7a4a7edfba
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:07:41 -04:00
e00236e5fd
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:04:46 -04:00
679d471d75
Merge branch 'hdl_2016_r1' into dev
...
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
2016-04-19 18:05:50 +03:00
3006c5a223
make updates
2016-04-11 16:14:59 -04:00
21208ca208
Makefiles: Update Makefiles
2016-03-31 12:37:47 +03:00
1fab6ce477
daq2/common: Add util_dacfifo/dac_xfer_out control
2016-03-29 16:55:33 +03:00
657144d9a7
a10gx: Updated base design and DAQ2 to the new revision of the a10gx board
...
- tried using ATX PLL and fPLL for TX transceiver clocks, but could not get them to lock
- CMU PLL works correctly as temporary solution
2016-03-28 13:21:36 +03:00
b7be089b82
daq2: Updated common design to 2015.4
2016-03-16 10:02:42 +02:00
977d9d0624
Merge branch 'hdl_2015_r2' into dev
...
Conflicts:
projects/daq1/common/daq1_spi.v
2016-03-02 13:52:15 +02:00
40fb68dfd5
ad9265, ad9434, ad9467, daq1, daq2, daq3, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1, fmcomms6, fmcomms7, usdrx1: updated common spi module so that spi streaming is possible
2016-03-02 13:39:37 +02:00
becc23a69b
daq2: Modified common spi module so that spi streaming is possible
...
- stop incrementing spi_count after the instruction cycle
2016-03-01 17:25:58 +02:00
e012d0519b
Merge remote-tracking branch 'origin/hdl_2015_r2' into dev
2016-02-26 13:39:39 -05:00
8ccd8d87bb
daq2: A10GX, increase analog/digital reset durations
...
- reset the xcvr_rst_cntrl only from the axi_jesd_xcvr
- checked separate RX/TX reset per channel
2016-02-23 11:41:38 +02:00
377461e0d4
Merge branch 'hdl_2015_r2' into dev
2016-02-19 14:15:27 +02:00
ad9ecbbbb6
daq2: Updated a10gx project to quartus 15.1.1
2016-02-05 17:43:05 +02:00
e22d5d5c18
daq2: Fix clock constraints for KC705 and VC707
2016-01-22 19:09:57 +02:00
da2e1bdc9a
daq2/a10gx: 32bits generic gpio
2015-12-11 11:50:26 -05:00
2309c4d83c
Makefiles: Removed " from path
2015-11-27 14:02:46 +02:00
159f6c1216
Makefiles: Updated Makefiles
...
- for altera projects, taken into consideration of the new location for common qsys files
- for fmcomms5, added wfifo dependency
- for daq3, added mfifo dependency
2015-11-27 12:39:42 +02:00
ea57b3c03c
daq2: A10GX, add project specific IP search paths
2015-11-25 10:58:36 +02:00
a81625e1fa
daq2: Updated a10gx project
2015-11-24 13:28:53 +02:00
5cc97c78d3
Makefiles: Update makefiles to include the nerw axi_gpreg / util_mfifo libraries
2015-11-10 09:32:50 +02:00
e36f27b061
daq2: Update A10GX project, with the latest changes.
...
Works with up to 64k samples
2015-11-04 14:54:09 +02:00
9d2b8809df
Makefiles: Updated Makefiles
2015-10-23 10:44:27 +03:00
7184827d68
daq2: Drop explicit axi_dmac clock synchronicity configuration
...
The axi_dmac core is now capable of detecting whether its different parts
run in different clock domains or not. No need to configure it manually any
more.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-09-18 15:27:54 +02:00
a679251d7d
Makefiles: Update Make
2015-09-09 17:13:19 +03:00
f1d416a98b
daq2/a10gx- ethernet fix
2015-09-02 14:31:15 -04:00
1fff1076b1
daq2/a10gx- ethernet fix
2015-09-02 14:31:15 -04:00
15be942b74
daq2-a10gx- ignore cpu2ddr-io paths
2015-08-27 13:54:05 -04:00
90e4cadf4b
daq2/kcu105- xcvr pin loc
2015-08-27 12:40:44 -04:00
7c8e56cb09
daq2/kcu105- pin loc is now all errors
2015-08-27 11:18:00 -04:00
89c7a4de79
daq2/kcu105- parameter changes
2015-08-27 11:18:00 -04:00
58fa29b673
daq2- jesd core upgrade
2015-08-27 11:18:00 -04:00
78cf0fce0e
ddr/eth- pll refclock is defined by the cores
2015-08-21 14:42:15 -04:00
827fc1e29a
remove auto-pack disable
2015-08-20 13:54:16 -04:00
2dabf98089
parameter changes
2015-08-20 08:54:13 -04:00
d52308f074
axi_dmac: Change parameter name 2D_TRANSFER
...
