Updated the makefiles to build the projects in subdirectories based on the build parameters.

Running 'make' will build the default project directly in the project folder (like it did before)
Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory.
Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory.
Running 'make clean' will clean the default project only.
Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build.
Running 'make clean-all' will delete all the built configurations and libraries.

Note that the 'JESD' and 'LANE' words from the parameter names are stripped.

Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
main
Bogdan Luncan 2022-09-23 10:28:22 +01:00 committed by bluncan
parent 4e8c816d3f
commit 72313df81f
238 changed files with 601 additions and 414 deletions

View File

@ -1,4 +1,3 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
@ -17,9 +16,11 @@ set ADC_SAMPLING_RATE [get_env_param ADC_SAMPLING_RATE 1800000]
source ../common/ad40xx_bd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
set AD40XX_ADAQ400X_N [get_env_param AD40XX_ADAQ400X_N 1]

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
@ -10,9 +9,11 @@ adi_project_files ad4630_fmc_zed [list \
# block design
source ../common/ad463x_bd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
set sys_cstring "sys rom custom string placeholder"
sysid_gen_sys_init_file $sys_cstring

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
@ -18,9 +17,11 @@ adi_project_files ad469x_fmc_zed [list \
source ../common/ad469x_bd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_xilinx.tcl
source ../../scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/vc707/vc707_system_bd.tcl
source ../common/ad6676evb_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source ../common/ad6676evb_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
@ -7,9 +6,11 @@ adi_project_files ad7134_fmc_zed [list \
"$ad_hdl_dir/library/util_cdc/sync_bits.v" \
]
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,8 +1,13 @@
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
source $ad_hdl_dir/projects/common/de10nano/de10nano_system_qsys.tcl
source ../common/ad777x_ardz_qsys.tcl
set_instance_parameter_value sys_spi {clockPolarity} {0}
if [info exists ad_project_dir] {
source ../../common/ad777x_ardz_qsys.tcl
} else {
source ../common/ad777x_ardz_qsys.tcl
}
set_instance_parameter_value sys_spi {clockPolarity} {0}
#system ID
set_instance_parameter_value axi_sysid_0 {ROM_ADDR_BITS} {9}

View File

@ -2,9 +2,11 @@ source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source ../common/ad777x_ardz_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl
@ -48,7 +47,7 @@ source $ad_hdl_dir/projects/common/a10soc/a10soc_system_assign.tcl
# files
set_global_assignment -name VERILOG_FILE ../../../library/common/ad_3w_spi.v
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/library/common/ad_3w_spi.v
# Note: This projects requires a hardware rework to function correctly.

View File

@ -8,7 +8,12 @@ source $ad_hdl_dir/projects/scripts/adi_pd.tcl
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_qsys.tcl
source $ad_hdl_dir/projects/common/intel/dacfifo_qsys.tcl
source $ad_hdl_dir/projects/common/intel/adcfifo_qsys.tcl
source ../common/ad9081_fmca_ebz_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/ad9081_fmca_ebz_qsys.tcl
} else {
source ../common/ad9081_fmca_ebz_qsys.tcl
}
#system ID
set_instance_parameter_value axi_sysid_0 {ROM_ADDR_BITS} {9}

