zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/ad9081_fmca_ebz/a10soc/system_project.tcl

221 lines
12 KiB
Tcl
Raw Normal View History

scripts: Merge adi_env.tcl into a single file Move the new adi_env.tcl file from hdl/projects/scripts into hdl/scrips
2022-07-12 11:06:15 +00:00
source ../../../scripts/adi_env.tcl
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
source ../../scripts/adi_project_intel.tcl
# get_env_param retrieves parameter value from the environment if exists,
# other case use the default value
#
# Use over-writable parameters from the environment.
#
# e.g.
projects: starndadize the jesd make parameters
2022-09-08 07:48:27 +00:00
# make RX_LANE_RATE=10 TX_LANE_RATE=10 RX_JESD_L=4 RX_JESD_M=8 RX_JESD_S=1 RX_JESD_NP=16 TX_JESD_L=4 TX_JESD_M=8 TX_JESD_S=1 TX_JESD_NP=16
# make RX_LANE_RATE=2.5 TX_LANE_RATE=2.5 RX_JESD_L=8 RX_JESD_M=4 RX_JESD_S=1 RX_JESD_NP=16 TX_JESD_L=8 TX_JESD_M=4 TX_JESD_S=1 TX_JESD_NP=16
# make RX_LANE_RATE=10 TX_LANE_RATE=10 RX_JESD_L=2 RX_JESD_M=8 RX_JESD_S=1 RX_JESD_NP=12 TX_JESD_L=2 TX_JESD_M=8 TX_JESD_S=1 TX_JESD_NP=12
ad9081_fmca_ebz_qsys.tcl: Add RX_LANE_RATE and TX_LANE_RATE parameters For ad9081/a10soc project, the RX_LANE_RATE and TX_LANE_RATE were computed from SAMPLE_RATE. Remove SAMPLE_RATE and add RX_LANE_RATE and TX_LANE_RATE as parameters. Update also computation examples from comments. Signed-off-by: stefan.raus <stefan.raus@analog.com>
2021-11-10 12:11:38 +00:00
#
# Lane Rate = I/Q Sample Rate x M x N' x (10 \ 8) \ L
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
ad9081_fmca_ebz: Update parameter description
2022-03-03 07:43:17 +00:00
# Parameter description:
#
projects: starndadize the jesd make parameters
2022-09-08 07:48:27 +00:00
# RX_LANE_RATE : Lane rate of the Rx link ( MxFE to FPGA )
# TX_LANE_RATE : Lane rate of the Tx link ( FPGA to MxFE )
ad9081_fmca_ebz: Update parameter description
2022-03-03 07:43:17 +00:00
# [RX/TX]_JESD_M : Number of converters per link
# [RX/TX]_JESD_L : Number of lanes per link
# [RX/TX]_JESD_S : Number of samples per frame
# [RX/TX]_JESD_NP : Number of bits per sample
# [RX/TX]_NUM_LINKS : Number of links
# [RX/TX]_KS_PER_CHANNEL : Number of samples stored in internal buffers in kilosamples per converter (M)
#
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
adi_project ad9081_fmca_ebz_a10soc [list \
projects: starndadize the jesd make parameters
2022-09-08 07:48:27 +00:00
RX_LANE_RATE [get_env_param RX_LANE_RATE 10 ] \
TX_LANE_RATE [get_env_param TX_LANE_RATE 10 ] \
RX_JESD_M [get_env_param RX_JESD_M 8 ] \
RX_JESD_L [get_env_param RX_JESD_L 4 ] \
RX_JESD_S [get_env_param RX_JESD_S 1 ] \
RX_JESD_NP [get_env_param RX_JESD_NP 16 ] \
RX_NUM_LINKS [get_env_param RX_NUM_LINKS 1 ] \
TX_JESD_M [get_env_param TX_JESD_M 8 ] \
TX_JESD_L [get_env_param TX_JESD_L 4 ] \
TX_JESD_S [get_env_param TX_JESD_S 1 ] \
TX_JESD_NP [get_env_param TX_JESD_NP 16 ] \
TX_NUM_LINKS [get_env_param TX_NUM_LINKS 1 ] \
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
RX_KS_PER_CHANNEL [get_env_param RX_KS_PER_CHANNEL 32 ] \
TX_KS_PER_CHANNEL [get_env_param TX_KS_PER_CHANNEL 32 ] \
]
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_assign.tcl
# files
Updated the makefiles to build the projects in subdirectories based on the build parameters. Running 'make' will build the default project directly in the project folder (like it did before) Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory. Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory. Running 'make clean' will clean the default project only. Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build. Running 'make clean-all' will delete all the built configurations and libraries. Note that the 'JESD' and 'LANE' words from the parameter names are stripped. Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-09-23 09:28:22 +00:00
