AndreiGrozav
|
01165c926c
|
ad6676evb: Set default xcvr parameters to common design
|
2017-04-18 11:26:51 +03:00 |
Istvan Csomortani
|
ee398b4703
|
spi_engine: Fix CMD_FIFO_VALID generation
Because of the memory map interface mux, up_waddr_s and up_wreq_s should be
used, when cmd_fifo_in_valid is generated.
|
2017-04-12 14:43:00 +02:00 |
Adrian Costina
|
7c191a089f
|
fmcjesdadc1: Update xcvr configuration to the default one used for this board
|
2017-04-12 14:41:43 +03:00 |
Adrian Costina
|
75409eeb38
|
util_fir_int: Shifted data so that the amplitude at the output of the filter is the same with the input
|
2017-04-12 13:49:53 +03:00 |
Adrian Costina
|
096aadbf91
|
util_fir_dec: Changed output rounding mode to Symmetric rounding to Zero
This removes the added DC component that was introduced by the previous rounding mode
|
2017-04-12 13:49:37 +03:00 |
Istvan Csomortani
|
f7190dbbfd
|
adxcvr: Update Makefiles
|
2017-04-03 12:38:40 +03:00 |
Istvan Csomortani
|
fa5f81f6c6
|
axi_dacfifo: Fix clock for read address generation
|
2017-04-03 10:39:17 +03:00 |
Istvan Csomortani
|
7cb7bc111e
|
axi_dacfifo: Delete unused wires
|
2017-04-03 10:38:50 +03:00 |
Istvan Csomortani
|
14b4c4cf5f
|
axi_dacfifo: Define constraint for bypass
The bypass module currently is supported, when the DMA data width
is equal with the DAC data width.
The dac_data output is enabled with dac_valid.
|
2017-04-03 10:38:28 +03:00 |
Istvan Csomortani
|
06605ed1e1
|
axi_dacfifo: Register the dac_valid signals
|
2017-04-03 10:38:09 +03:00 |
Istvan Csomortani
|
77081a6233
|
axi_dacfifo: Data from DMA is validated with dma_ready too
|
2017-04-03 10:37:45 +03:00 |
Istvan Csomortani
|
af3a4f5fc9
|
axi_dacfifo: axi_dvalid should come from dacfifo_rd module
|
2017-04-03 10:37:30 +03:00 |
Istvan Csomortani
|
b30041f7f3
|
axi_dacfifo: Redesign the bypass functionality
|
2017-04-03 10:37:08 +03:00 |
Istvan Csomortani
|
434d1ea52c
|
axi_dacfifo: Fix constraints
|
2017-04-03 10:36:46 +03:00 |
Istvan Csomortani
|
4bda798f13
|
Merge branch 'dev' into hdl_2016_r2
Update the release branch with all the recent fixes.
|
2017-02-21 10:56:52 +02:00 |
Adrian Costina
|
040b61de60
|
fmcadc5: Updated default parameters
|
2017-02-20 17:13:58 +02:00 |
Rejeesh Kutty
|
a15e05c497
|
adcfifo- remove axi-byte-width parameter
|
2017-02-17 15:29:10 -05:00 |
Rejeesh Kutty
|
cb3d1883bc
|
fmcjesdadc1/a5gt- hard placement of ddr hr/qr registers
|
2017-02-17 15:21:33 -05:00 |
Istvan Csomortani
|
981a61bf16
|
axi_dacfifo: Clean up the axi_dacfifo_wr.v module
|
2017-02-17 18:40:02 +02:00 |
Adrian Costina
|
3e5054247b
|
scripts: For altera projects, when it doesn't meet timing rename the generated sof
|
2017-02-17 11:08:50 +02:00 |
Adrian Costina
|
e8bcbb74da
|
scripts: fixed tcl syntax for altera projects not meeting timing
|
2017-02-16 21:21:51 +02:00 |
Istvan Csomortani
|
f10866e4c3
|
axi_*fifo: Delete/replace AXI_BYTE_WIDTH parameter
|
2017-02-16 19:54:41 +02:00 |
Istvan Csomortani
|
95a4ea20c8
|
axi_dacfifo: Delete redundant parameter BYPASS_EN
|
2017-02-16 19:53:44 +02:00 |
Adrian Costina
|
8453d758c2