View File

@ -1,4 +1,3 @@
## ADC FIFO depth in samples per converter
set adc_fifo_samples_per_converter [expr $ad_project_params(RX_KS_PER_CHANNEL)*1024]
## DAC FIFO depth in samples per converter
@ -14,9 +13,11 @@ set ADI_PHY_SEL 0
source $ad_hdl_dir/projects/ad9081_fmca_ebz/common/ad9081_fmca_ebz_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
## ADC FIFO depth in samples per converter
set adc_fifo_samples_per_converter [expr $ad_project_params(RX_KS_PER_CHANNEL)*1024]
## DAC FIFO depth in samples per converter
@ -13,9 +12,11 @@ source $ad_hdl_dir/projects/scripts/adi_pd.tcl
ad_ip_parameter axi_mxfe_rx_jesd/rx CONFIG.NUM_INPUT_PIPELINE 2
ad_ip_parameter axi_mxfe_tx_jesd/tx CONFIG.NUM_OUTPUT_PIPELINE 1
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
## ADC FIFO depth in samples per converter
set adc_fifo_samples_per_converter [expr $ad_project_params(RX_KS_PER_CHANNEL)*1024]
## DAC FIFO depth in samples per converter
@ -25,9 +24,11 @@ ad_connect HBM/APB_0_PRESET_N $sys_cpu_resetn
ad_ip_parameter axi_mxfe_rx_jesd/rx CONFIG.NUM_INPUT_PIPELINE 2
ad_ip_parameter axi_mxfe_tx_jesd/tx CONFIG.NUM_OUTPUT_PIPELINE 1
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
## ADC FIFO depth in samples per converter
set adc_fifo_samples_per_converter [expr 32*1024]
## DAC FIFO depth in samples per converter
@ -11,9 +10,11 @@ source $ad_hdl_dir/projects/ad9081_fmca_ebz/common/ad9081_fmca_ebz_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
## ADC FIFO depth in samples per converter
set adc_fifo_samples_per_converter [expr 64*1024]
## DAC FIFO depth in samples per converter
@ -14,9 +13,11 @@ ad_mem_hp0_interconnect $sys_cpu_clk sys_ps8/S_AXI_HP0
source $ad_hdl_dir/projects/ad9081_fmca_ebz/common/ad9081_fmca_ebz_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,3 +1 @@
source $ad_hdl_dir/projects/ad9081_fmca_ebz/vcu118/system_bd.tcl
source $ad_hdl_dir/projects/ad9081_fmca_ebz/vcu118/system_bd.tcl

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,3 +1,2 @@
source $ad_hdl_dir/projects/ad9081_fmca_ebz/zcu102/system_bd.tcl

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl
@ -8,7 +7,7 @@ source $ad_hdl_dir/projects/common/a10soc/a10soc_system_assign.tcl
# files
set_global_assignment -name VERILOG_FILE ../../../library/common/ad_3w_spi.v
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/library/common/ad_3w_spi.v
# lane interface

View File

@ -1,11 +1,15 @@
set adc_fifo_address_width 8
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_qsys.tcl
source $ad_hdl_dir/projects/common/a10soc/a10soc_plddr4_dacfifo_qsys.tcl
source $ad_hdl_dir/projects/common/intel/adcfifo_qsys.tcl
source ../common/ad9083_evb_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/ad9083_evb_qsys.tcl
} else {
source ../common/ad9083_evb_qsys.tcl
}
#system ID
set_instance_parameter_value axi_sysid_0 {ROM_ADDR_BITS} {9}

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zcu102/zcu102_system_bd.tcl
source ../common/ad9083_evb_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
set sys_cstring "RX_NUM_OF_LANES=$RX_NUM_OF_LANES \
RX_NUM_OF_CONVERTERS=$RX_NUM_OF_CONVERTERS \

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
## FIFO depth is 4Mb - 250k samples (65k samples per converter)
set adc_fifo_address_width 13
@ -7,9 +6,11 @@ source $ad_hdl_dir/projects/common/xilinx/adcfifo_bd.tcl
source ../common/dual_ad9208_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl
@ -8,7 +7,7 @@ source $ad_hdl_dir/projects/common/s10soc/s10soc_system_assign.tcl
# verilog file for top instantiations
set_global_assignment -name VERILOG_FILE ../../../library/common/ad_3w_spi.v
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/library/common/ad_3w_spi.v
################################################################################
## FMCB+ location assignments (connector P1 on the FMC board)

View File

@ -3,4 +3,9 @@ set adc_fifo_address_width 15
source $ad_hdl_dir/projects/common/s10soc/s10soc_system_qsys.tcl
source $ad_hdl_dir/projects/common/intel/adcfifo_qsys.tcl
source ../common/ad9213_dual_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/ad9213_dual_qsys.tcl
} else {
source ../common/ad9213_dual_qsys.tcl
}

