012b095006
daq3: Updated common design to 2015.4
2016-03-17 11:44:27 +02:00
38c3f7474a
ad6676: Updated common design to 2015.4
2016-03-17 11:40:46 +02:00
abc03fff2c
fmcomms7: Updated design to 2015.4
2016-03-17 09:11:41 +02:00
59c726ecbe
fmcjesdadc1: Updated common design to 2015.4
2016-03-16 10:14:06 +02:00
1a3aab0c13
fmcomms1: Updated common design to 2015.4
2016-03-16 10:09:54 +02:00
b7be089b82
daq2: Updated common design to 2015.4
2016-03-16 10:02:42 +02:00
334fce03a3
fmcadc4/zc706: Updated design to 2015.4
2016-03-15 15:28:11 +02:00
e8dd5f9788
fmcadc4: Updated common design to 2015.4
2016-03-15 15:27:25 +02:00
98cc7dad7d
fmcadc2: Updated common design to 2015.4
2016-03-15 15:26:05 +02:00
ceea7f25b2
fmcomms2: Updated common design to 2015.4
2016-03-15 15:23:20 +02:00
6f03998b95
zc702: Updated common design to 2015.4
2016-03-15 15:21:22 +02:00
a0c5f46940
zed: Updated common design to 2015.4
2016-03-15 15:20:46 +02:00
9a258d5e4c
vc707: Updated common design to 2015.4
2016-03-15 15:20:02 +02:00
bcf5bd8137
mitx045: Updated common design to 2015.4
2016-03-15 15:18:31 +02:00
27f5f1dcbe
kc705: Updated common design to 2015.4
2016-03-15 15:17:53 +02:00
eb743e0e03
ac701: Updated common design to 2015.4
2016-03-15 15:17:02 +02:00
d282064103
zc706: Updated common design to 2015.4
2016-03-15 15:16:36 +02:00
71be9519ec
adi_project.tcl: Updated to 2015.4
2016-03-15 15:03:50 +02:00
9b2a106aa0
axi_jesd_gt: changed clock and reset naming to be consistent with the other projects
2016-03-15 11:20:31 +02:00
06b7916303
axi_spdif_tx: changed adi_ip_properties_lite to adi_ip_properties, so that the axi interface can be inferred
2016-03-15 10:18:25 +02:00
ef05642e26
axi_spdif_rx: changed adi_ip_properties_lite to adi_ip_properties, so that the axi interface can be inferred
2016-03-15 10:14:05 +02:00
b3ed38107c
axi_i2s_adi: changed adi_ip_properties lite to adi_ip_properties, so that the axi interface can be inferred
2016-03-15 10:12:45 +02:00
31cc91d1b9
adi_ip: Updated to 2014.4.2
...
- automatically infer clocks, resets, axim_mm and axis interfaces
2016-03-14 15:14:18 +02:00
2524f19ae0
Updated interfaces Makefile and Makefiles for the libraries that depend on it
2016-03-07 12:31:41 +02:00
40fb68dfd5
ad9265, ad9434, ad9467, daq1, daq2, daq3, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1, fmcomms6, fmcomms7, usdrx1: updated common spi module so that spi streaming is possible
2016-03-02 13:39:37 +02:00
becc23a69b
daq2: Modified common spi module so that spi streaming is possible
...
- stop incrementing spi_count after the instruction cycle
2016-03-01 17:25:58 +02:00
f6e64e42b0
kcu105: add ethernet idelaycntrl
2016-02-26 13:19:49 -05:00
8ccd8d87bb
daq2: A10GX, increase analog/digital reset durations
...
- reset the xcvr_rst_cntrl only from the axi_jesd_xcvr
- checked separate RX/TX reset per channel
2016-02-23 11:41:38 +02:00
89f7aadfb1
fmcjesdadc1: A5GT, connected xcvr_rxt_cntrl reset input to the axi_jesd_xcvr reset output
...
This will allow for the transceivers to be reset by the axi_jesd_xcvr core
2016-02-23 11:31:07 +02:00
0f37dd6424
fmcjesdadc1: Fixed project
...
