Commit Graph

2405 Commits (03e744f0f1b697a3397a8269d02a4777e5bac33d)

Author SHA1 Message Date
AndreiGrozav 03e744f0f1 daq1_zed: Lower the adc and daq clock to 450MHz
The FPGA fabric on zedboard is a -1 speadgrade (max bufg clk 464MHz)
2017-10-04 13:01:14 +01:00
AndreiGrozav 7a3c4ab81f arradio: Changed ADC DMA buswidth connection to the DDR to 128 bits
This fixes the bandwidth issue when data is streamed from the DDR and the system works at 61.44 MSPS
2017-10-04 13:01:14 +01:00
STEVE KRAVATSKY ee01ea3736 daq2/a10gx: Add cfi_flash to qsys
+ Add cfi_flash to qsys
   + Set nios reset vector to cfi_flash
2017-10-04 11:30:29 +01:00
Istvan Csomortani a33f3178c2 adrv9371x/a10soc: For receive paths SYNC_TRANSFER must be enabled 2017-10-04 11:29:09 +01:00
Istvan Csomortani 899b8436ad arradio: Fix the last incorrect merge 2017-10-03 09:15:45 +01:00
Istvan Csomortani 89bd8b44d4 Merge branch 'dev' into hdl_2017_r1 2017-09-26 07:42:19 +01:00
AndreiGrozav 256dd87dd2 common/microzed: Enable PS CLK1 = 200MHz 2017-09-25 15:16:58 +03:00
Istvan Csomortani 07f3295638 common/a10soc: Update configuration for emif plddr4 IP 2017-09-25 08:57:26 +01:00
Istvan Csomortani 700ed156ab [axi|avl]_dacfifo: Create a separate bypass module for altera/xilinx 2017-09-25 08:56:40 +01:00
AndreiGrozav 3a47567f9c common/a10gx: Chance SPI frequency from 128KHz to 10 MHz 2017-09-19 18:01:18 +03:00
Adrian Costina cafa811c74 adrv9379: Change the DMA clock to 250 2017-09-11 16:52:44 +03:00
Rejeesh Kutty 58572d746c arradio/c5soc- rd10102013_979 fix 2017-09-05 12:52:41 -04:00
Lars-Peter Clausen c3aa3e8a9c adrv9371: a10soc: Whitespace cleanup
Remove some extra end-of-line whitespace.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-09-05 13:47:49 +02:00
Rejeesh Kutty 6736aaeca1 arradio- add control/status ports 2017-09-01 14:39:18 -04:00
Rejeesh Kutty bb73e7a40f arradio- add control/status ports 2017-09-01 14:39:18 -04:00
Adrian Costina 6ce4494002 adrv9379: Initial commit 2017-09-01 17:28:04 +03:00
Adrian Costina cb2fd6af73 dm2k: Drive the ADC DMA valid from the trigger extracting core 2017-08-30 18:28:52 +03:00
Rejeesh Kutty 5bc927ff94 adrv9364/ccbox- input rf protection 2017-08-25 13:30:46 -04:00
Rejeesh Kutty dc0a71920c adrv9361/ccbox- sort gpio - accidental multiple drivers 2017-08-25 13:30:46 -04:00
Rejeesh Kutty fd8b524953 adrv9361-ccbox/ccfmc- adl5904/gpio updates 2017-08-25 11:23:56 -04:00
Rejeesh Kutty 4050f5ae58 adrv9361- add adl5904 2017-08-24 15:47:17 -04:00
Lars-Peter Clausen e4988aa131 adrv9371x: altera: Convert to ADI JESD204
Convert the ADRV9371 project for Intel/Altera platforms to the ADI JESD204
framework.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:55:10 +02:00
AndreiGrozav d05ed29212 adrv9371x_zcu102: Initial commit 2017-08-22 15:48:03 +03:00
AndreiGrozav c0da4e6192 adrv9371x_kcu105: Initial commit 2017-08-22 15:41:49 +03:00
AndreiGrozav 1d67036305 adrv9371x/common: Remove ila_adc and ila_os_adc 2017-08-22 15:37:59 +03:00
AndreiGrozav 6fa45bb378 adrv9371x/common: Fix axi_ad9371_dacfifo/dac_rst assignamen 2017-08-22 15:37:59 +03:00
AndreiGrozav a64998c3ff adrv9371x: Separate ps7 assignaments from common
Move the assignaments/connections for ps7 from common/adrv9371_bd
to zc706/system_bd
2017-08-22 15:37:59 +03:00
AndreiGrozav b7ce81686a common/zcu102: Fix ps8 ref clock 0 frequency assignament 2017-08-22 15:37:59 +03:00
AndreiGrozav 41e247d426 common/zcu102: Add gpio_t connections 2017-08-22 15:37:59 +03:00
Istvan Csomortani 7fa8498b3a adrv9371x: DAC_FIFO should get the dma_rst from sys_dma_rstgen 2017-08-22 09:16:21 +01:00
Istvan Csomortani b0b79013f7 fmcomms11: Connect data underflow to the core 2017-08-22 09:16:21 +01:00
Lars-Peter Clausen d5eedf8356 daq2: Add support for Arria10 SoC platform
Add support for the AD-FMCDAQ2-EBZ on the Arria10 SoC development board platform.