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source ../common/ad9265_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source ../common/ad9434_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/kc705/kc705_system_bd.tcl
source ../common/ad9467_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source ../common/ad9467_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zcu102/zcu102_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zcu102/zcu102_system_bd.tcl
source ../common/ad9695_fmc_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
set sys_cstring "sys rom custom string placeholder"
sysid_gen_sys_init_file $sys_cstring

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source ../common/ad9739a_fmc_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,6 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zcu102/zcu102_system_bd.tcl
source ../common/ad9783_ebz_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl
@ -8,9 +7,9 @@ source $ad_hdl_dir/projects/common/a10soc/a10soc_system_assign.tcl
# files
set_global_assignment -name VERILOG_FILE ../common/util_tia_chsel.v
set_global_assignment -name VERILOG_FILE ../common/util_axis_syncgen.v
set_global_assignment -name VERILOG_FILE ../../../library/util_cdc/sync_bits.v
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/projects/ad_fmclidar1_ebz/common/util_tia_chsel.v
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/projects/ad_fmclidar1_ebz/common/util_axis_syncgen.v
set_global_assignment -name VERILOG_FILE $ad_hdl_dir/library/util_cdc/sync_bits.v
#
# Note: This project requires a hardware rework to function correctly.

View File

@ -9,7 +9,13 @@ set ADC_RESOLUTION 8 ; # N & NP
set LANE_RATE [expr {($ADC_RESOLUTION * $NUM_OF_CHANNELS *$SAMPLE_RATE_MHZ * 1.25) / $NUM_OF_LANES}]
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_qsys.tcl
source ../common/ad_fmclidar1_ebz_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/ad_fmclidar1_ebz_qsys.tcl
} else {
source ../common/ad_fmclidar1_ebz_qsys.tcl
}
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
#system ID

View File

@ -1,4 +1,3 @@
# Configurable parameters
set SAMPLE_RATE_MHZ 1000.0
@ -36,9 +35,11 @@ ad_ip_parameter sys_ps7 CONFIG.PCW_I2C1_PERIPHERAL_ENABLE 1
ad_connect iic_dac sys_ps7/IIC_1
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
# System ID instance and configuration
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
# Configurable parameters
set SAMPLE_RATE_MHZ 1000.0
@ -38,9 +37,11 @@ ad_cpu_interconnect 0x7c800000 afe_dac_iic
ad_cpu_interrupt ps-12 mb-14 afe_dac_iic/iic2intc_irpt
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
# System ID instance and configuration
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
## ADC FIFO depth in samples per converter
set adc_fifo_samples_per_converter [expr $ad_project_params(RX_KS_PER_CHANNEL)*1024]
## DAC FIFO depth in samples per converter
@ -13,9 +12,11 @@ source $ad_hdl_dir/projects/scripts/adi_pd.tcl
# Set SPI clock to 100/16 = 6.25 MHz
ad_ip_parameter axi_spi CONFIG.C_SCK_RATIO 16
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
set sys_cstring "sys rom custom string placeholder"
sysid_gen_sys_init_file $sys_cstring

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -2,9 +2,11 @@ source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source ../common/adaq8092_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl

View File

@ -1,6 +1,11 @@
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_qsys.tcl
source ../common/adrv9001_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/adrv9001_qsys.tcl
} else {
source ../common/adrv9001_qsys.tcl
}
set_instance_parameter_value sys_spi {clockPolarity} {0}

View File

@ -1,11 +1,12 @@
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source ../common/adrv9001_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
set sys_cstring "CMOS_LVDS_N=${ad_project_params(CMOS_LVDS_N)}"
sysid_gen_sys_init_file $sys_cstring

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,13 +1,14 @@
source $ad_hdl_dir/projects/common/zcu102/zcu102_system_bd.tcl
source ../common/adrv9001_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
ad_ip_parameter axi_adrv9001 CONFIG.USE_RX_CLK_FOR_TX [expr $ad_project_params(CMOS_LVDS_N) == 0]
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
set sys_cstring "CMOS_LVDS_N=${ad_project_params(CMOS_LVDS_N)}"
sysid_gen_sys_init_file $sys_cstring