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/library/common/ad_3w_spi.v
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
# Note: This projects requires a hardware rework to function correctly.
# The rework connects FMC header pins directly to the FPGA so that they can be
# accessed by the fabric.
#
# Changes required:
# R610: DNI -> R0 PIN_E12
# R611: DNI -> R0 PIN_E13
# R612: R0 -> DNI
# R613: R0 -> DNI
# R620: DNI -> R0 PIN_F13
# R632: DNI -> R0 PIN_F14
# R621: R0 -> DNI
# R633: R0 -> DNI
ad9081_fmca_ebz: a10soc: Update resistor change comment A board rework is required so the clocks, chip selects or sync signal reach the part correctly. Without this the link will not come up.
2022-06-21 08:58:31 +00:00
# R574: DNI -> R0 PIN_W5
# R577: DNI -> R0 PIN_W6
# R576: R0 -> DNI
# R575: R0 -> DNI
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
set_location_assignment PIN_F9 -to "agc0[0]" ; ## D20 LA17_CC_P
set_location_assignment PIN_G9 -to "agc0[1]" ; ## D21 LA17_CC_N
set_location_assignment PIN_G7 -to "agc1[0]" ; ## C22 LA18_CC_P
set_location_assignment PIN_H7 -to "agc1[1]" ; ## C23 LA18_CC_N
set_location_assignment PIN_C3 -to "agc2[0]" ; ## G21 LA20_P
set_location_assignment PIN_C4 -to "agc2[1]" ; ## G22 LA20_N
set_location_assignment PIN_C2 -to "agc3[0]" ; ## H25 LA21_P
set_location_assignment PIN_D3 -to "agc3[1]" ; ## H26 LA21_N
set_location_assignment PIN_W6 -to "clkin6(n)" ; ## G03 CLK1_M2C_N
set_location_assignment PIN_W5 -to "clkin6" ; ## G02 CLK1_M2C_P
set_location_assignment PIN_N28 -to "fpga_refclk_in(n)" ; ## D05 GBTCLK0_M2C_N
set_location_assignment PIN_N29 -to "fpga_refclk_in" ; ## D04 GBTCLK0_M2C_P
set_location_assignment PIN_P34 -to "rx_data[2](n)" ; ## A07 DP2_M2C_N
set_location_assignment PIN_P35 -to "rx_data[2]" ; ## A06 DP2_M2C_P
set_location_assignment PIN_T30 -to "rx_data[0](n)" ; ## C07 DP0_M2C_N
set_location_assignment PIN_T31 -to "rx_data[0]" ; ## C06 DP0_M2C_P
set_location_assignment PIN_L32 -to "rx_data[7](n)" ; ## B13 DP7_M2C_N
set_location_assignment PIN_L33 -to "rx_data[7]" ; ## B12 DP7_M2C_P
set_location_assignment PIN_M30 -to "rx_data[6](n)" ; ## B17 DP6_M2C_N
set_location_assignment PIN_M31 -to "rx_data[6]" ; ## B16 DP6_M2C_P
set_location_assignment PIN_M34 -to "rx_data[5](n)" ; ## A19 DP5_M2C_N
set_location_assignment PIN_M35 -to "rx_data[5]" ; ## A18 DP5_M2C_P
set_location_assignment PIN_N32 -to "rx_data[4](n)" ; ## A15 DP4_M2C_N
set_location_assignment PIN_N33 -to "rx_data[4]" ; ## A14 DP4_M2C_P
set_location_assignment PIN_P30 -to "rx_data[3](n)" ; ## A11 DP3_M2C_N
set_location_assignment PIN_P31 -to "rx_data[3]" ; ## A10 DP3_M2C_P
set_location_assignment PIN_R32 -to "rx_data[1](n)" ; ## A03 DP1_M2C_N
set_location_assignment PIN_R33 -to "rx_data[1]" ; ## A02 DP1_M2C_P
set_location_assignment PIN_N36 -to "tx_data[0](n)" ; ## C03 DP0_C2M_N
set_location_assignment PIN_N37 -to "tx_data[0]" ; ## C02 DP0_C2M_P
set_location_assignment PIN_L36 -to "tx_data[2](n)" ; ## A27 DP2_C2M_N
set_location_assignment PIN_L37 -to "tx_data[2]" ; ## A26 DP2_C2M_P
set_location_assignment PIN_F38 -to "tx_data[7](n)" ; ## B33 DP7_C2M_N
set_location_assignment PIN_F39 -to "tx_data[7]" ; ## B32 DP7_C2M_P
set_location_assignment PIN_G36 -to "tx_data[6](n)" ; ## B37 DP6_C2M_N
set_location_assignment PIN_G37 -to "tx_data[6]" ; ## B36 DP6_C2M_P
