pluto_hdl_adi/projects/cn0506_rgmii/zcu102/system_bd.tcl

42 lines
1.5 KiB
Tcl
Raw Normal View History

2019-09-13 16:28:42 +00:00
source $ad_hdl_dir/projects/common/zcu102/zcu102_system_bd.tcl
# configuring one parameter at a time will end in a validation proces halt
set_property -dict [list \
CONFIG.PSU__ENET0__GRP_MDIO__ENABLE {1} \
CONFIG.PSU__ENET0__GRP_MDIO__IO {EMIO} \
CONFIG.PSU__ENET0__PERIPHERAL__ENABLE {1} \
CONFIG.PSU__ENET0__PERIPHERAL__IO {EMIO} \
CONFIG.PSU__ENET1__PERIPHERAL__ENABLE {1} \
CONFIG.PSU__ENET1__PERIPHERAL__IO {EMIO} \
CONFIG.PSU__ENET1__GRP_MDIO__ENABLE {1} \
CONFIG.PSU__ENET1__GRP_MDIO__IO {EMIO}] [get_bd_cells sys_ps8]
source ../common/cn0506_bd.tcl
ad_connect gmii_to_rgmii_0/GMII sys_ps8/GMII_ENET0
ad_connect gmii_to_rgmii_1/GMII sys_ps8/GMII_ENET1
ad_connect gmii_to_rgmii_0/MDIO_GEM sys_ps8/MDIO_ENET0
ad_connect gmii_to_rgmii_1/MDIO_GEM sys_ps8/MDIO_ENET1
# Remove the unused 250MHz and 500MHz reset generators added in the base design.
delete_bd_objs [get_bd_nets sys_500m_clk] \
[get_bd_nets sys_500m_reset] \
[get_bd_nets sys_500m_resetn] \
[get_bd_cells sys_500m_rstgen] \
[get_bd_nets sys_250m_resetn] \
[get_bd_nets sys_250m_reset] \
[get_bd_nets sys_250m_clk] \
[get_bd_cells sys_250m_rstgen]
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file