2023-07-10 08:38:46 +00:00
|
|
|
###############################################################################
|
|
|
|
|
## Copyright (C) 2021-2023 Analog Devices, Inc. All rights reserved.
|
|
|
|
|
### SPDX short identifier: ADIBSD
|
|
|
|
|
###############################################################################
|
2020-03-17 08:15:01 +00:00
|
|
|
|
|
|
|
|
# constraints
|
|
|
|
|
|
|
|
|
|
set_property -dict {PACKAGE_PIN BM29 IOSTANDARD LVCMOS12} [get_ports sys_rst]
|
|
|
|
|
|
|
|
|
|
# clocks
|
|
|
|
|
# DDR4 Component Memory I/F clock, fixed 100 MHz LVDS [U76]
|
|
|
|
|
|
|
|
|
|
set_property -dict {PACKAGE_PIN BH51 IOSTANDARD LVDS} [get_ports sys_clk_p]
|
|
|
|
|
set_property -dict {PACKAGE_PIN BJ51 IOSTANDARD LVDS} [get_ports sys_clk_n]
|
|
|
|
|
|
|
|
|
|
# ethernet
|
|
|
|
|
|
|
|
|
|
set_property PACKAGE_PIN BG22 [get_ports phy_tx_p]
|
|
|
|
|
set_property PACKAGE_PIN BH22 [get_ports phy_tx_n]
|
|
|
|
|
set_property PACKAGE_PIN BJ22 [get_ports phy_rx_p]
|
|
|
|
|
set_property PACKAGE_PIN BK21 [get_ports phy_rx_n]
|
|
|
|
|
|
2022-02-14 10:54:42 +00:00
|
|
|
set_property -dict {PACKAGE_PIN BH27 IOSTANDARD LVDS DIFF_TERM_ADV TERM_100} [get_ports phy_clk_p]
|
|
|
|
|
set_property -dict {PACKAGE_PIN BJ27 IOSTANDARD LVDS DIFF_TERM_ADV TERM_100} [get_ports phy_clk_n]
|
2020-03-17 08:15:01 +00:00
|
|
|
|
|
|
|
|
set_property -dict {PACKAGE_PIN BN27 IOSTANDARD LVCMOS18} [get_ports mdio_mdc]
|
|
|
|
|
set_property -dict {PACKAGE_PIN BG23 IOSTANDARD LVCMOS18} [get_ports mdio_mdio]
|
|
|
|
|
|
|
|
|
|
# uart
|
|
|
|
|
|
|
|
|
|
set_property -dict {PACKAGE_PIN BP26 IOSTANDARD LVCMOS18} [get_ports uart_sin]
|
|
|
|
|
set_property -dict {PACKAGE_PIN BN26 IOSTANDARD LVCMOS18} [get_ports uart_sout]
|
|
|
|
|
|
|
|
|
|
set_property -dict {PACKAGE_PIN BH24 IOSTANDARD LVCMOS18} [get_ports gpio_bd[0]] ; ## GPIO_LED_0_LS
|
|
|
|
|
set_property -dict {PACKAGE_PIN BG24 IOSTANDARD LVCMOS18} [get_ports gpio_bd[1]] ; ## GPIO_LED_1_LS
|
|
|
|
|
set_property -dict {PACKAGE_PIN BG25 IOSTANDARD LVCMOS18} [get_ports gpio_bd[2]] ; ## GPIO_LED_2_LS
|
|
|
|
|
set_property -dict {PACKAGE_PIN BF25 IOSTANDARD LVCMOS18} [get_ports gpio_bd[3]] ; ## GPIO_LED_3_LS
|
|
|
|
|
set_property -dict {PACKAGE_PIN BF26 IOSTANDARD LVCMOS18} [get_ports gpio_bd[4]] ; ## GPIO_LED_4_LS
|
|
|
|
|
set_property -dict {PACKAGE_PIN BF27 IOSTANDARD LVCMOS18} [get_ports gpio_bd[5]] ; ## GPIO_LED_5_LS
|
|
|
|
|
set_property -dict {PACKAGE_PIN BG27 IOSTANDARD LVCMOS18} [get_ports gpio_bd[6]] ; ## GPIO_LED_6_LS
|
|
|
|
|
set_property -dict {PACKAGE_PIN BG28 IOSTANDARD LVCMOS18} [get_ports gpio_bd[7]] ; ## GPIO_LED_7_LS
|
|
|
|
|
|
|
|
|
|
# iic
|
|
|
|
|
|
|
|
|
|
set_property -dict {PACKAGE_PIN BM27 IOSTANDARD LVCMOS18 DRIVE 8 SLEW SLOW} [get_ports iic_scl]
|
|
|
|
|
set_property -dict {PACKAGE_PIN BL28 IOSTANDARD LVCMOS18 DRIVE 8 SLEW SLOW} [get_ports iic_sda]
|
|
|
|
|
|
|
|
|
|
# Create SPI clock
|
|
|
|
|
create_generated_clock -name spi_clk \
|
|
|
|
|
-source [get_pins i_system_wrapper/system_i/axi_spi/ext_spi_clk] \
|
|
|
|
|
-divide_by 2 [get_pins i_system_wrapper/system_i/axi_spi/sck_o]
|
|
|
|
|
|
|
|
|
|
# Balance clocks
|
|
|
|
|
#
|
|
|
|
|
# Minimize skew on synchronous CDC timing paths between clocks originating
|
|
|
|
|
# from the same MMCM source. (sys_mem_clk and sys_cpu_clk)
|
|
|
|
|
# This is required mostly by the smart interconnect.
|
|
|
|
|
# Property must be applied directly to the output net of BUFGs.
|
|
|
|
|
set_property CLOCK_DELAY_GROUP BALANCE_CLOCKS \
|
|
|
|
|
[list [get_nets [get_property PARENT [get_nets {i_system_wrapper/system_i/sys_cpu_clk}]]] \
|
|
|
|
|
[get_nets [get_property PARENT [get_nets {i_system_wrapper/system_i/sys_mem_clk}]]] \
|
|
|
|
|
]
|
|
|
|
|
|