set_location_assignment PIN_M38 -to "tx_data[1](n)" ; ## A23 DP1_C2M_N
set_location_assignment PIN_M39 -to "tx_data[1]" ; ## A22 DP1_C2M_P
set_location_assignment PIN_H38 -to "tx_data[5](n)" ; ## A39 DP5_C2M_N
set_location_assignment PIN_H39 -to "tx_data[5]" ; ## A38 DP5_C2M_P
set_location_assignment PIN_J36 -to "tx_data[4](n)" ; ## A35 DP4_C2M_N
set_location_assignment PIN_J37 -to "tx_data[4]" ; ## A34 DP4_C2M_P
set_location_assignment PIN_K38 -to "tx_data[3](n)" ; ## A31 DP3_C2M_N
set_location_assignment PIN_K39 -to "tx_data[3]" ; ## A30 DP3_C2M_P
ad9081_fmca_ebz/a10soc: Make second sync CMOS and GPIO controllable
2022-05-20 14:11:14 +00:00
set_location_assignment PIN_D13 -to "fpga_syncin_0(n)" ; ## H08 LA02_N
set_location_assignment PIN_C13 -to "fpga_syncin_0" ; ## H07 LA02_P
set_location_assignment PIN_D14 -to "fpga_syncin_1_n" ; ## G10 LA03_N
set_location_assignment PIN_C14 -to "fpga_syncin_1_p" ; ## G09 LA03_P
set_location_assignment PIN_E13 -to "fpga_syncout_0(n)" ; ## D09 LA01_CC_N
set_location_assignment PIN_E12 -to "fpga_syncout_0" ; ## D08 LA01_CC_P
set_location_assignment PIN_B10 -to "fpga_syncout_1_n" ; ## C11 LA06_N
set_location_assignment PIN_A10 -to "fpga_syncout_1_p" ; ## C10 LA06_P
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
set_location_assignment PIN_D4 -to "gpio[0]" ; ## H19 LA15_P
set_location_assignment PIN_D5 -to "gpio[1]" ; ## H20 LA15_N
set_location_assignment PIN_G5 -to "gpio[2]" ; ## H22 LA19_P
set_location_assignment PIN_G6 -to "gpio[3]" ; ## H23 LA19_N
set_location_assignment PIN_J11 -to "gpio[4]" ; ## D17 LA13_P
set_location_assignment PIN_K11 -to "gpio[5]" ; ## D18 LA13_N
set_location_assignment PIN_J9 -to "gpio[6]" ; ## C18 LA14_P
set_location_assignment PIN_J10 -to "gpio[7]" ; ## C19 LA14_N
set_location_assignment PIN_D6 -to "gpio[8]" ; ## G18 LA16_P
set_location_assignment PIN_E6 -to "gpio[9]" ; ## G19 LA16_N
set_location_assignment PIN_G4 -to "gpio[10]" ; ## G25 LA22_N
set_location_assignment PIN_D9 -to "hmc_gpio1" ; ## H17 LA11_N
set_location_assignment PIN_B9 -to "hmc_sync" ; ## H14 LA07_N
set_location_assignment PIN_B11 -to "irqb[0]" ; ## G12 LA08_P
set_location_assignment PIN_B12 -to "irqb[1]" ; ## G13 LA08_N
set_location_assignment PIN_A9 -to "rstb" ; ## H13 LA07_P
set_location_assignment PIN_A7 -to "rxen[0]" ; ## C14 LA10_P
set_location_assignment PIN_A8 -to "rxen[1]" ; ## C15 LA10_N
set_location_assignment PIN_F13 -to "spi0_csb" ; ## D11 LA05_P
set_location_assignment PIN_F14 -to "spi0_miso" ; ## D12 LA05_N
set_location_assignment PIN_H12 -to "spi0_mosi" ; ## H10 LA04_P
set_location_assignment PIN_H13 -to "spi0_sclk" ; ## H11 LA04_N
set_location_assignment PIN_M12 -to "spi1_csb" ; ## G15 LA12_P
set_location_assignment PIN_C9 -to "spi1_sclk" ; ## H16 LA11_P
set_location_assignment PIN_N13 -to "spi1_sdio" ; ## G16 LA12_N
set_location_assignment PIN_F5 -to "sysref2(n)" ; ## H05 CLK0_M2C_N
set_location_assignment PIN_E5 -to "sysref2" ; ## H04 CLK0_M2C_P
set_location_assignment PIN_A12 -to "txen[0]" ; ## D14 LA09_P
set_location_assignment PIN_A13 -to "txen[1]" ; ## D15 LA09_N
set_instance_assignment -name XCVR_VCCR_VCCT_VOLTAGE 1_0V -to rx_data
set_instance_assignment -name XCVR_VCCR_VCCT_VOLTAGE 1_0V -to tx_data
set_instance_assignment -name IO_STANDARD LVDS -to fpga_refclk_in
set_instance_assignment -name IO_STANDARD LVDS -to clkin6
