM1_PinMuxing} {HPS I/O Set 0}
set_instance_parameter_value sys_hps {SPIM1_Mode} {Single Slave Select}
set_instance_parameter_value sys_hps {UART0_PinMuxing} {HPS I/O Set 0}
set_instance_parameter_value sys_hps {UART0_Mode} {No Flow Control}
set_instance_parameter_value sys_hps {UART1_PinMuxing} {Unused}
set_instance_parameter_value sys_hps {UART1_Mode} {N/A}
set_instance_parameter_value sys_hps {I2C0_PinMuxing} {FPGA}
set_instance_parameter_value sys_hps {I2C0_Mode} {Full}
cn0540: Add de10nano reference design
2020-06-03 13:14:07 +00:00
set_instance_parameter_value sys_hps {I2C1_PinMuxing} {FPGA}
set_instance_parameter_value sys_hps {I2C1_Mode} {Full}
de10nano: Add hps_conv_usb_n signal to stabilize UART lines Without defining this signal, the UART lines receive garbage data when no cable is connected to the J4 USB UART port. The GPIO9 is enabled in the reference base design along with the 4MA CURRENT_STRENGTH constraint on the UART pins
2020-12-22 09:35:00 +00:00
set_instance_parameter_value sys_hps {GPIO_Enable} {No No No No No No No No No Yes No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No}
set_instance_parameter_value sys_hps {LOANIO_Enable} {No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value sys_hps {desired_cfg_clk_mhz} {80.0}
set_instance_parameter_value sys_hps {S2FCLK_USER0CLK_Enable} {1}
set_instance_parameter_value sys_hps {S2FCLK_USER1CLK_Enable} {1}
set_instance_parameter_value sys_hps {S2FCLK_USER2CLK_Enable} {1}
set_instance_parameter_value sys_hps {S2FCLK_USER0CLK_FREQ} {80.0}
set_instance_parameter_value sys_hps {S2FCLK_USER1CLK_FREQ} {20.0}
set_instance_parameter_value sys_hps {S2FCLK_USER2CLK_FREQ} {100.0}
set_instance_parameter_value sys_hps {HPS_PROTOCOL} {DDR3}
set_instance_parameter_value sys_hps {MEM_CLK_FREQ} {400.0}
set_instance_parameter_value sys_hps {REF_CLK_FREQ} {25.0}
set_instance_parameter_value sys_hps {MEM_VOLTAGE} {1.5V DDR3}
set_instance_parameter_value sys_hps {MEM_CLK_FREQ_MAX} {800.0}
set_instance_parameter_value sys_hps {MEM_DQ_WIDTH} {32}
set_instance_parameter_value sys_hps {MEM_ROW_ADDR_WIDTH} {15}
set_instance_parameter_value sys_hps {MEM_COL_ADDR_WIDTH} {10}
set_instance_parameter_value sys_hps {MEM_BANKADDR_WIDTH} {3}
set_instance_parameter_value sys_hps {MEM_TCL} {7}
set_instance_parameter_value sys_hps {MEM_DRV_STR} {RZQ/6}
set_instance_parameter_value sys_hps {MEM_RTT_NOM} {RZQ/6}
set_instance_parameter_value sys_hps {MEM_WTCL} {7}
set_instance_parameter_value sys_hps {MEM_RTT_WR} {Dynamic ODT off}
set_instance_parameter_value sys_hps {TIMING_TIS} {175}
set_instance_parameter_value sys_hps {TIMING_TIH} {250}
set_instance_parameter_value sys_hps {TIMING_TDS} {50}
set_instance_parameter_value sys_hps {TIMING_TDH} {125}
set_instance_parameter_value sys_hps {TIMING_TDQSQ} {120}
set_instance_parameter_value sys_hps {TIMING_TQH} {0.38}
set_instance_parameter_value sys_hps {TIMING_TDQSCK} {400}
set_instance_parameter_value sys_hps {TIMING_TDQSS} {0.25}
set_instance_parameter_value sys_hps {TIMING_TQSH} {0.38}
set_instance_parameter_value sys_hps {TIMING_TDSH} {0.2}
set_instance_parameter_value sys_hps {TIMING_TDSS} {0.2}
set_instance_parameter_value sys_hps {MEM_TINIT_US} {500}
set_instance_parameter_value sys_hps {MEM_TMRD_CK} {4}
set_instance_parameter_value sys_hps {MEM_TRAS_NS} {35.0}
set_instance_parameter_value sys_hps {MEM_TRCD_NS} {13.75}
