pluto_hdl_adi/library/util_axis_fifo/address_sync.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2013(c) Analog Devices, Inc.
//  Author: Lars-Peter Clausen <lars@metafoo.de>
// 
// All rights reserved.
// 
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//    
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************

module fifo_address_sync (
	input clk,
	input resetn,

	input m_axis_ready,
	output reg m_axis_valid,
	output reg  [ADDRESS_WIDTH-1:0] m_axis_raddr,
	output [ADDRESS_WIDTH:0] m_axis_level,

	output reg s_axis_ready,
	input s_axis_valid,
	output reg s_axis_empty,
	output reg [ADDRESS_WIDTH-1:0] s_axis_waddr,
	output [ADDRESS_WIDTH:0] s_axis_room
);

parameter ADDRESS_WIDTH = 4;

reg [ADDRESS_WIDTH:0] room = 2**ADDRESS_WIDTH;
reg [ADDRESS_WIDTH:0] level = 'h00;
reg [ADDRESS_WIDTH:0] level_next;

assign s_axis_room = room;
assign m_axis_level = level;

wire read = m_axis_ready & m_axis_valid;
wire write = s_axis_ready & s_axis_valid;

always @(posedge clk)
begin
	if (resetn == 1'b0) begin
		s_axis_waddr <= 'h00;
		m_axis_raddr <= 'h00;
	end else begin
		if (write)
			s_axis_waddr <= s_axis_waddr + 1'b1;
		if (read)
			m_axis_raddr <= m_axis_raddr + 1'b1;
	end
end

always @(*)
begin
	if (read & ~write)
		level_next <= level - 1'b1;
	else if (~read & write)
		level_next <= level + 1'b1;
	else
		level_next <= level;
end

always @(posedge clk)
begin
	if (resetn == 1'b0) begin
		m_axis_valid <= 1'b0;
		s_axis_ready <= 1'b0;
		level <= 'h00;
		room <= 2**ADDRESS_WIDTH;
		s_axis_empty <= 'h00;
	end else begin
		level <= level_next;
		room <= 2**ADDRESS_WIDTH - level_next;
		m_axis_valid <= level_next != 0;
		s_axis_ready <= level_next != 2**ADDRESS_WIDTH;
		s_axis_empty <= level_next == 0;
	end
end

endmodule