From d300b9c55c6d8a1a2233d46d1b6f42274ecf2e33 Mon Sep 17 00:00:00 2001
From: Laez Barbosa <laez.barbosa@analog.com>
Date: Wed, 17 Jan 2024 07:55:13 -0300
Subject: [PATCH] SPI Engine: Formatting on spi_engine_offload

Signed-off-by: Laez Barbosa <laez.barbosa@analog.com>
---
 .../spi_engine_offload/spi_engine_offload.v   | 36 +++++++++----------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/library/spi_engine/spi_engine_offload/spi_engine_offload.v b/library/spi_engine/spi_engine_offload/spi_engine_offload.v
index b5c5516ba..b1ab7190a 100644
--- a/library/spi_engine/spi_engine_offload/spi_engine_offload.v
+++ b/library/spi_engine/spi_engine_offload/spi_engine_offload.v
@@ -129,7 +129,7 @@ module spi_engine_offload #(
   wire [ 7:0] spi_sync_id_init_s;
 
   always @(posedge ctrl_clk) begin
-    if (ctrl_mem_reset == 1'b1) begin
+    if (ctrl_mem_reset) begin
       ctrl_sync_id_init <= 8'b0;
       ctrl_sync_id_load <= 1'b0;
     end else begin
@@ -163,7 +163,7 @@ module spi_engine_offload #(
     .out_bits(spi_sync_id_init_s));
 
   always @(posedge spi_clk) begin
-    if (spi_resetn == 1'b0) begin
+    if (!spi_resetn) begin
       spi_sync_id_counter <= 8'b0;
     end else begin
       if (spi_sync_id_load_s) begin
@@ -201,9 +201,9 @@ module spi_engine_offload #(
   reg spi_enabled = 1'b0;
 
   always @(posedge ctrl_clk) begin
-    if (ctrl_enable == 1'b1) begin
+    if (ctrl_enable) begin
       ctrl_do_enable <= 1'b1;
-    end else if (ctrl_is_enabled == 1'b1) begin
+    end else if (ctrl_is_enabled) begin
       ctrl_do_enable <= 1'b0;
     end
   end
@@ -260,57 +260,57 @@ module spi_engine_offload #(
   assign trigger_posedge = trigger_s && !trigger_last_reg;
 
   always @(posedge spi_clk) begin
-    if (spi_resetn == 1'b0) begin
+    if (!spi_resetn) begin
       spi_active <= 1'b0;
     end else begin
-      if (spi_active == 1'b0) begin
+      if (!spi_active) begin
         // start offload when we have a valid trigger, offload is enabled and
         // the DMA is enabled
-        if (trigger_posedge == 1'b1 && spi_enable == 1'b1 && offload_sdi_ready == 1'b1)
+        if (trigger_posedge && spi_enable && offload_sdi_ready)
           spi_active <= 1'b1;
-      end else if (cmd_ready == 1'b1 && spi_cmd_rd_addr_next == ctrl_cmd_wr_addr) begin
+      end else if (cmd_ready && (spi_cmd_rd_addr_next == ctrl_cmd_wr_addr)) begin
         spi_active <= 1'b0;
       end
     end
   end
 
   always @(posedge spi_clk) begin
-    if (cmd_valid == 1'b0) begin
+    if (!cmd_valid) begin
       spi_cmd_rd_addr <= 'h00;
-    end else if (cmd_ready == 1'b1) begin
+    end else if (cmd_ready) begin
       spi_cmd_rd_addr <= spi_cmd_rd_addr_next;
     end
   end
 
   always @(posedge spi_clk) begin
-    if (spi_active == 1'b0) begin
+    if (!spi_active) begin
       spi_sdo_rd_addr <= 'h00;
-    end else if (sdo_data_ready == 1'b1) begin
+    end else if (sdo_data_ready) begin
       spi_sdo_rd_addr <= spi_sdo_rd_addr + 1'b1;
     end
   end
 
   always @(posedge ctrl_clk) begin
-    if (ctrl_mem_reset == 1'b1)
+    if (ctrl_mem_reset)
       ctrl_cmd_wr_addr <= 'h00;
-    else if (ctrl_cmd_wr_en == 1'b1)
+    else if (ctrl_cmd_wr_en)
       ctrl_cmd_wr_addr <= ctrl_cmd_wr_addr + 1'b1;
   end
 
   always @(posedge ctrl_clk) begin
-    if (ctrl_cmd_wr_en == 1'b1)
+    if (ctrl_cmd_wr_en)
       cmd_mem[ctrl_cmd_wr_addr] <= ctrl_cmd_wr_data;
   end
 
   always @(posedge ctrl_clk) begin
-    if (ctrl_mem_reset == 1'b1)
+    if (ctrl_mem_reset)
       ctrl_sdo_wr_addr <= 'h00;
-    else if (ctrl_sdo_wr_en == 1'b1)
+    else if (ctrl_sdo_wr_en)
       ctrl_sdo_wr_addr <= ctrl_sdo_wr_addr + 1'b1;
   end
 
   always @(posedge ctrl_clk) begin
-    if (ctrl_sdo_wr_en == 1'b1)
+    if (ctrl_sdo_wr_en)
       sdo_mem[ctrl_sdo_wr_addr] <= ctrl_sdo_wr_data;
   end