set_instance_assignment -name IO_STANDARD "HIGH SPEED DIFFERENTIAL I/O" -to rx_data
set_instance_assignment -name IO_STANDARD "HIGH SPEED DIFFERENTIAL I/O" -to tx_data
set common_lanes 0
set common_lanes [get_env_param RX_JESD_L 4]
if {$common_lanes > [get_env_param TX_JESD_L 4]} {
set common_lanes [get_env_param TX_JESD_L 4]
}
# Merge RX and TX into single transceiver
for {set i 0} {$i < $common_lanes} {incr i} {
set_instance_assignment -name XCVR_RECONFIG_GROUP xcvr_${i} -to rx_data[${i}]
set_instance_assignment -name XCVR_RECONFIG_GROUP xcvr_${i} -to tx_data[${i}]
}
ad9081_fmca_ebz/a10soc: Make second sync CMOS and GPIO controllable
2022-05-20 14:11:14 +00:00
set_instance_assignment -name IO_STANDARD LVDS -to fpga_syncin_0
set_instance_assignment -name IO_STANDARD LVDS -to fpga_syncout_0
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
set_instance_assignment -name IO_STANDARD LVDS -to sysref2
ad9081_fmca_ebz/a10soc: Make second sync CMOS and GPIO controllable
2022-05-20 14:11:14 +00:00
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to fpga_syncin_0
ad9081_fmca_ebz: a10soc: Initial version Parametrizable project with default profile of: M=8 L=4 SampleRate=250 MSPS LaneRate=10 Gbps
2021-01-20 15:58:39 +00:00
set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to sysref2
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc0[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc0[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc1[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc1[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc2[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc2[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc3[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to agc3[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[2]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[3]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[4]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[5]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[6]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[7]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[8]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[9]
set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[10]
set_instance_assignment -name IO_STANDARD "1.8 V" -to hmc_gpio1
set_instance_assignment -name IO_STANDARD "1.8 V" -to hmc_sync
set_instance_assignment -name IO_STANDARD "1.8 V" -to irqb[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to irqb[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to rstb
set_instance_assignment -name IO_STANDARD "1.8 V" -to rxen[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to rxen[1]
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_csb
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_miso
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_mosi
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_sclk
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi1_csb
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi1_sclk
set_instance_assignment -name IO_STANDARD "1.8 V" -to spi1_sdio
set_instance_assignment -name IO_STANDARD "1.8 V" -to txen[0]
set_instance_assignment -name IO_STANDARD "1.8 V" -to txen[1]
# set optimization to get a better timing closure
set_global_assignment -name OPTIMIZATION_MODE "HIGH PERFORMANCE EFFORT"
execute_flow -compile