zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

axi_ad9361 : add non DPA mode support 

For Intel projects:
In cases where the clock of source synchronous interface is not routed
through a clock capable pin the DPA receive mode can't be used. Instead
the clock will be routed through a clock buffer from an IO to the clock
tree and from there to the IOPLL.
main
Laszlo Nagy 2019-08-28 14:10:19 +01:00 committed by Laszlo Nagy
parent 0a34f82c20
commit 00166d86b5
6 changed files with 85 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
library/axi_ad9361/axi_ad9361.v
View File

@ -67,7 +67,8 @@ module axi_ad9361 #(
parameter IO_DELAY_GROUP = "dev_if_delay_group", parameter IO_DELAY_GROUP = "dev_if_delay_group",
parameter MIMO_ENABLE = 0, parameter MIMO_ENABLE = 0,
parameter USE_SSI_CLK = 1, parameter USE_SSI_CLK = 1,
parameter DELAY_REFCLK_FREQUENCY = 200) ( parameter DELAY_REFCLK_FREQUENCY = 200,
parameter RX_NODPA = 0) (
// physical interface (receive-lvds) // physical interface (receive-lvds)
@ -400,7 +401,8 @@ module axi_ad9361 #(
.IO_DELAY_GROUP (IO_DELAY_GROUP), .IO_DELAY_GROUP (IO_DELAY_GROUP),
.CLK_DESKEW (MIMO_ENABLE), .CLK_DESKEW (MIMO_ENABLE),
.USE_SSI_CLK (USE_SSI_CLK), .USE_SSI_CLK (USE_SSI_CLK),
.DELAY_REFCLK_FREQUENCY (DELAY_REFCLK_FREQUENCY)) .DELAY_REFCLK_FREQUENCY (DELAY_REFCLK_FREQUENCY),
.RX_NODPA (RX_NODPA))
i_dev_if ( i_dev_if (
.rx_clk_in_p (rx_clk_in_p), .rx_clk_in_p (rx_clk_in_p),
.rx_clk_in_n (rx_clk_in_n), .rx_clk_in_n (rx_clk_in_n),

16
library/axi_ad9361/axi_ad9361_hw.tcl
View File

@ -70,6 +70,7 @@ ad_ip_parameter DAC_USERPORTS_DISABLE INTEGER 0
ad_ip_parameter DAC_IQCORRECTION_DISABLE INTEGER 0 ad_ip_parameter DAC_IQCORRECTION_DISABLE INTEGER 0
ad_ip_parameter IO_DELAY_GROUP STRING {dev_if_delay_group} ad_ip_parameter IO_DELAY_GROUP STRING {dev_if_delay_group}
ad_ip_parameter MIMO_ENABLE INTEGER 0 ad_ip_parameter MIMO_ENABLE INTEGER 0
ad_ip_parameter RX_NODPA INTEGER 0
adi_add_auto_fpga_spec_params adi_add_auto_fpga_spec_params
@ -178,21 +179,24 @@ proc axi_ad9361_elab {} {
if {$m_fpga_technology == 103} { if {$m_fpga_technology == 103} {
add_hdl_instance axi_ad9361_serdes_clk intel_serdes add_hdl_instance axi_ad9361_serdes_clk intel_serdes
set_instance_parameter_value axi_ad9361_serdes_clk {DEVICE_FAMILY} $m_fpga_technology set_instance_parameter_value axi_ad9361_serdes_clk {DEVICE_FAMILY} {Arria 10}
set_instance_parameter_value axi_ad9361_serdes_clk {MODE} {CLK} set_instance_parameter_value axi_ad9361_serdes_clk {MODE} {CLK}
set_instance_parameter_value axi_ad9361_serdes_clk {DDR_OR_SDR_N} {1} set_instance_parameter_value axi_ad9361_serdes_clk {DDR_OR_SDR_N} {1}
set_instance_parameter_value axi_ad9361_serdes_clk {SERDES_FACTOR} {4} set_instance_parameter_value axi_ad9361_serdes_clk {SERDES_FACTOR} {4}
set_instance_parameter_value axi_ad9361_serdes_clk {CLKIN_FREQUENCY} {250.0} set_instance_parameter_value axi_ad9361_serdes_clk {CLKIN_FREQUENCY} {250.0}
set rx_serdes_mode IN
if {$rx_nodpa == 1} {set rx_serdes_mode IN_NODPA}
add_hdl_instance axi_ad9361_serdes_in intel_serdes add_hdl_instance axi_ad9361_serdes_in intel_serdes
set_instance_parameter_value axi_ad9361_serdes_in {DEVICE_FAMILY} $m_fpga_technology set_instance_parameter_value axi_ad9361_serdes_in {DEVICE_FAMILY} {Arria 10}
set_instance_parameter_value axi_ad9361_serdes_in {MODE} {IN} set_instance_parameter_value axi_ad9361_serdes_in {MODE} $rx_serdes_mode
set_instance_parameter_value axi_ad9361_serdes_in {DDR_OR_SDR_N} {1} set_instance_parameter_value axi_ad9361_serdes_in {DDR_OR_SDR_N} {1}
set_instance_parameter_value axi_ad9361_serdes_in {SERDES_FACTOR} {4} set_instance_parameter_value axi_ad9361_serdes_in {SERDES_FACTOR} {4}
set_instance_parameter_value axi_ad9361_serdes_in {CLKIN_FREQUENCY} {250.0} set_instance_parameter_value axi_ad9361_serdes_in {CLKIN_FREQUENCY} {250.0}
add_hdl_instance axi_ad9361_serdes_out intel_serdes add_hdl_instance axi_ad9361_serdes_out intel_serdes
set_instance_parameter_value axi_ad9361_serdes_out {DEVICE_FAMILY} $m_fpga_technology set_instance_parameter_value axi_ad9361_serdes_out {DEVICE_FAMILY} {Arria 10}
set_instance_parameter_value axi_ad9361_serdes_out {MODE} {OUT} set_instance_parameter_value axi_ad9361_serdes_out {MODE} {OUT}
set_instance_parameter_value axi_ad9361_serdes_out {DDR_OR_SDR_N} {1} set_instance_parameter_value axi_ad9361_serdes_out {DDR_OR_SDR_N} {1}
set_instance_parameter_value axi_ad9361_serdes_out {SERDES_FACTOR} {4} set_instance_parameter_value axi_ad9361_serdes_out {SERDES_FACTOR} {4}
@ -203,6 +207,10 @@ proc axi_ad9361_elab {} {
set_instance_parameter_value axi_ad9361_data_out {PIN_TYPE_GUI} {Output} set_instance_parameter_value axi_ad9361_data_out {PIN_TYPE_GUI} {Output}
set_instance_parameter_value axi_ad9361_data_out {SIZE} {1} set_instance_parameter_value axi_ad9361_data_out {SIZE} {1}
set_instance_parameter_value axi_ad9361_data_out {gui_io_reg_mode} {DDIO} set_instance_parameter_value axi_ad9361_data_out {gui_io_reg_mode} {DDIO}
add_hdl_instance clk_buffer altclkctrl
set_instance_parameter_value clk_buffer {DEVICE_FAMILY} {Arria 10}
} }
add_interface device_if conduit end add_interface device_if conduit end

