pluto_hdl_adi/projects/imageon/common/imageon_bd.tcl

95 lines
4.1 KiB
Tcl
Raw Normal View History

# define additional ports
create_bd_port -dir I spdif_rx
2015-03-24 19:08:22 +00:00
# adv7511 (reconfigure base design)
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property CONFIG.EMBEDDED_SYNC {1} [get_bd_cells axi_hdmi_core]
2015-03-24 19:08:22 +00:00
create_bd_port -dir O -from 15 -to 0 hdmi_es_data
ad_connect hdmi_es_data axi_hdmi_core/hdmi_16_es_data
# adv7611
2015-03-24 19:08:22 +00:00
create_bd_port -dir I hdmi_rx_clk
create_bd_port -dir I -from 15 -to 0 hdmi_rx_data
# iic interface
2015-03-24 19:08:22 +00:00
set axi_iic_imageon [create_bd_cell -type ip -vlnv xilinx.com:ip:axi_iic:2.0 axi_iic_imageon]
set_property -dict [list CONFIG.USE_BOARD_FLOW {true}] $axi_iic_imageon
set_property -dict [list CONFIG.IIC_BOARD_INTERFACE {Custom}] $axi_iic_imageon
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:iic_rtl:1.0 iic_imageon
ad_connect iic_imageon axi_iic_imageon/iic
ad_cpu_interconnect 0x43C40000 axi_iic_imageon
ad_cpu_interrupt ps-11 mb-11 axi_iic_imageon/iic2intc_irpt
# hdmi peripherals
set axi_hdmi_rx_core [create_bd_cell -type ip -vlnv analog.com:user:axi_hdmi_rx:1.0 axi_hdmi_rx_core]
set axi_hdmi_rx_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_hdmi_rx_dma]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.CYCLIC {0}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {1}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {1}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.DMA_2D_TRANSFER {1}] $axi_hdmi_rx_dma
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.SYNC_TRANSFER_START {1}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.DMA_LENGTH_WIDTH {14}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_hdmi_rx_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_hdmi_rx_dma
2015-03-24 19:08:22 +00:00
ad_connect hdmi_rx_clk axi_hdmi_rx_core/hdmi_rx_clk
ad_connect hdmi_rx_data axi_hdmi_rx_core/hdmi_rx_data
ad_connect hdmi_clk axi_hdmi_rx_core/hdmi_clk
ad_connect hdmi_clk axi_hdmi_rx_dma/fifo_wr_clk
ad_connect axi_hdmi_rx_core/hdmi_dma_sof axi_hdmi_rx_dma/fifo_wr_sync
ad_connect axi_hdmi_rx_core/hdmi_dma_de axi_hdmi_rx_dma/fifo_wr_en
ad_connect axi_hdmi_rx_core/hdmi_dma_data axi_hdmi_rx_dma/fifo_wr_din
ad_connect axi_hdmi_rx_core/hdmi_dma_ovf axi_hdmi_rx_dma/fifo_wr_overflow
set axi_spdif_rx_core [create_bd_cell -type ip -vlnv analog.com:user:axi_spdif_rx:1.0 axi_spdif_rx_core]
set_property -dict [list CONFIG.C_S_AXI_ADDR_WIDTH {16}] $axi_spdif_rx_core
set_property -dict [list CONFIG.C_DMA_TYPE {1}] $axi_spdif_rx_core
set_property -dict [list CONFIG.PCW_USE_DMA3 {1}] $sys_ps7
ad_connect sys_cpu_clk axi_spdif_rx_core/DMA_REQ_ACLK
ad_connect sys_cpu_clk sys_ps7/DMA3_ACLK
ad_connect sys_cpu_resetn axi_spdif_rx_core/DMA_REQ_RSTN
ad_connect sys_ps7/DMA3_REQ axi_spdif_rx_core/DMA_REQ
ad_connect sys_ps7/DMA3_ACK axi_spdif_rx_core/DMA_ACK
ad_connect spdif_rx axi_spdif_rx_core/spdif_rx_i
2015-03-24 19:08:22 +00:00
ad_cpu_interconnect 0x43100000 axi_hdmi_rx_core
ad_cpu_interconnect 0x43C20000 axi_hdmi_rx_dma
ad_cpu_interconnect 0x75C20000 axi_spdif_rx_core
2015-03-24 19:08:22 +00:00
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_cpu_clk axi_hdmi_rx_dma/m_dest_axi
2015-03-24 19:08:22 +00:00
ad_connect sys_cpu_resetn axi_hdmi_rx_dma/m_dest_axi_aresetn
2015-03-24 19:08:22 +00:00
ad_cpu_interrupt ps-12 mb-12 axi_hdmi_rx_dma/irq
# debug
set ila_fifo_dma_rx [create_bd_cell -type ip -vlnv xilinx.com:ip:ila:5.0 ila_fifo_dma_rx]
set_property -dict [list CONFIG.C_MONITOR_TYPE {Native}] $ila_fifo_dma_rx
set_property -dict [list CONFIG.C_NUM_OF_PROBES {4}] $ila_fifo_dma_rx
set_property -dict [list CONFIG.C_DATA_DEPTH {4096}] $ila_fifo_dma_rx
set_property -dict [list CONFIG.C_PROBE0_WIDTH {1}] $ila_fifo_dma_rx
set_property -dict [list CONFIG.C_PROBE1_WIDTH {1}] $ila_fifo_dma_rx
set_property -dict [list CONFIG.C_PROBE2_WIDTH {64}] $ila_fifo_dma_rx
set_property -dict [list CONFIG.C_PROBE3_WIDTH {1}] $ila_fifo_dma_rx
ad_connect hdmi_rx_clk ila_fifo_dma_rx/clk
ad_connect ila_fifo_dma_rx/probe0 axi_hdmi_rx_dma/fifo_wr_sync
ad_connect ila_fifo_dma_rx/probe1 axi_hdmi_rx_dma/fifo_wr_en
ad_connect ila_fifo_dma_rx/probe2 axi_hdmi_rx_dma/fifo_wr_din
ad_connect ila_fifo_dma_rx/probe3 axi_hdmi_rx_dma/fifo_wr_overflow