cn0363: Microzed, updated system_top to remove part of the Warnings

projects/cn0363/microzed/system_top.v

@@ -1,9 +1,9 @@
 // ***************************************************************************
 // ***************************************************************************
 // Copyright 2011(c) Analog Devices, Inc.
-// 
+//
 // All rights reserved.
-// 
+//
 // Redistribution and use in source and binary forms, with or without modification,
 // are permitted provided that the following conditions are met:
 //     - Redistributions of source code must retain the above copyright
@@ -21,16 +21,16 @@
 //       patent holders to use this software.
 //     - Use of the software either in source or binary form, must be run
 //       on or directly connected to an Analog Devices Inc. component.
-//    
+//
 // THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
 // INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
 // PARTICULAR PURPOSE ARE DISCLAIMED.
 //
 // IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 // EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
-// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
+// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 // BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 
+// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 // THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 // ***************************************************************************
 // ***************************************************************************
@@ -70,7 +70,7 @@ module system_top (
   led_clk_o,
   gain0_o,
   gain1_o,
-  
+
   otg_vbusoc);
 
   inout   [14:0]  ddr_addr;
@@ -119,8 +119,9 @@ module system_top (
 
   assign gain0_o = gpio_o[32];
   assign gain1_o = gpio_o[33];
-  
+
   assign gpio_i[34] = spi_sdi; // Interrupt
+  assign gpio_i[33:0] = gpio_o[33:0];
   assign led_clk_o = excitation;
 
   ad_iobuf #(
@@ -128,6 +129,7 @@ module system_top (
   ) i_sdo_iobuf (
     .dio_t(spi_sdo_t),
     .dio_i(spi_sdo_o),
+    .dio_o(),
     .dio_p(spi_sdo)
   );
 
@@ -166,7 +168,28 @@ module system_top (
     .ps_intr_07 (1'b0),
     .ps_intr_08 (1'b0),
     .ps_intr_09 (1'b0),
+    .ps_intr_11 (1'b0),
+    .ps_intr_14 (1'b0),
+    .ps_intr_15 (1'b0),
     .ps_intr_10 (1'b0),
+    .spi0_clk_i (1'b0),
+    .spi0_clk_o (),
+    .spi0_csn_0_o (),
+    .spi0_csn_1_o (),
+    .spi0_csn_2_o (),
+    .spi0_csn_i (1'b1),
+    .spi0_sdi_i (),
+    .spi0_sdo_i (1'b0),
+    .spi0_sdo_o (),
+    .spi1_clk_i (1'b0),
+    .spi1_clk_o (),
+    .spi1_csn_0_o (),
+    .spi1_csn_1_o (),
+    .spi1_csn_2_o (),
+    .spi1_csn_i (1'b1),
+    .spi1_sdi_i (1'b0),
+    .spi1_sdo_i (1'b0),
+    .spi1_sdo_o (),
     .spi_sdo (spi_sdo_o),
     .spi_sdo_t (spi_sdo_t),
     .spi_sdi (spi_sdi),