set_instance_parameter_value sys_hps {MEM_TRP_NS} {13.75}
set_instance_parameter_value sys_hps {MEM_TREFI_US} {7.8}
set_instance_parameter_value sys_hps {MEM_TRFC_NS} {300.0}
set_instance_parameter_value sys_hps {MEM_TWR_NS} {15.0}
set_instance_parameter_value sys_hps {MEM_TWTR} {4}
set_instance_parameter_value sys_hps {MEM_TFAW_NS} {37.5}
set_instance_parameter_value sys_hps {MEM_TRRD_NS} {7.5}
set_instance_parameter_value sys_hps {MEM_TRTP_NS} {7.5}
set_instance_parameter_value sys_hps {TIMING_BOARD_MAX_CK_DELAY} {0.6}
set_instance_parameter_value sys_hps {TIMING_BOARD_MAX_DQS_DELAY} {0.6}
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_CKDQS_DIMM_MIN} {-0.01}
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_CKDQS_DIMM_MAX} {0.01}
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_WITHIN_DQS} {0.02}
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_BETWEEN_DQS} {0.02}
set_instance_parameter_value sys_hps {TIMING_BOARD_DQ_TO_DQS_SKEW} {0.0}
set_instance_parameter_value sys_hps {TIMING_BOARD_AC_SKEW} {0.02}
set_instance_parameter_value sys_hps {TIMING_BOARD_AC_TO_CK_SKEW} {0.0}
add_interface sys_hps_memory conduit end
set_interface_property sys_hps_memory EXPORT_OF sys_hps.memory
add_interface sys_hps_hps_io conduit end
set_interface_property sys_hps_hps_io EXPORT_OF sys_hps.hps_io
add_interface sys_hps_h2f_reset reset source
set_interface_property sys_hps_h2f_reset EXPORT_OF sys_hps.h2f_reset
add_connection sys_clk.clk sys_hps.h2f_axi_clock
add_connection sys_clk.clk sys_hps.f2h_axi_clock
add_connection sys_clk.clk sys_hps.h2f_lw_axi_clock
add_interface sys_hps_i2c0 conduit end
set_interface_property sys_hps_i2c0 EXPORT_OF sys_hps.i2c0
add_interface sys_hps_i2c0_clk clock source
set_interface_property sys_hps_i2c0_clk EXPORT_OF sys_hps.i2c0_clk
add_interface sys_hps_i2c0_scl_in clock sink
set_interface_property sys_hps_i2c0_scl_in EXPORT_OF sys_hps.i2c0_scl_in
cn0540: Add de10nano reference design
2020-06-03 13:14:07 +00:00
add_interface sys_hps_i2c1 conduit end
set_interface_property sys_hps_i2c1 EXPORT_OF sys_hps.i2c1
add_interface sys_hps_i2c1_clk clock source
set_interface_property sys_hps_i2c1_clk EXPORT_OF sys_hps.i2c1_clk
add_interface sys_hps_i2c1_scl_in clock sink
set_interface_property sys_hps_i2c1_scl_in EXPORT_OF sys_hps.i2c1_scl_in
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
# cpu/hps handling
proc ad_cpu_interrupt {m_irq m_port} {
add_connection sys_hps.f2h_irq0 ${m_port}
set_connection_parameter_value sys_hps.f2h_irq0/${m_port} irqNumber ${m_irq}
}
proc ad_cpu_interconnect {m_base m_port} {
add_connection sys_hps.h2f_lw_axi_master ${m_port}
set_connection_parameter_value sys_hps.h2f_lw_axi_master/${m_port} baseAddress ${m_base}
}
proc ad_dma_interconnect {m_port} {
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
add_connection ${m_port} sys_hps.f2h_sdram1_data
set_connection_parameter_value ${m_port}/sys_hps.f2h_sdram1_data baseAddress {0x0000}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
}
# common dma interfaces clock
add_instance sys_dma_clk clock_source
add_connection sys_hps.h2f_user0_clock sys_dma_clk.clk_in
add_connection sys_clk.clk_reset sys_dma_clk.clk_in_reset
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
add_connection sys_dma_clk.clk sys_hps.f2h_sdram1_clock
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
# internal memory
add_instance sys_int_mem altera_avalon_onchip_memory2