2
library/axi_ad9361/axi_ad9361_ip.tcl
View File

@ -102,6 +102,8 @@ set_property value "ACTIVE_HIGH" $reset_polarity
ipx::infer_bus_interface gps_pps_irq xilinx.com:signal:interrupt_rtl:1.0 [ipx::current_core] ipx::infer_bus_interface gps_pps_irq xilinx.com:signal:interrupt_rtl:1.0 [ipx::current_core]
ipgui::remove_param -component [ipx::current_core] [ipgui::get_guiparamspec -name "RX_NODPA" -component [ipx::current_core]]
adi_add_auto_fpga_spec_params adi_add_auto_fpga_spec_params
ipx::create_xgui_files [ipx::current_core] ipx::create_xgui_files [ipx::current_core]

7
library/axi_ad9361/intel/axi_ad9361_lvds_if.v
View File

@ -44,7 +44,8 @@ module axi_ad9361_lvds_if #(
// Dummy parameters, required keep the code consistency(used on Xilinx) // Dummy parameters, required keep the code consistency(used on Xilinx)
parameter USE_SSI_CLK = 1, parameter USE_SSI_CLK = 1,
parameter IO_DELAY_GROUP = "dev_if_delay_group", parameter IO_DELAY_GROUP = "dev_if_delay_group",
parameter DELAY_REFCLK_FREQUENCY = 0) ( parameter DELAY_REFCLK_FREQUENCY = 0,
parameter RX_NODPA = 0) (
// physical interface (receive) // physical interface (receive)
@ -528,7 +529,9 @@ endgenerate
generate generate
if (FPGA_TECHNOLOGY == ARRIA10) begin if (FPGA_TECHNOLOGY == ARRIA10) begin
axi_ad9361_lvds_if_10 i_axi_ad9361_lvds_if_10 ( axi_ad9361_lvds_if_10 #(
.RX_NODPA (RX_NODPA))
i_axi_ad9361_lvds_if_10 (
.rx_clk_in_p (rx_clk_in_p), .rx_clk_in_p (rx_clk_in_p),
.rx_clk_in_n (rx_clk_in_n), .rx_clk_in_n (rx_clk_in_n),
.rx_frame_in_p (rx_frame_in_p), .rx_frame_in_p (rx_frame_in_p),