|
scripts: If an altera project doesn't meet timing, rename the sof
|
2017-02-16 19:20:49 +02:00 |
Istvan Csomortani
|
343d0472d4
|
fmcadc2: Move GT setting to common/system_bd.tcl
|
2017-02-16 14:56:25 +02:00 |
Istvan Csomortani
|
07184b31d2
|
fmcadc2: Define default clock selection for Xilinx GTs
|
2017-02-16 12:35:24 +02:00 |
Adrian Costina
|
358aa48c76
|
axi_adc_decimate: Fix assignment width
|
2017-02-15 11:38:43 +02:00 |
Adrian Costina
|
86c279c238
|
pzsdr1: ccbox, moved I2S core to DMA0 and DMA1 to fix critical warnings
|
2017-02-14 14:51:49 +02:00 |
Adrian Costina
|
46290193f3
|
pzsdr2: ccusb, renamed clk_out to clkout_in
|
2017-02-14 11:58:11 +02:00 |
Adrian Costina
|
27119343f2
|
pzsdr2: ccusb, connect unused clock pins to GND
|
2017-02-14 11:56:54 +02:00 |
Adrian Costina
|
fa37f4dd0a
|
pzsdr2: Don't set a disabled parameter
|
2017-02-14 11:56:08 +02:00 |
Adrian Costina
|
6a9b7580de
|
pzsdr1: ccusb, renamed clk_out to clkout_in
|
2017-02-14 11:54:46 +02:00 |
Adrian Costina
|
acef0113d1
|
pzsdr1: ccusb, connect unused clock pins to GND
|
2017-02-14 11:50:37 +02:00 |
Adrian Costina
|
46883731eb
|
pzsdr1: Don't set a disabled parameter
|
2017-02-14 11:50:06 +02:00 |
Adrian Costina
|
c6ee76421b
|
axi_usb_fx3: Fixed clock domain association
|
2017-02-14 11:48:07 +02:00 |
Adrian Costina
|
a569b6bf0c
|
pluto: Interpolation, connect fifo_rd_valid to s_axis_data_tvalid
|
2017-02-13 18:08:52 +02:00 |
Adrian Costina
|
7c86b038ef
|
util_fir_int: manually request data at 1/8 clock frequency
|
2017-02-13 18:05:59 +02:00 |
Adrian Costina
|
e215a091b2
|
m2k: standalone, added explicit fclk_clk0 and fclk_clk1 constraints
|
2017-02-13 12:02:59 +02:00 |
Adrian Costina
|
4e62fb0ef3
|
m2k: Add reset circuitry on the logic_analyzer clock domain
|
2017-02-13 12:02:11 +02:00 |
Istvan Csomortani
|
5fa6dba333
|
Make: Update Makefiles
|
2017-02-10 16:32:58 +02:00 |
Istvan Csomortani
|
f5f1f47691
|
ad9467_fmc: Delete asynchronous clock group definition
This is a very bad way to handle timing. All the false path
should be defined explicitly, rather than define asynchronous clock
domains.
|
2017-02-10 16:21:35 +02:00 |
Istvan Csomortani
|
0dae754f2d
|
axi_adxcvr: Add rparam register to Altera XCVR
|
2017-02-10 16:19:17 +02:00 |
Istvan Csomortani
|
24daffcf5c
|
spi_engine: Set up default driver value for input ports
|
2017-02-07 12:30:46 +02:00 |
Istvan Csomortani
|
47db0d80fe
|
axi_ad7616: Set up default driver value for input ports
|
2017-02-07 12:29:21 +02:00 |
Rejeesh Kutty
|
c39ed08edd
|
zcu102/*- actual clock == desired clock
|
2017-02-06 12:53:47 -05:00 |
Rejeesh Kutty
|
58872aa3ef
|
fmcomms2/zc706pr- prcfg is a single clock synchronous design
|
2017-02-06 10:59:18 -05:00 |
AndreiGrozav
|
971bcbb0fc
|
fmcomms1: Remove project
|
2017-02-03 16:42:44 +02:00 |
Rejeesh Kutty
|
096274a033
|
daq2/zcu102- fix refclock pin swap
|
2017-02-03 09:26:07 -05:00 |
Rejeesh Kutty
|
7c363cd5a7
|
daq3/a10gx/system_constr.sdc- fix typo
|
2017-02-03 09:26:07 -05:00 |
Rejeesh Kutty
|
35f660fe06
|
fmcjesdadc1/vc707- constraint clean-up
|
2017-02-02 15:05:49 -05:00 |