set_instance_parameter_value sys_int_mem {dualPort} {0}
set_instance_parameter_value sys_int_mem {dataWidth} {64}
set_instance_parameter_value sys_int_mem {memorySize} {65536.0}
set_instance_parameter_value sys_int_mem {initMemContent} {0}
add_connection sys_clk.clk sys_int_mem.clk1
add_connection sys_clk.clk_reset sys_int_mem.reset1
add_connection sys_hps.h2f_axi_master sys_int_mem.s1
set_connection_parameter_value sys_hps.h2f_axi_master/sys_int_mem.s1 baseAddress {0x0000}
# id
add_instance sys_id altera_avalon_sysid_qsys
set_instance_parameter_value sys_id {id} {-1395322110}
add_connection sys_clk.clk sys_id.clk
add_connection sys_clk.clk_reset sys_id.reset
# gpio-bd
add_instance sys_gpio_bd altera_avalon_pio
set_instance_parameter_value sys_gpio_bd {direction} {InOut}
set_instance_parameter_value sys_gpio_bd {generateIRQ} {1}
set_instance_parameter_value sys_gpio_bd {width} {32}
add_connection sys_clk.clk sys_gpio_bd.clk
add_connection sys_clk.clk_reset sys_gpio_bd.reset
add_interface sys_gpio_bd conduit end
set_interface_property sys_gpio_bd EXPORT_OF sys_gpio_bd.external_connection
# gpio-in
add_instance sys_gpio_in altera_avalon_pio
set_instance_parameter_value sys_gpio_in {direction} {Input}
set_instance_parameter_value sys_gpio_in {generateIRQ} {1}
set_instance_parameter_value sys_gpio_in {width} {32}
add_connection sys_clk.clk_reset sys_gpio_in.reset
add_connection sys_clk.clk sys_gpio_in.clk
add_interface sys_gpio_in conduit end
set_interface_property sys_gpio_in EXPORT_OF sys_gpio_in.external_connection
# gpio-out
add_instance sys_gpio_out altera_avalon_pio
set_instance_parameter_value sys_gpio_out {direction} {Output}
set_instance_parameter_value sys_gpio_out {generateIRQ} {0}
set_instance_parameter_value sys_gpio_out {width} {32}
add_connection sys_clk.clk_reset sys_gpio_out.reset
add_connection sys_clk.clk sys_gpio_out.clk
add_interface sys_gpio_out conduit end
set_interface_property sys_gpio_out EXPORT_OF sys_gpio_out.external_connection
# spi
add_instance sys_spi altera_avalon_spi
set_instance_parameter_value sys_spi {clockPhase} {0}
set_instance_parameter_value sys_spi {clockPolarity} {1}
set_instance_parameter_value sys_spi {dataWidth} {8}
set_instance_parameter_value sys_spi {masterSPI} {1}
set_instance_parameter_value sys_spi {numberOfSlaves} {1}
set_instance_parameter_value sys_spi {targetClockRate} {50000000.0}
add_connection sys_clk.clk sys_spi.clk
add_connection sys_clk.clk_reset sys_spi.reset
add_interface sys_spi conduit end
set_interface_property sys_spi EXPORT_OF sys_spi.external
# spi for LTC2308
add_instance ltc2308_spi altera_avalon_spi
set_instance_parameter_value ltc2308_spi {clockPhase} {0}
cn0540: Add de10nano reference design
2020-06-03 13:14:07 +00:00
set_instance_parameter_value ltc2308_spi {clockPolarity} {0}
set_instance_parameter_value ltc2308_spi {dataWidth} {12}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value ltc2308_spi {masterSPI} {1}
set_instance_parameter_value ltc2308_spi {numberOfSlaves} {1}
set_instance_parameter_value ltc2308_spi {targetClockRate} {50000000.0}
add_connection sys_clk.clk ltc2308_spi.clk
add_connection sys_clk.clk_reset ltc2308_spi.reset
add_interface ltc2308_spi conduit end
set_interface_property ltc2308_spi EXPORT_OF ltc2308_spi.external
# hdmi
add_instance axi_hdmi_tx_0 axi_hdmi_tx 1.0
set_instance_parameter_value axi_hdmi_tx_0 {CR_CB_N} {0}
