util_axis_fifo: Add support for tlast

library/util_axis_fifo/util_axis_fifo.v

@@ -45,6 +45,7 @@ module util_axis_fifo #(
   input m_axis_ready,
   output m_axis_valid,
   output [DATA_WIDTH-1:0] m_axis_data,
+  output m_axis_tlast,
   output [ADDRESS_WIDTH-1:0] m_axis_level,
   output m_axis_empty,
 
@@ -53,6 +54,7 @@ module util_axis_fifo #(
   output s_axis_ready,
   input s_axis_valid,
   input [DATA_WIDTH-1:0] s_axis_data,
+  input s_axis_tlast,
   output [ADDRESS_WIDTH-1:0] s_axis_room,
   output s_axis_full
 );
@@ -62,6 +64,7 @@ generate if (ADDRESS_WIDTH == 0) begin : zerodeep /* it's not a real FIFO, just
   if (ASYNC_CLK) begin
 
       (* KEEP = "yes" *) reg [DATA_WIDTH-1:0] cdc_sync_fifo_ram;
+      reg axis_tlast_d;
       reg s_axis_waddr = 1'b0;
       reg m_axis_raddr = 1'b0;
 
@@ -97,6 +100,7 @@ generate if (ADDRESS_WIDTH == 0) begin : zerodeep /* it's not a real FIFO, just
       always @(posedge s_axis_aclk) begin
         if (s_axis_ready == 1'b1 && s_axis_valid == 1'b1)
           cdc_sync_fifo_ram <= s_axis_data;
+          axis_tlast_d <= s_axis_tlast;
       end
 
       always @(posedge s_axis_aclk) begin
@@ -117,6 +121,7 @@ generate if (ADDRESS_WIDTH == 0) begin : zerodeep /* it's not a real FIFO, just
       end
 
       assign m_axis_data = cdc_sync_fifo_ram;
+      assign m_axis_tlast = axis_tlast_d;
 
   end else begin /* !ASYNC_CLK */
 
@@ -124,19 +129,23 @@ generate if (ADDRESS_WIDTH == 0) begin : zerodeep /* it's not a real FIFO, just
     // aspect ratio
     reg [DATA_WIDTH-1:0] axis_data_d;
     reg                  axis_valid_d;
+    reg                  axis_tlast_d;
 
     always @(posedge s_axis_aclk) begin
       if (!s_axis_aresetn) begin
         axis_data_d <= {DATA_WIDTH{1'b0}};
         axis_valid_d <= 1'b0;
+        axis_tlast_d <= 1'b0;
       end else if (s_axis_ready) begin
         axis_data_d <= s_axis_data;
         axis_valid_d <= s_axis_valid;
+        axis_tlast_d <= s_axis_tlast;
       end
     end
 
     assign m_axis_data = axis_data_d;
     assign m_axis_valid = axis_valid_d;
+    assign m_axis_tlast = axis_tlast_d;
     assign s_axis_ready = m_axis_ready | ~m_axis_valid;
     assign m_axis_empty = 1'b0;
     assign m_axis_level = 1'b0;
@@ -199,17 +208,17 @@ end else begin : fifo /* ADDRESS_WIDTH != 0 - this is a real FIFO implementation
     // regardless of the requested size to make sure we threat the
     // clock crossing correctly
     ad_mem #(
-      .DATA_WIDTH (DATA_WIDTH),
+      .DATA_WIDTH (DATA_WIDTH+1),
       .ADDRESS_WIDTH (ADDRESS_WIDTH))
     i_mem (
       .clka(s_axis_aclk),
       .wea(s_mem_write),
       .addra(s_axis_waddr),
-      .dina(s_axis_data),
+      .dina({s_axis_data, s_axis_tlast}),
       .clkb(m_axis_aclk),
       .reb(m_mem_read),
       .addrb(m_axis_raddr),
-      .doutb(m_axis_data)
+      .doutb({m_axis_data, m_axis_tlast})
     );
 
     assign _m_axis_ready = ~valid || m_axis_ready;
@@ -217,18 +226,18 @@ end else begin : fifo /* ADDRESS_WIDTH != 0 - this is a real FIFO implementation
 
   end else begin : sync_clocks /* Synchronous WRITE/READ clocks */
 
-    reg [DATA_WIDTH-1:0] ram[0:2**ADDRESS_WIDTH-1];
+    reg [DATA_WIDTH:0] ram[0:2**ADDRESS_WIDTH-1];
 
     // When the clocks are synchronous use behavioral modeling for the SDP RAM
     // Let the synthesizer decide what to infer (distributed or block RAM)
     always @(posedge s_axis_aclk) begin
       if (s_mem_write)
-        ram[s_axis_waddr] <= s_axis_data;
+        ram[s_axis_waddr] <= {s_axis_data, s_axis_tlast};
     end
 
     if (M_AXIS_REGISTERED == 1) begin
 
-      reg [DATA_WIDTH-1:0] data;
+      reg [DATA_WIDTH:0] data;
 
       always @(posedge m_axis_aclk) begin
         if (m_mem_read)
@@ -236,14 +245,15 @@ end else begin : fifo /* ADDRESS_WIDTH != 0 - this is a real FIFO implementation
       end
 
       assign _m_axis_ready = ~valid || m_axis_ready;
-      assign m_axis_data = data;
+      assign m_axis_data = data[DATA_WIDTH:1];
+      assign m_axis_tlast = data[0];
       assign m_axis_valid = valid;
 
     end else begin
 
       assign _m_axis_ready = m_axis_ready;
       assign m_axis_valid = _m_axis_valid;
-      assign m_axis_data = ram[m_axis_raddr];
+      assign {m_axis_data, m_axis_tlast} = ram[m_axis_raddr];
 
     end
   end