Commit Graph

34 Commits (169f38e7d1f081957a6613f8668df80ed6844c8f)

Author SHA1 Message Date
AndreiGrozav 8a306ce96b axi_ad9162: Updates for ad_dds phase acc wrapper 2018-07-18 18:19:30 +03:00
AndreiGrozav 8dd1687094 axi_ad9162: Update for CORDIC algorithm
Add the new files to the IP list
Propagate DDS parameters to top file
2018-07-18 18:19:30 +03:00
Lars-Peter Clausen bd251a5fd5 Remove unused DMA overflow signal from DAC DMA interfaces
The DAC DMA will never overflow and unsurprisingly the dac_dovf signal is
never used anywhere. It is very unlikely it will ever be used, so remove
it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-05-02 17:21:20 +02:00
Lars-Peter Clausen 8e90d5db20 axi_ad9162: Infer clock signal for tx_clk port
Fixes the following warning:
  [BD 41-1731] Type mismatch between connected pins: /util_fmcomms11_xcvr/tx_out_clk_0(clk) and /axi_ad9162_core/tx_clk(undef)

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-18 15:16:13 +02:00
Lars-Peter Clausen 2b914d33c1 Move Altera IP core dependency tracking to library Makefiles
Currently the individual IP core dependencies are tracked inside the
library Makefile for Xilinx IPs and the project Makefiles only reference
the IP cores.

For Altera on the other hand the individual dependencies are tracked inside
the project Makefile. This leads to a lot of duplicated lists and also
means that the project Makefiles need to be regenerated when one of the IP
cores changes their files.

Change the Altera projects to a similar scheme than the Xilinx projects.
The projects themselves only reference the library as a whole as their
dependency while the library Makefile references the individual source
dependencies.

Since on Altera there is no target that has to be generated create a dummy
target called ".timestamp_altera" who's only purpose is to have a timestamp
that is greater or equal to the timestamp of all of the IP core files. This
means the project Makefile can have a dependency on this file and make sure
that the project will be rebuild if any of the files in the library
changes.

This patch contains quite a bit of churn, but hopefully it reduces the
amount of churn in the future when modifying Altera IP cores.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-11 15:09:54 +03:00
Lars-Peter Clausen 35a39ba2e6 Regenerate library Makefiles using the new shared Makefile include
This reduces the amount of boilerplate code that is present in these
Makefiles by a lot.

It also makes it possible to update the Makefile rules in future without
having to re-generate all the Makefiles.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-11 15:09:54 +03:00
Istvan Csomortani 425e803364 license: Fix a spelling mistake 2018-04-11 15:09:54 +03:00
Adrian Costina 493fc1d48b axi_*: Fix instantiation of up_[adc|dac]_[common|channel]
A couple of new parameters and new ports are missing in several
up_[adc|dac]_[common|channel] instance, and generates warnings. The rule of
thumb is to use full instantiations, defining all the existing parameter and
ports of the module.

Fix all the instantiation of up_[adc|dac]_[common|channel], by defining all its
parameters and ports.
2018-04-11 15:09:54 +03:00
Istvan Csomortani d81f605ae9 axi_ad9162: Fix code alignment, no functional changes 2018-04-11 15:09:54 +03:00
Lars-Peter Clausen fa9d94bfe8 avl_adxcvr: Perform octet order swap
The ADI transport layer peripherals expect the first octet to be in the
LSBs and the last octet to be in the MSBs. The Altera JESD204 core orders
the octets the other way around though, first octet in the MSBs and last
octet in the LSBS.

Currently this is handled by having each transport layer peripheral swap
the octets around when it is connected to the Altera JESD204 core.

Change this so that rather than having to do the data swizzling in every in
every transport layer peripheral perform it at the input/output of the link
layer peripheral inside the generated block.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-03 17:57:58 +02:00
Lars-Peter Clausen de4fe30238 library: Match s_axi_{awaddr,araddr} signal width to peripheral memory map size
The external s_axi_{awaddr,araddr} signals that are connect to the core
have their width set according to the specified size of the register map.

If the s_axi_{awaddr,araddr} signal of the core is wider (as it currently
is for many cores) the MSBs of those signals are left unconnected, which
generates a warning.

To avoid this make sure that the signal width matches the declared register
map size.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-01 15:21:25 +02:00
Istvan Csomortani 84b2ad51e2 license: Add some clarification to the header license 2017-05-31 18:18:56 +03:00
Istvan Csomortani 85ebd3ca01 license: Update license terms in hdl source files
Fix a few gramatical error, fix the path of the top level license
files.
2017-05-29 09:55:41 +03:00
Istvan Csomortani 9055774795 all: Update license for all hdl source files
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.

New license looks as follows:

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.

Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
 (at the option of the user):

  1. The GNU General Public License version 2 as published by the
     Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html

OR

  2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
AndreiGrozav 0e1e507541 axi dac cores: Add missing ports to up_dac_common instance 2017-05-12 13:37:34 +03:00
Rejeesh Kutty 5d6b018b2b ad9162- add iq swap 2017-04-26 20:54:47 -04:00
Istvan Csomortani 1c23cf4621 all: Update verilog files to verilog-2001 2017-04-13 11:59:55 +03:00
Istvan Csomortani c1bdfca4c3 library: Delete all adi_ip_constraint process call 2017-04-06 12:36:47 +03:00
Istvan Csomortani c46989e4e8 Makefile: Update Makefiles for libraries 2017-03-30 18:33:22 +03:00
Istvan Csomortani 873fbfd6d7 library: Update scripts with new constraints
Update all IPs tcl scripts with the new constraints files.
Refer to commit 335fef0.
2017-03-30 16:16:02 +03:00
Adrian Costina 8ebc8fe4e2 updated makefiles 2016-12-09 23:06:41 +02:00
Rejeesh Kutty b85a282748 fmcomms11- lane swap 2016-11-16 10:26:47 -05:00
AndreiGrozav 9d6c93a5d8 Fix warnings 2016-11-14 15:17:15 +02:00
Istvan Csomortani 8dbfe9258f axi_ad9162: Delete duplicated port 2016-10-21 13:47:01 +03:00
AndreiGrozav 43ee917d53 Add up_dac_channel missing connections 2016-10-12 13:20:26 +03:00
Rejeesh Kutty c98e2e95dd ad9162- xcvr updates 2016-09-26 15:21:45 -04:00
Rejeesh Kutty f6c7aa9005 library- dac parameter changes 2016-09-23 16:15:59 -04:00
Istvan Csomortani 913eafed48 up_drp : Update the DRP interface to support Altera platforms 2016-09-21 15:00:45 +03:00
Istvan Csomortani 0cd608a7e2 lib_refactoring: Update Make files 2016-08-08 16:38:38 +03:00
Istvan Csomortani df36902713 lib_refactoring: Fix path of the IO macros 2016-08-08 15:07:19 +03:00
Adrian Costina d60bce654c Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools 2016-08-05 15:16:04 +03:00
Rejeesh Kutty 3a1ecb7463 ad9162- support iq mode 2016-07-21 11:58:03 -04:00
Rejeesh Kutty 48762519b5 make updates 2016-07-06 15:02:00 -04:00
Shrutika Redkar d931b2ee64 ad9162 core verilog files 2016-06-30 10:24:01 -04:00