set_instance_parameter_value axi_hdmi_tx_0 {INTERFACE} {24_BIT}
set_instance_parameter_value axi_hdmi_tx_0 {ID} {0}
common/de10nano: Cosmetic updates only
2020-10-05 09:06:27 +00:00
add_interface axi_hdmi_tx_0_hdmi_if conduit end
set_interface_property axi_hdmi_tx_0_hdmi_if EXPORT_OF axi_hdmi_tx_0.hdmi_if
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
add_instance pixel_clk_pll altera_pll
set_instance_parameter_value pixel_clk_pll {gui_feedback_clock} {Global Clock}
set_instance_parameter_value pixel_clk_pll {gui_operation_mode} {direct}
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
set_instance_parameter_value pixel_clk_pll {gui_number_of_clocks} {2}
set_instance_parameter_value pixel_clk_pll {gui_output_clock_frequency0} {148.5}
set_instance_parameter_value pixel_clk_pll {gui_output_clock_frequency1} {200}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value pixel_clk_pll {gui_phase_shift0} {0}
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
set_instance_parameter_value pixel_clk_pll {gui_phase_shift1} {0}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value pixel_clk_pll {gui_phase_shift_deg0} {0.0}
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
set_instance_parameter_value pixel_clk_pll {gui_phase_shift_deg1} {0.0}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value pixel_clk_pll {gui_phout_division} {1}
set_instance_parameter_value pixel_clk_pll {gui_pll_auto_reset} {Off}
set_instance_parameter_value pixel_clk_pll {gui_pll_bandwidth_preset} {Auto}
set_instance_parameter_value pixel_clk_pll {gui_pll_mode} {Fractional-N PLL}
set_instance_parameter_value pixel_clk_pll {gui_ps_units0} {ps}
set_instance_parameter_value pixel_clk_pll {gui_refclk_switch} {0}
set_instance_parameter_value pixel_clk_pll {gui_reference_clock_frequency} {50.0}
set_instance_parameter_value pixel_clk_pll {gui_switchover_delay} {0}
set_instance_parameter_value pixel_clk_pll {gui_en_reconf} {1}
add_instance pixel_clk_pll_reconfig altera_pll_reconfig
set_instance_parameter_value pixel_clk_pll_reconfig {ENABLE_BYTEENABLE} {0}
set_instance_parameter_value pixel_clk_pll_reconfig {ENABLE_MIF} {0}
set_instance_parameter_value pixel_clk_pll_reconfig {MIF_FILE_NAME} {}
common/de10nano: Cosmetic updates only
2020-10-05 09:06:27 +00:00
add_connection pixel_clk_pll.reconfig_from_pll pixel_clk_pll_reconfig.reconfig_from_pll
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll endPort {}
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll endPortLSB {0}
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll startPort {}
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll startPortLSB {0}
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll width {0}
add_connection pixel_clk_pll.reconfig_to_pll pixel_clk_pll_reconfig.reconfig_to_pll
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll endPort {}
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll endPortLSB {0}
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll startPort {}
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll startPortLSB {0}
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll width {0}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
add_instance video_dmac axi_dmac
set_instance_parameter_value video_dmac {ASYNC_CLK_DEST_REQ_MANUAL} {1}
set_instance_parameter_value video_dmac {ASYNC_CLK_REQ_SRC_MANUAL} {1}
set_instance_parameter_value video_dmac {ASYNC_CLK_SRC_DEST_MANUAL} {1}
