d41945f568
altera/ad_serdes: Add support for any SERDES factor less than 8
2016-10-11 17:59:14 +03:00
52194f0fea
axi_ad9361: Add DRP connection to the interface module
2016-10-11 17:59:12 +03:00
7194d2eccc
axi_ad9361: Grup interfaces to add support for more carriers
2016-10-11 17:58:49 +03:00
5bb77109ca
daq2/a10gx- make fix
2016-10-10 13:03:44 -04:00
905e29eb01
hdlmake- altera
2016-10-10 12:55:55 -04:00
e5cf417576
daq2/mb- xcvr procedures
2016-10-10 12:51:30 -04:00
273073a584
daq2/kcu105- xcvr procedure
2016-10-10 11:12:47 -04:00
cc6ca4f0f2
ad_lvds_in- ultrascale sim device
2016-10-10 10:39:47 -04:00
b3d3876dc5
imageon: ZC706, updated system_top to remove part of the Warnings.
...
- constraints fixed so Vivado doesn't issue a Warning
2016-10-10 17:33:42 +03:00
9efc45f0b6
imageon: Zed, updated system_top to remove part of the Warnings.
...
- spi csn signals should be tied to 1 if spi is not used
- constraints fixed so Vivado doesn't issue a Warning
2016-10-10 17:31:25 +03:00
121b341b45
axi_spdif_rx: Fixed version register issue. Added sampled_data to sensitivity list
2016-10-10 17:30:13 +03:00
8875c5bef3
fmcomms6: ZC706, updated system_top to remove part of the Warnings
2016-10-10 16:43:23 +03:00
ff980551e6
ad_serdes: SERDES_FACTOR handover missing
...
In modules ad_serdes_in/ad_serdes_out the handover of the parameter
SERDES_FACTOR did not exist, causing unwanted behavioral in case of
factors less than 8.
SERDES_FACTOR must be hand over to DATA_WIDTH parameter of the SERDES
primitive.
2016-10-10 16:38:42 +03:00
f34aa67029
axi_hdmi: Fix a typo
2016-10-10 16:22:18 +03:00
fcd56a2f90
daq3/a10gx: Update project to the new GT framework
...
- Update common script
- Update system_top, some port names were changed
- Update constraint files
2016-10-10 16:22:08 +03:00
15f36af4c2
axi_ad9152: Update core to support Altera platforms
2016-10-10 16:21:49 +03:00
94f55f20e9
adv7511: KCU105, updated system_top to remove part of the Warnings
2016-10-10 16:12:17 +03:00
f464497062
cn0363: Microzed, updated system_top to remove part of the Warnings
2016-10-10 16:08:59 +03:00
2e605fc060
cn0363: Zed, update system_top to remove part of the Warnings
2016-10-10 15:56:46 +03:00
a12d34a98b
adv7511: Zed, updated system_top to remove part of the Warnings
2016-10-10 15:54:34 +03:00
c737afebf8
adv7511: KC705, updated system_top to remove part of the Warnings
2016-10-10 13:24:40 +03:00
74faac9210
ad9467_fmc: KC705, updated system_top to remove part of the Warnings
2016-10-10 13:19:55 +03:00
111adac825
axi_usb_fx3: Updated core
...
- trig signal will reset state machine
- slrd_n delay will be absorbed by the axi_usb_fx3_if module, when Xilinx DMA is not ready to receive data during a packet
- fx32dma_eop signals when the FX3 DMA buffer should be empty. slrd_n set high and sloe_n set low for another two clock cycles
- eot_fx32dma signals the interface that the packet has been fully transfered. No need for watermark signals
- added length_fx32dma and length_dma2fx3 as requested
2016-10-10 10:33:37 +03:00
ffaf78665f
daq2- xcvr procedures
2016-10-06 14:44:20 -04:00
3b55822db3
daq2- xcvr connect
2016-10-06 14:09:27 -04:00
721ee98a06
zcu102- misc fixes
2016-10-06 10:18:14 -04:00
8965bcffb7
make: Update make files for DAQ3
2016-10-06 10:27:00 +03:00
9ace02a227
daq3/a10gx: Update project to the new GT framework
2016-10-06 10:25:25 +03:00
58c4abd8af
daq3/kcu105: Update project to the new GT framework
2016-10-06 10:23:52 +03:00
ca4dca87e2
daq2- updates
2016-10-05 14:02:59 -04:00
baabe20766
common/zcu102- spi connections & clock
2016-10-05 14:01:59 -04:00
39fdf11ef3
util_adxcvr- rx/tx clocks
2016-10-05 13:53:02 -04:00
7ec93ce8e0
util_adxcvr: Fix some typo
...
GTHE4_CHANNEL is instantiated in case of XCVR_TYPE == 2
2016-10-05 17:42:12 +03:00
4f587d2e48
util_adxcvr: Delete trailing whitespaces
2016-10-05 17:41:40 +03:00
bab9b2df0b
daq3/zc706: Update project with the new transceiver modules
2016-10-05 17:41:25 +03:00
1b9d2d434c
axi_ad9361_tdd: Delete unused register
2016-10-05 17:41:08 +03:00
c196b5bf68
ad6676evb: VC707, fixed system top gpio_bd datawidth
2016-10-05 15:50:43 +03:00
ddceff2b5c
axi_usb_fx3: Updated header/footer signature
2016-10-04 16:11:24 +03:00
48dd4880a3
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
0e8551545c
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
b4652650e4
util_adxcvr- xcvr_type parameter
2016-10-03 16:11:45 -04:00
63ddcf1e26
util_adxcvr- synthesis warnings fix
2016-10-03 16:11:45 -04:00
8e0dc859af
axi_usb_fx3: Update
...
- added 1 clock delay for slrd_n signal
- rearrange databytes
2016-10-03 15:17:01 +03:00
43b3761b80
axi_ad9361: Flop the tx and rx valid
2016-10-03 12:24:04 +03:00
8e25bc01b3
all: Change tab to double space
...
Occasional file parsing and restructuring become a pain, if tabs exists
in code. General rule of the repos is tab always a double space.
2016-10-01 18:13:42 +03:00
0208335ef3
hdlmake- updates
2016-09-30 13:20:22 -04:00
27c9bdddb6
daq2/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
8e1034946f
fmcomms2/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
9afff7ae60
common/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
33f9ed33c7
projects- ultrascale+
2016-09-30 11:55:10 -04:00
AndreiGrozav
Rejeesh Kutty
Adrian Costina
Istvan Csomortani