library- remove ad_cmos_*

main
Rejeesh Kutty 2017-07-26 10:20:39 -04:00
parent c15db8b74e
commit d4820dd55a
4 changed files with 1 additions and 393 deletions

View File

@ -1,82 +0,0 @@
// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module ad_cmos_clk #(
parameter DEVICE_TYPE = 0) (
input rst,
output locked,
input clk_in,
output clk);
localparam SERIES7 = 0;
localparam VIRTEX6 = 1;
// wires
wire clk_ibuf_s;
// defaults
assign locked = 1'b1;
// instantiations
IBUFG i_rx_clk_ibuf (
.I (clk_in),
.O (clk_ibuf_s));
generate
if (DEVICE_TYPE == VIRTEX6) begin
BUFR #(.BUFR_DIVIDE("BYPASS")) i_clk_rbuf (
.CLR (1'b0),
.CE (1'b1),
.I (clk_ibuf_s),
.O (clk));
end else begin
BUFG i_clk_gbuf (
.I (clk_ibuf_s),
.O (clk));
end
endgenerate
endmodule
// ***************************************************************************
// ***************************************************************************

View File

@ -1,170 +0,0 @@
// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module ad_cmos_in #(
parameter DEVICE_TYPE = 0,
parameter IODELAY_CTRL = 0,
parameter IODELAY_GROUP = "dev_if_delay_group") (
// data interface
input rx_clk,
input rx_data_in,
output rx_data_p,
output reg rx_data_n,
// delay-data interface
input up_clk,
input up_dld,
input [ 4:0] up_dwdata,
output [ 4:0] up_drdata,
// delay-cntrl interface
input delay_clk,
input delay_rst,
output delay_locked);
localparam SERIES7 = 0;
localparam VIRTEX6 = 1;
// internal registers
// internal signals
wire rx_data_n_s;
wire rx_data_ibuf_s;
wire rx_data_idelay_s;
// delay controller
generate
if (IODELAY_CTRL == 1) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IDELAYCTRL i_delay_ctrl (
.RST (delay_rst),
.REFCLK (delay_clk),
.RDY (delay_locked));
end else begin
assign delay_locked = 1'b1;
end
endgenerate
// receive data interface, ibuf -> idelay -> iddr
IBUF i_rx_data_ibuf (
.I (rx_data_in),
.O (rx_data_ibuf_s));
generate
if (DEVICE_TYPE == VIRTEX6) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IODELAYE1 #(
.CINVCTRL_SEL ("FALSE"),
.DELAY_SRC ("I"),
.HIGH_PERFORMANCE_MODE ("TRUE"),
.IDELAY_TYPE ("VAR_LOADABLE"),
.IDELAY_VALUE (0),
.ODELAY_TYPE ("FIXED"),
.ODELAY_VALUE (0),
.REFCLK_FREQUENCY (200.0),
.SIGNAL_PATTERN ("DATA"))
i_rx_data_idelay (
.T (1'b1),
.CE (1'b0),
.INC (1'b0),
.CLKIN (1'b0),
.DATAIN (1'b0),
.ODATAIN (1'b0),
.CINVCTRL (1'b0),
.C (up_clk),
.IDATAIN (rx_data_ibuf_s),
.DATAOUT (rx_data_idelay_s),
.RST (up_dld),
.CNTVALUEIN (up_dwdata),
.CNTVALUEOUT (up_drdata));
end else begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IDELAYE2 #(
.CINVCTRL_SEL ("FALSE"),
.DELAY_SRC ("IDATAIN"),
.HIGH_PERFORMANCE_MODE ("FALSE"),
.IDELAY_TYPE ("VAR_LOAD"),
.IDELAY_VALUE (0),
.REFCLK_FREQUENCY (200.0),
.PIPE_SEL ("FALSE"),
.SIGNAL_PATTERN ("DATA"))
i_rx_data_idelay (
.CE (1'b0),
.INC (1'b0),
.DATAIN (1'b0),
.LDPIPEEN (1'b0),
.CINVCTRL (1'b0),
.REGRST (1'b0),
.C (up_clk),
.IDATAIN (rx_data_ibuf_s),
.DATAOUT (rx_data_idelay_s),
.LD (up_dld),
.CNTVALUEIN (up_dwdata),
.CNTVALUEOUT (up_drdata));
end
endgenerate
IDDR #(
.DDR_CLK_EDGE ("SAME_EDGE_PIPELINED"),
.INIT_Q1 (1'b0),
.INIT_Q2 (1'b0),
.SRTYPE ("ASYNC"))
i_rx_data_iddr (
.CE (1'b1),
.R (1'b0),
.S (1'b0),
.C (rx_clk),
.D (rx_data_idelay_s),
.Q1 (rx_data_p),
.Q2 (rx_data_n_s));
always @(posedge rx_clk) begin
rx_data_n <= rx_data_n_s;
end
endmodule
// ***************************************************************************
// ***************************************************************************