set_instance_parameter_value video_dmac {AUTO_ASYNC_CLK} {1}
set_instance_parameter_value video_dmac {AXI_SLICE_DEST} {0}
set_instance_parameter_value video_dmac {AXI_SLICE_SRC} {0}
set_instance_parameter_value video_dmac {CYCLIC} {1}
set_instance_parameter_value video_dmac {HAS_AXIS_TLAST} {1}
set_instance_parameter_value video_dmac {DMA_2D_TRANSFER} {1}
set_instance_parameter_value video_dmac {DMA_DATA_WIDTH_DEST} {64}
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
set_instance_parameter_value video_dmac {DMA_DATA_WIDTH_SRC} {128}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value video_dmac {DMA_LENGTH_WIDTH} {24}
set_instance_parameter_value video_dmac {DMA_TYPE_DEST} {1}
set_instance_parameter_value video_dmac {DMA_TYPE_SRC} {0}
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
set_instance_parameter_value video_dmac {FIFO_SIZE} {8}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
set_instance_parameter_value video_dmac {ID} {0}
set_instance_parameter_value video_dmac {SYNC_TRANSFER_START} {0}
add_connection video_dmac.m_axis axi_hdmi_tx_0.vdma_if axi4stream
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
add_connection sys_clk.clk pixel_clk_pll.refclk
add_connection sys_clk.clk pixel_clk_pll_reconfig.mgmt_clk
add_connection sys_clk.clk axi_hdmi_tx_0.s_axi_clock
add_connection sys_clk.clk video_dmac.s_axi_clock
add_connection pixel_clk_pll.outclk1 video_dmac.m_src_axi_clock
add_connection pixel_clk_pll.outclk1 video_dmac.if_m_axis_aclk
add_connection pixel_clk_pll.outclk1 sys_hps.f2h_sdram0_clock
add_connection pixel_clk_pll.outclk1 axi_hdmi_tx_0.vdma_clock
axi_hdmi_tx update for: ZedBoard, ZC706, ZC702, de10nano, ADRV9361-Z7035 (#897)
2022-03-29 13:51:21 +00:00
add_connection pixel_clk_pll.outclk0 axi_hdmi_tx_0.reference_clk
common/de10nano: Full HD 60 FPS support -change the video memory interfacing from f2h_axi_slave to f2h_sdram0 - add f2h_sdram1 port as the default interface for converter DMA - set as default the full HD resolution at 60 FPS (pixel clock 148.5MHz) - use a second 200MHz(198MHz) clock from the pixel_clk_pll, as DMA source to destination clock.
2020-10-05 08:51:35 +00:00
add_connection sys_clk.clk_reset pixel_clk_pll.reset
add_connection sys_clk.clk_reset pixel_clk_pll_reconfig.mgmt_reset
add_connection sys_clk.clk_reset axi_hdmi_tx_0.s_axi_reset
add_connection sys_clk.clk_reset video_dmac.m_src_axi_reset
add_connection sys_clk.clk_reset video_dmac.s_axi_reset
add_connection video_dmac.m_src_axi sys_hps.f2h_sdram0_data
set_connection_parameter_value video_dmac.m_src_axi/sys_hps.f2h_sdram0_data baseAddress {0x0000}
common/de10nano: Add de10nano base design
2020-03-31 14:06:13 +00:00
# interrupts
ad_cpu_interrupt 0 sys_gpio_bd.irq
ad_cpu_interrupt 1 sys_spi.irq
ad_cpu_interrupt 2 sys_gpio_in.irq
ad_cpu_interrupt 3 ltc2308_spi.irq
ad_cpu_interrupt 7 video_dmac.interrupt_sender
# cpu interconnects
ad_cpu_interconnect 0x00108000 sys_spi.spi_control_port
ad_cpu_interconnect 0x00010000 sys_id.control_slave
ad_cpu_interconnect 0x00010080 sys_gpio_bd.s1
ad_cpu_interconnect 0x00010100 sys_gpio_in.s1
ad_cpu_interconnect 0x00080000 video_dmac.s_axi
ad_cpu_interconnect 0x00090000 axi_hdmi_tx_0.s_axi
ad_cpu_interconnect 0x00100000 pixel_clk_pll_reconfig.mgmt_avalon_slave
ad_cpu_interconnect 0x00109000 sys_gpio_out.s1
ad_cpu_interconnect 0x0010A000 ltc2308_spi.spi_control_port