AndreiGrozav
03e744f0f1
daq1_zed: Lower the adc and daq clock to 450MHz
...
The FPGA fabric on zedboard is a -1 speadgrade (max bufg clk 464MHz)
2017-10-04 13:01:14 +01:00
AndreiGrozav
7a3c4ab81f
arradio: Changed ADC DMA buswidth connection to the DDR to 128 bits
...
This fixes the bandwidth issue when data is streamed from the DDR and the system works at 61.44 MSPS
2017-10-04 13:01:14 +01:00
STEVE KRAVATSKY
ee01ea3736
daq2/a10gx: Add cfi_flash to qsys
...
+ Add cfi_flash to qsys
+ Set nios reset vector to cfi_flash
2017-10-04 11:30:29 +01:00
Istvan Csomortani
a33f3178c2
adrv9371x/a10soc: For receive paths SYNC_TRANSFER must be enabled
2017-10-04 11:29:09 +01:00
Istvan Csomortani
899b8436ad
arradio: Fix the last incorrect merge
2017-10-03 09:15:45 +01:00
Istvan Csomortani
89bd8b44d4
Merge branch 'dev' into hdl_2017_r1
2017-09-26 07:42:19 +01:00
AndreiGrozav
256dd87dd2
common/microzed: Enable PS CLK1 = 200MHz
2017-09-25 15:16:58 +03:00
Istvan Csomortani
07f3295638
common/a10soc: Update configuration for emif plddr4 IP
2017-09-25 08:57:26 +01:00
Istvan Csomortani
700ed156ab
[axi|avl]_dacfifo: Create a separate bypass module for altera/xilinx
2017-09-25 08:56:40 +01:00
AndreiGrozav
3a47567f9c
common/a10gx: Chance SPI frequency from 128KHz to 10 MHz
2017-09-19 18:01:18 +03:00
Adrian Costina
cafa811c74
adrv9379: Change the DMA clock to 250
2017-09-11 16:52:44 +03:00
Rejeesh Kutty
58572d746c
arradio/c5soc- rd10102013_979 fix
2017-09-05 12:52:41 -04:00
Lars-Peter Clausen
c3aa3e8a9c
adrv9371: a10soc: Whitespace cleanup
...
Remove some extra end-of-line whitespace.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-09-05 13:47:49 +02:00
Rejeesh Kutty
6736aaeca1
arradio- add control/status ports
2017-09-01 14:39:18 -04:00
Rejeesh Kutty
bb73e7a40f
arradio- add control/status ports
2017-09-01 14:39:18 -04:00
Adrian Costina
6ce4494002
adrv9379: Initial commit
2017-09-01 17:28:04 +03:00
Adrian Costina
cb2fd6af73
dm2k: Drive the ADC DMA valid from the trigger extracting core
2017-08-30 18:28:52 +03:00
Rejeesh Kutty
5bc927ff94
adrv9364/ccbox- input rf protection
2017-08-25 13:30:46 -04:00
Rejeesh Kutty
dc0a71920c
adrv9361/ccbox- sort gpio - accidental multiple drivers
2017-08-25 13:30:46 -04:00
Rejeesh Kutty
fd8b524953
adrv9361-ccbox/ccfmc- adl5904/gpio updates
2017-08-25 11:23:56 -04:00
Rejeesh Kutty
4050f5ae58
adrv9361- add adl5904
2017-08-24 15:47:17 -04:00
Lars-Peter Clausen
e4988aa131
adrv9371x: altera: Convert to ADI JESD204
...
Convert the ADRV9371 project for Intel/Altera platforms to the ADI JESD204
framework.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:55:10 +02:00
AndreiGrozav
d05ed29212
adrv9371x_zcu102: Initial commit
2017-08-22 15:48:03 +03:00
AndreiGrozav
c0da4e6192
adrv9371x_kcu105: Initial commit
2017-08-22 15:41:49 +03:00
AndreiGrozav
1d67036305
adrv9371x/common: Remove ila_adc and ila_os_adc
2017-08-22 15:37:59 +03:00
AndreiGrozav
6fa45bb378
adrv9371x/common: Fix axi_ad9371_dacfifo/dac_rst assignamen
2017-08-22 15:37:59 +03:00
AndreiGrozav
a64998c3ff
adrv9371x: Separate ps7 assignaments from common
...