- changed system_project.tcl so that all base designs to be included
- changed DMA properties to take into consideration the new parameter names
- changed reset bridges to asynchronous
- increased maximum burst size of the DMA bridge
- changed the data_width of the memory bus to 256, as with 512 timing violations may occur
- changed base addresses for the base system to be the same as in the previous release
2016-02-19 14:09:57 +02:00
d94f157454
arradio: Changed ADC/DAC DMA address length to 24 bit
2016-02-16 15:27:51 +02:00
43e03ca6f7
arradio: Updated project
...
- made the reset bridges asynchronous
- connected the arradio gpio to the CPU interconnect
2016-02-16 14:50:23 +02:00
61f9f72a75
fmcjesdadc1: Updated VC707 project for maximum throughput from DMA to DDR
...
- Increased the DMAs internal FIFO
2016-02-09 12:30:56 +02:00
c431adb793
fmcjesdadc1: Updated KC705 project for maximum throughput from DMA to DDR
...
- Increased the DMA internal FIFO
2016-02-09 12:00:27 +02:00
ad9ecbbbb6
daq2: Updated a10gx project to quartus 15.1.1
2016-02-05 17:43:05 +02:00
0d67af370f
util_upack: Fixed problem when dac valid isn't continuous from the DAC
...
In cases when the dac_valid_ from the DAC is not continuous, in some situations
there were two dac_valid pulses sent to the DMA.
2016-02-04 13:03:46 +02:00
e22d5d5c18
daq2: Fix clock constraints for KC705 and VC707
2016-01-22 19:09:57 +02:00
59fbd99fdb
fmcjesdadc1: Added clock constraint for the ADC path
2016-01-22 15:46:20 +02:00
dca39c26f9
ad6676evb: Added clock constraint for the ADC path
2016-01-22 15:45:16 +02:00
9cd0378003
fmcadc2: Added clock constraint for the ADC path
2016-01-22 15:44:04 +02:00
7013b319b0
motcon2_fmc: Fixed reset connection for cpack cores
2015-12-22 12:03:34 +02:00
34b832e22a
fmcomms6: Fixed reset connection for cpack core
2015-12-16 10:36:33 +02:00
35f6bd16e9
fmcomms5: Fixed reset connection for cpack core
2015-12-16 10:34:36 +02:00
6e549171f0
fmcomms5: Connected the clk input of the ad9361 to l_clk
2015-12-02 14:43:44 +02:00
2309c4d83c
Makefiles: Removed " from path
2015-11-27 14:02:46 +02:00
159f6c1216
Makefiles: Updated Makefiles
...
- for altera projects, taken into consideration of the new location for common qsys files
- for fmcomms5, added wfifo dependency
- for daq3, added mfifo dependency
2015-11-27 12:39:42 +02:00
36febf8591
Merge branch 'master' into dev
...
Conflicts:
library/axi_ad9361/axi_ad9361_ip.tcl
library/axi_dmac/Makefile
library/axi_dmac/axi_dmac_constr.ttcl
library/axi_dmac/axi_dmac_ip.tcl
library/common/ad_tdd_control.v
projects/daq2/common/daq2_bd.tcl
projects/fmcjesdadc1/common/fmcjesdadc1_bd.tcl
projects/fmcomms2/zc706pr/system_project.tcl
projects/fmcomms2/zc706pr/system_top.v
projects/usdrx1/common/usdrx1_bd.tcl
This merge was made, to recover any forgotten fixes from master,
before creating the new release branch. All conflicts were reviewed
and resolved.
2015-11-26 13:38:11 +02:00
667e49fe41
library: Axi_clkgen, added register for controlling the source clock.
...
Address is 0x11 /0x44.
With the default value, 0, clock 1 is selected. If set to 1, clock 2 is selected
2015-11-25 11:16:32 +02:00
ea57b3c03c
daq2: A10GX, add project specific IP search paths
2015-11-25 10:58:36 +02:00
df58646925
util_adcfifo: Updated altera interface
2015-11-25 10:20:06 +02:00
AndreiGrozav
Adrian Costina
Rejeesh Kutty
Istvan Csomortani