82
library/axi_ad9361/intel/axi_ad9361_lvds_if_10.v
View File

@ -35,7 +35,9 @@
`timescale 1ns/100ps `timescale 1ns/100ps
module axi_ad9361_lvds_if_10 ( module axi_ad9361_lvds_if_10 #(
parameter RX_NODPA = 0) (
// physical interface (receive) // physical interface (receive)
@ -106,6 +108,7 @@ module axi_ad9361_lvds_if_10 (
wire lvds_clk; wire lvds_clk;
wire lvds_loaden; wire lvds_loaden;
wire [ 7:0] lvds_phase; wire [ 7:0] lvds_phase;
wire rx_clk;
// pll reset // pll reset
@ -197,27 +200,62 @@ module axi_ad9361_lvds_if_10 (
genvar i; genvar i;
generate generate
for (i = 0; i < 6; i = i + 1) begin: g_rx_data for (i = 0; i < 6; i = i + 1) begin: g_rx_data
axi_ad9361_serdes_in i_rx_data ( if (RX_NODPA == 0) begin
.data_in_export (rx_data_in_p[i]), axi_ad9361_serdes_in i_rx_data (
.clk_export (lvds_clk), .data_in_export (rx_data_in_p[i]),
.loaden_export (lvds_loaden), .clk_export (lvds_clk),
.div_clk_export (clk), .loaden_export (lvds_loaden),
.hs_phase_export (lvds_phase), .div_clk_export (clk),
.locked_export (rx_data_locked_s[i]), .hs_phase_export (lvds_phase),
.data_s_export (rx_data_s[((i*4)+3):(i*4)]), .locked_export (rx_data_locked_s[i]),
.delay_locked_export (rx_delay_locked_s[i])); .data_s_export (rx_data_s[((i*4)+3):(i*4)]),
end .delay_locked_export (rx_delay_locked_s[i]));
endgenerate end else begin
axi_ad9361_serdes_in i_rx_data (
.data_in_export (rx_data_in_p[i]),
.clk_export (lvds_clk),
.loaden_export (lvds_loaden),
.div_clk_export (clk),
.data_s_export (rx_data_s[((i*4)+3):(i*4)]));
axi_ad9361_serdes_in i_rx_frame ( assign rx_data_locked_s[i] = 1'b1;
.data_in_export (rx_frame_in_p), assign rx_delay_locked_s[i] = 1'b1;
.clk_export (lvds_clk),
.loaden_export (lvds_loaden), end
.div_clk_export (clk), end
.hs_phase_export (lvds_phase),
.locked_export (rx_data_locked_s[6]), if (RX_NODPA == 0) begin
.data_s_export (rx_data_s[27:24]),
.delay_locked_export (rx_delay_locked_s[6])); axi_ad9361_serdes_in i_rx_frame (
.data_in_export (rx_frame_in_p),
.clk_export (lvds_clk),
.loaden_export (lvds_loaden),
.div_clk_export (clk),
.hs_phase_export (lvds_phase),
.locked_export (rx_data_locked_s[6]),
.data_s_export (rx_data_s[27:24]),
.delay_locked_export (rx_delay_locked_s[6]));
assign rx_clk = rx_clk_in_p;
end else begin
axi_ad9361_serdes_in i_rx_frame (
.data_in_export (rx_frame_in_p),
.clk_export (lvds_clk),
.loaden_export (lvds_loaden),
.div_clk_export (clk),
.data_s_export (rx_data_s[27:24]) );
assign rx_data_locked_s[6] = 1'b1;
assign rx_delay_locked_s[6] = 1'b1;
clk_buffer clk_buf (
.inclk (rx_clk_in_p),
.outclk (rx_clk));
end
endgenerate
generate generate
for (i = 0; i < 6; i = i + 1) begin: g_tx_data for (i = 0; i < 6; i = i + 1) begin: g_tx_data
@ -256,7 +294,7 @@ module axi_ad9361_lvds_if_10 (
axi_ad9361_serdes_clk i_clk ( axi_ad9361_serdes_clk i_clk (
.rst_reset (pll_rst), .rst_reset (pll_rst),
.ref_clk_clk (rx_clk_in_p), .ref_clk_clk (rx_clk),
.locked_export (locked_s), .locked_export (locked_s),
.hs_phase_phout (lvds_phase), .hs_phase_phout (lvds_phase),
.hs_clk_lvds_clk (lvds_clk), .hs_clk_lvds_clk (lvds_clk),

3
library/axi_ad9361/xilinx/axi_ad9361_lvds_if.v
View File

@ -42,7 +42,8 @@ module axi_ad9361_lvds_if #(
parameter IO_DELAY_GROUP = "dev_if_delay_group", parameter IO_DELAY_GROUP = "dev_if_delay_group",
parameter CLK_DESKEW = 0, parameter CLK_DESKEW = 0,
parameter USE_SSI_CLK = 1, parameter USE_SSI_CLK = 1,
parameter DELAY_REFCLK_FREQUENCY = 200) ( parameter DELAY_REFCLK_FREQUENCY = 200,
parameter RX_NODPA = 0) (
// physical interface (receive) // physical interface (receive)