Move the assignaments/connections for ps7 from common/adrv9371_bd
to zc706/system_bd
2017-08-22 15:37:59 +03:00
AndreiGrozav
b7ce81686a
common/zcu102: Fix ps8 ref clock 0 frequency assignament
2017-08-22 15:37:59 +03:00
AndreiGrozav
41e247d426
common/zcu102: Add gpio_t connections
2017-08-22 15:37:59 +03:00
Istvan Csomortani
7fa8498b3a
adrv9371x: DAC_FIFO should get the dma_rst from sys_dma_rstgen
2017-08-22 09:16:21 +01:00
Istvan Csomortani
b0b79013f7
fmcomms11: Connect data underflow to the core
2017-08-22 09:16:21 +01:00
Lars-Peter Clausen
d5eedf8356
daq2: Add support for Arria10 SoC platform
...
Add support for the AD-FMCDAQ2-EBZ on the Arria10 SoC development board platform.
In its default configuration the Arria10 SoC development board is not fully
compatible with the AD-FMCDAQ2-EBZ and a slight rework is necessary,
changing the position of four 0 Ohm resistors:
R610: DNI -> R0
R611: DNI -> R0
R612: R0 -> DNI
R613: R0 -> DNI
R620: DNI -> R0
R632: DNI -> R0
R621: R0 -> DNI
R633: R0 -> DNI
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-21 11:21:42 +02:00
Lars-Peter Clausen
17d3e3c64b
daq2: daq2_qsys.tcl: Convert to ADI JESD204
...
Convert the DAQ2 project for Intel/Altera platforms to the ADI JESD204
framework.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-21 11:21:42 +02:00
Lars-Peter Clausen
ce88b8ba91
daq2: daq2_qsys.tcl: Rework peripheral addresses
...
Rework the peripheral address to match the updated semantics of
ad_cpu_interconnect, which expects that the addresses are in the range of
0x00010000 - 0x001fffff. This includes updating the base addresses as well
as compressing the used address range to fit into the 2Mb window.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-21 11:21:42 +02:00
Istvan Csomortani
c843a16797
microzed: Add a secondary 200 MHz clock for PS7
2017-08-18 10:14:21 +03:00
Rejeesh Kutty
cd07ee80aa
hdlmake.pl - updates
2017-08-09 14:09:14 -04:00
Rejeesh Kutty
4ef784b609
fmcomms2/zc702- pmod1 udc, pmod2 gpio
2017-08-09 14:08:47 -04:00
Rejeesh Kutty
6cee492d96
fmcomms5/zc702- pmods as gpios
2017-08-09 14:07:58 -04:00
Rejeesh Kutty
90af9a8f8c
adv7511/zc702- pmods as gpios
2017-08-09 14:07:31 -04:00
Rejeesh Kutty
c632f4463f
projects/zc702- free pmod gpio for customization
2017-08-09 14:06:26 -04:00
Rejeesh Kutty
b9683aab40
adrv936x- readme updates
2017-08-08 15:18:43 -04:00
Rejeesh Kutty
b118c6874e
adrv936x- readme updates
2017-08-08 15:14:16 -04:00
Rejeesh Kutty
8778986416
adrv936x- readme updates
2017-08-08 15:11:44 -04:00
rejeesh kutty
77275713e9
Update README.md
2017-08-08 14:09:37 -04:00
Rejeesh Kutty
1c386d4d34
hdlmake.pl- updates
2017-08-07 16:09:20 -04:00
Lars-Peter Clausen
28801f2f37
common: a10soc: Use correct DDR memory reference clock type
...
The DDR memory reference clock on the A10SoC development board is
differential. Currently the EMIF core it is configured for single-ended
configuration, which causes it to generate incorrect IOSTANDARD
constraints. Those incorrect constraints get overwritten again in
system_assign.tcl, so things are working, but this generates a warning when
building the design
Configure the EMIF core correctly and remove the manual constraint overwrite since
they are no longer necessary.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-07 17:42:17 +02:00
Rejeesh Kutty
15c3c96512
ad9361- clkdiv to util_ad9361_divclk
2017-08-07 11:25:55 -04:00
Rejeesh Kutty
e4d71c99a6
fmcomms5- bd- data flow format
2017-08-07 11:25:55 -04:00
Istvan Csomortani
d5d305ec79
fmcadc2: Fix connection between a db port and a net
...
The block design port should always be the first argument of the
ad_connect process call.
2017-08-07 17:00:01 +03:00
Rejeesh Kutty
d0503536a8
adrv936x- bd.tcl in data flow format
2017-08-04 13:48:22 -04:00