cf456caa0e
util_gmii_to_rgmii: Gmii to RGMII converter for the motcon2 project
2015-02-20 16:13:54 +02:00
a81bc7e463
Motor control cores updated for motcon2
2015-02-20 16:12:11 +02:00
277161c143
axi_dmac: Correctly handle shutdown for the request splitter
...
We need to make sure to not prematurely de-assert the s_valid signal for the
request splitter when disabling the DMAC. Otherwise it is possible that
under certain conditions the DMAC is disabled with a partially accepted
request and when it is enabled again it will continue in an inconsistent
state which can lead to transfer corruption or pipeline stalls.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:04:47 +01:00
81a17121b0
axi_dmac: Use internal enable signal for the request generator
...
All components should use the internal 'do_enable' signal instead of the
external 'enable' signal. The former correctly incorporates the shutdown
sequence and does not get asserted again until the shutdown has been
completed. Using the external signal can cause problems when it is disabled
and enabled again in close proximity.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:04:47 +01:00
23eb0d2428
axi_dmac: request_generator: Stop generating requests when disabled
...
Currently when the DMAC gets disabled the request_generator will still
generate all remaining burst requests for the currently active transfer.
While these requests will be ignored by the source and destination component
this can still take a fair amount of time for long transfers.
So just stop generating burst requests once the DMAC is being disabled.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:04:47 +01:00
e15f0cd2c6
dmac: fifo_inf: Handle overflow and underflow correctly
...
Refactor the fifo_inf modules to always correctly generate the underflow and
overflow status signals. Before it was possible that in some cases they
were not generated when they should have been.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:04:47 +01:00
8839c8b18c
xfer-logic: stretch toggles to allow capture
2015-02-06 22:07:00 -05:00
8050a14bd8
xfer-logic: stretch toggles to allow capture
2015-02-06 22:06:56 -05:00
8fedb5b41c
fifo2s: qualify last with valid
2015-01-15 09:34:43 -05:00
63633a0fa5
ad9739a: constraints
2015-01-08 10:25:45 -05:00
ed73a9d1cf
ad9739a: updated to ad9739a
2015-01-08 10:25:15 -05:00
ad4b4f64d0
ad9739a: ad9122 copy
2015-01-07 15:36:02 -05:00
b65bcab8d6
up_clkgen: reading typo
2015-01-07 13:58:43 -05:00
c3529f112f
up_gt: move status to up clock
2014-12-19 13:00:27 +02:00
f4774d6f98
fifo2s: false path typo on source signals
2014-12-19 13:00:13 +02:00
c4152627f0
plddr3: Sync adc_wcnt_int to adc_wr and fix adc_dwr pulse width
...
The adc_wcnt_int must be synchronized to adc_wr. The adc_dwr signal pulse width was to long,
it needs to be just one adc_clk cycle.
2014-12-09 13:59:19 +02:00
6aad2fbbb2
axi_hdmi_tx: Fixed typo in altera related core
2014-12-09 10:19:03 +02:00
ea1a50c985
axi_mc_speed: updated core to latest axi interface implementation
2014-12-05 11:46:20 +02:00
0d2888a5a6
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:45:37 +02:00
21591dc485
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:43:59 +02:00
6197563506
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
403f8c0631
util_cpack: ipi doesn't like local params
2014-11-21 15:32:13 -05:00
3b500bafcc
util_cpack: add port controls on ipi
2014-11-21 15:32:12 -05:00
5ca2944b70
library/util_cpack: initial checkin
2014-11-21 15:32:10 -05:00
42874bfe81
prcfg_library: Major update
...
Get rid of the QPSK symbol wrapper for now. The DMA data path is using the 2 LSB bits.
2014-11-18 10:05:52 +02:00
a4724f8396
es: added kcu105 gth
2014-11-17 09:55:12 -05:00
b1c91fac92
es: added kcu105 gth
2014-11-17 09:55:10 -05:00
fd305f2eff
es: added kcu105 gth
2014-11-17 09:55:09 -05:00
6dd1226696
axi_ad9643: Fixed constraint file
2014-11-17 12:12:09 +02:00
8831d9dbd7
axi_ad9122: fixed constraint file
2014-11-17 12:11:20 +02:00
2744d0cb37
util_wfifo: Update to implement flip flops
2014-11-17 12:10:21 +02:00
41ffc66c26
fifo2s: removed m interface
2014-11-13 15:00:03 -05:00
8761db438e
axi_fifo2f: common interface with fifo2s
2014-11-12 15:15:32 -05:00
925e966eb6
axi_fifo2s: fifo full replaced with ready
2014-11-12 14:43:47 -05:00
5fc4f1b000
axi_fifo2s: buswidth fix
2014-11-12 14:43:46 -05:00
d204a7c2b7
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:44 -05:00
e7cec7171e
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:43 -05:00
4381f20a6a
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:42 -05:00
9f2dbad539
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:41 -05:00
e683b5868e
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:40 -05:00
81b4cd532d
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:38 -05:00
888ab888d2
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:37 -05:00
f8e7796592
axi_jesd_gt: Fix lane number parameters
2014-11-12 17:43:32 +02:00
bf62665c56
prcfg_qpsk: Add Simulink model
...
Matlab version used: R2014a, HDL Coder 3.3
2014-11-12 15:44:38 +02:00
64ec633438
gt: asymmetric no of lanes
2014-11-11 08:54:24 -05:00
cb15567a56
ad6676: added
2014-11-10 13:36:07 -05:00
c6df568a00
Revert "ad_interrupts: Initial check in."
...
This reverts commit b254380338
2014-11-06 12:16:52 +02:00
b11d80ed98
ad_rst: changed to dual stage
2014-11-05 16:48:02 -05:00
74ec396b27
ad_rst: ultrascale -dual stage
2014-11-05 16:47:41 -05:00
d69ccebbde
ad9234: full 16bit samples
2014-11-05 11:59:08 -05:00
Adrian Costina
Lars-Peter Clausen
Rejeesh Kutty
Istvan Csomortani