View File

@ -1,140 +0,0 @@
// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module ad_cmos_out #(
parameter DEVICE_TYPE = 0,
parameter IODELAY_ENABLE = 0,
parameter IODELAY_CTRL = 0,
parameter IODELAY_GROUP = "dev_if_delay_group") (
// data interface
input tx_clk,
input tx_data_p,
input tx_data_n,
output tx_data_out,
// delay-data interface
input up_clk,
input up_dld,
input [ 4:0] up_dwdata,
output [ 4:0] up_drdata,
// delay-cntrl interface
input delay_clk,
input delay_rst,
output delay_locked);
localparam SERIES7 = 0;
localparam VIRTEX6 = 1;
// internal signals
wire tx_data_oddr_s;
wire tx_data_odelay_s;
// delay controller
generate
if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == SERIES7) && (IODELAY_CTRL == 1)) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
IDELAYCTRL i_delay_ctrl (
.RST (delay_rst),
.REFCLK (delay_clk),
.RDY (delay_locked));
end else begin
assign delay_locked = 1'b1;
end
endgenerate
// transmit data interface, oddr -> odelay -> obuf
ODDR #(
.DDR_CLK_EDGE ("SAME_EDGE"),
.INIT (1'b0),
.SRTYPE ("ASYNC"))
i_tx_data_oddr (
.CE (1'b1),
.R (1'b0),
.S (1'b0),
.C (tx_clk),
.D1 (tx_data_p),
.D2 (tx_data_n),
.Q (tx_data_oddr_s));
generate
if ((IODELAY_ENABLE == 1) && (DEVICE_TYPE == SERIES7)) begin
(* IODELAY_GROUP = IODELAY_GROUP *)
ODELAYE2 #(
.CINVCTRL_SEL ("FALSE"),
.DELAY_SRC ("ODATAIN"),
.HIGH_PERFORMANCE_MODE ("FALSE"),
.ODELAY_TYPE ("VAR_LOAD"),
.ODELAY_VALUE (0),
.REFCLK_FREQUENCY (200.0),
.PIPE_SEL ("FALSE"),
.SIGNAL_PATTERN ("DATA"))
i_tx_data_odelay (
.CE (1'b0),
.CLKIN (1'b0),
.INC (1'b0),
.LDPIPEEN (1'b0),
.CINVCTRL (1'b0),
.REGRST (1'b0),
.C (up_clk),
.ODATAIN (tx_data_oddr_s),
.DATAOUT (tx_data_odelay_s),
.LD (up_dld),
.CNTVALUEIN (up_dwdata),
.CNTVALUEOUT (up_drdata));
end else begin
assign up_drdata = 5'd0;
assign tx_data_odelay_s = tx_data_oddr_s;
end
endgenerate
OBUF i_tx_data_obuf (
.I (tx_data_odelay_s),
.O (tx_data_out));
endmodule
// ***************************************************************************
// ***************************************************************************

View File

@ -16,7 +16,7 @@ M_DEPS += ../../scripts/adi_board.tcl
M_DEPS += ../../common/zed/zed_system_constr.xdc M_DEPS += ../../common/zed/zed_system_constr.xdc
M_DEPS += ../../common/zed/zed_system_bd.tcl M_DEPS += ../../common/zed/zed_system_bd.tcl
M_DEPS += ../../../library/xilinx/common/ad_iobuf.v M_DEPS += ../../../library/xilinx/common/ad_iobuf.v
M_DEPS += ../../../library/xilinx/common/ad_cmos_clk.v M_DEPS += ../../../library/xilinx/common/ad_data_clk.v
M_DEPS += ../../../library/axi_clkgen/axi_clkgen.xpr M_DEPS += ../../../library/axi_clkgen/axi_clkgen.xpr
M_DEPS += ../../../library/axi_dmac/axi_dmac.xpr M_DEPS += ../../../library/axi_dmac/axi_dmac.xpr
M_DEPS += ../../../library/axi_hdmi_tx/axi_hdmi_tx.xpr M_DEPS += ../../../library/axi_hdmi_tx/axi_hdmi_tx.xpr