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
source ../common/adrv9001_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
@ -6,9 +5,11 @@ source $ad_hdl_dir/projects/scripts/adi_pd.tcl
ad_ip_parameter axi_adrv9001 CONFIG.RX_USE_BUFG 1
ad_ip_parameter axi_adrv9001 CONFIG.TX_USE_BUFG 1
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl

View File

@ -1,10 +1,14 @@
set dac_fifo_address_width 10
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
source $ad_hdl_dir/projects/common/a10gx/a10gx_system_qsys.tcl
source $ad_hdl_dir/projects/common/intel/dacfifo_qsys.tcl
source ../common/adrv9009_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/adrv9009_qsys.tcl
} else {
source ../common/adrv9009_qsys.tcl
}
#system ID
set_instance_parameter_value axi_sysid_0 {ROM_ADDR_BITS} {9}

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl

View File

@ -1,10 +1,14 @@
set dac_fifo_address_width 10
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
source $ad_hdl_dir/projects/common/a10soc/a10soc_system_qsys.tcl
source $ad_hdl_dir/projects/common/a10soc/a10soc_plddr4_dacfifo_qsys.tcl
source ../common/adrv9009_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/adrv9009_qsys.tcl
} else {
source ../common/adrv9009_qsys.tcl
}
#system ID
set_instance_parameter_value axi_sysid_0 {ROM_ADDR_BITS} {9}

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source ../../scripts/adi_project_intel.tcl

View File

@ -4,4 +4,9 @@ set xcvr_reconfig_addr_width 11
source $ad_hdl_dir/projects/common/s10soc/s10soc_system_qsys.tcl
source $ad_hdl_dir/projects/common/intel/dacfifo_qsys.tcl
source ../common/adrv9009_qsys.tcl
if [info exists ad_project_dir] {
source ../../common/adrv9009_qsys.tcl
} else {
source ../common/adrv9009_qsys.tcl
}

View File

@ -1,13 +1,14 @@
set dac_fifo_address_width 10
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source $ad_hdl_dir/projects/common/zc706/zc706_plddr3_dacfifo_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,6 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,4 +1,3 @@
## FIFO depth is 18Mb - 1M samples
set dac_fifo_address_width 17
@ -8,9 +7,11 @@ source $ad_hdl_dir/projects/common/zcu102/zcu102_system_bd.tcl
source $ad_hdl_dir/projects/common/xilinx/dacfifo_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source ../common/adrv9009zu11eg_bd.tcl
source ../common/adrv2crr_fmc_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -75,8 +75,10 @@ ad_xcvrpll axi_adrv9009_som_rx_xcvr/up_pll_rst util_adrv9009_som_xcvr/up_cpll_r
ad_xcvrpll axi_adrv9009_som_obs_xcvr/up_pll_rst util_adrv9009_som_xcvr/up_cpll_rst_14
ad_xcvrpll axi_adrv9009_som_obs_xcvr/up_pll_rst util_adrv9009_som_xcvr/up_cpll_rst_15
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl
@ -16,7 +15,7 @@ adi_project_create fmcomms8_adrv9009zu11eg 0 [list \
] "xczu11eg-ffvf1517-2-i"
adi_project_files fmcomms8_adrv9009zu11eg [list \
adi_project_files fmcomms8_adrv9009zu11eg [list \
"system_top.v" \
"fmcomms8_constr.xdc"\
"../common/adrv9009zu11eg_spi.v" \

View File

@ -1,10 +1,11 @@
source ../common/adrv9009zu11eg_bd.tcl
source ../common/adrv2crr_fmc_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

View File

@ -1,4 +1,3 @@
source ../../../scripts/adi_env.tcl
source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl
source $ad_hdl_dir/projects/scripts/adi_board.tcl

View File

@ -1,10 +1,11 @@
source ../common/adrv9009zu11eg_bd.tcl
source ../common/adrv2crr_fmc_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid_gen_sys_init_file

Some files were not shown because too many files have changed in this diff Show More