In its default configuration the Arria10 SoC development board is not fully
compatible with the AD-FMCDAQ2-EBZ and a slight rework is necessary,
changing the position of four 0 Ohm resistors:

  R610: DNI -> R0
  R611: DNI -> R0
  R612: R0 -> DNI
  R613: R0 -> DNI
  R620: DNI -> R0
  R632: DNI -> R0
  R621: R0 -> DNI
  R633: R0 -> DNI

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-21 11:21:42 +02:00
Lars-Peter Clausen 17d3e3c64b daq2: daq2_qsys.tcl: Convert to ADI JESD204
Convert the DAQ2 project for Intel/Altera platforms to the ADI JESD204
framework.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-21 11:21:42 +02:00
Lars-Peter Clausen ce88b8ba91 daq2: daq2_qsys.tcl: Rework peripheral addresses
Rework the peripheral address to match the updated semantics of
ad_cpu_interconnect, which expects that the addresses are in the range of
0x00010000 - 0x001fffff. This includes updating the base addresses as well
as compressing the used address range to fit into the 2Mb window.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-21 11:21:42 +02:00
Istvan Csomortani c843a16797 microzed: Add a secondary 200 MHz clock for PS7 2017-08-18 10:14:21 +03:00
Rejeesh Kutty cd07ee80aa hdlmake.pl - updates 2017-08-09 14:09:14 -04:00
Rejeesh Kutty 4ef784b609 fmcomms2/zc702- pmod1 udc, pmod2 gpio 2017-08-09 14:08:47 -04:00
Rejeesh Kutty 6cee492d96 fmcomms5/zc702- pmods as gpios 2017-08-09 14:07:58 -04:00
Rejeesh Kutty 90af9a8f8c adv7511/zc702- pmods as gpios 2017-08-09 14:07:31 -04:00
Rejeesh Kutty c632f4463f projects/zc702- free pmod gpio for customization 2017-08-09 14:06:26 -04:00
Rejeesh Kutty b9683aab40 adrv936x- readme updates 2017-08-08 15:18:43 -04:00
Rejeesh Kutty b118c6874e adrv936x- readme updates 2017-08-08 15:14:16 -04:00
Rejeesh Kutty 8778986416 adrv936x- readme updates 2017-08-08 15:11:44 -04:00
rejeesh kutty 77275713e9 Update README.md 2017-08-08 14:09:37 -04:00
Rejeesh Kutty 1c386d4d34 hdlmake.pl- updates 2017-08-07 16:09:20 -04:00
Lars-Peter Clausen 28801f2f37 common: a10soc: Use correct DDR memory reference clock type
The DDR memory reference clock on the A10SoC development board is
differential. Currently the EMIF core it is configured for single-ended
configuration, which causes it to generate incorrect IOSTANDARD
constraints. Those incorrect constraints get overwritten again in
system_assign.tcl, so things are working, but this generates a warning when
building the design

Configure the EMIF core correctly and remove the manual constraint overwrite since
they are no longer necessary.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-07 17:42:17 +02:00
Rejeesh Kutty 15c3c96512 ad9361- clkdiv to util_ad9361_divclk 2017-08-07 11:25:55 -04:00
Rejeesh Kutty e4d71c99a6 fmcomms5- bd- data flow format 2017-08-07 11:25:55 -04:00
Istvan Csomortani d5d305ec79 fmcadc2: Fix connection between a db port and a net
The block design port should always be the first argument of the
ad_connect process call.
2017-08-07 17:00:01 +03:00
Rejeesh Kutty d0503536a8 adrv936x- bd.tcl in data flow format 2017-08-04 13:48:22 -04:00