Parameter name can't start with numbers, 2D_TRANSFER was changed to DMA_2D_TRANSFER
2015-08-20 10:14:22 +03:00
0ec17fd4d6
daq2-a10gx- parameter changes
2015-08-19 14:56:00 -04:00
0e587dd955
daq2/a10gx-- ad-rst unpack
2015-08-19 13:26:38 -04:00
fdeeef3d77
daq2/a10gx-- intmem to ddr
2015-08-19 13:26:38 -04:00
413c322145
base/daq2- updates
2015-08-19 13:26:38 -04:00
f40abf171f
cpack- adc_rst added
2015-08-19 13:26:38 -04:00
57cfb7cfb1
hdl/library: Update the IP parameters
...
The following IP parameters were renamed:
PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
e221c3b48c
daq2- gt changes
2015-08-17 14:11:58 -04:00
c72cf99562
daq2- gt changes
2015-08-17 14:11:58 -04:00
b4eac232db
a10gx- move cores inside qsys
2015-07-21 11:06:45 -04:00
fcc298d837
a10gx- move cores inside qsys
2015-07-21 11:06:17 -04:00
b3102b5095
daq2/a10gx-- xcvr+base changes
2015-07-21 11:01:45 -04:00
445c4c835d
daq2-bd: xcvr components
2015-07-21 10:54:23 -04:00
97b8468819
daq2- constraints
2015-07-20 09:32:17 -04:00
1d6a77049d
daq2- base/board split
2015-07-20 09:31:57 -04:00
4b8d764852
daq2- base system modifications
2015-07-20 09:31:44 -04:00
da2e7acacb
daq2- separate base/board systems
2015-07-20 09:31:15 -04:00
2f53dc4412
daq2- board system only
2015-07-20 09:30:32 -04:00
80dc3bf92f
daq2/a10gx: remove signal tap
2015-07-16 14:59:01 -04:00
a7da779b94
Makefile: Updated Makefiles
2015-07-16 18:19:42 +03:00
7c142178dd
daq2/a10gx- axi_jesd_xcvr sysref name changes
2015-07-15 15:59:52 -04:00
ffd767deb2
daq2/a10gx- axi_jesd_xcvr sysref name changes
2015-07-15 15:59:51 -04:00
1f7745610e
daq2- ddr updates
2015-07-14 12:46:52 -04:00
a2e7fb9491
daq2/a10gx: qsys signal tap version
2015-07-13 10:07:18 -04:00
825fddd034
transceiver split up outside qsys
2015-07-10 11:45:07 -04:00
8c0d74aa90
transceiver split up outside qsys
2015-07-10 11:44:42 -04:00
e40aac9ab6
transceiver split up outside qsys
2015-07-10 11:44:22 -04:00
f1dd2435b4
signal tap removed
2015-07-08 15:47:31 -04:00
c9e73b023d
signal tap removed
2015-07-08 15:46:52 -04:00
075b1e5424
daq2/a10gx: added axi_jesd_xcvr control
2015-07-07 10:22:36 -04:00
46fa91d5be
Makefile: Update Make files
2015-07-03 18:08:57 +03:00
6bc24e25eb
stap- need to be qsys
2015-06-29 13:26:32 -04:00
d25e02d7ee
stap- need to be qsys
2015-06-29 13:26:20 -04:00
6862655b0d
Add .gitattributes file
...
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
714d415804
daq2/a10gx- signaltap changes
2015-06-19 14:33:04 -04:00
51e6a74a3d
daq2/a10gx- add xmit swap
2015-06-19 14:32:59 -04:00
d6b1260678
daq2/a10gx- signal tap + gpio
2015-06-19 14:32:58 -04:00
67df6b3ea8
a10gx- disable lab cell on dsp input register
2015-06-19 14:32:54 -04:00
4c80013faf
projects/daq2: gt lane split
2015-06-12 15:56:03 -04:00
e6525136a9
daq2/common: axi_ad9144_fifo needs a proper reset sequence
...
Connect the axi_ad9144_fifo/dma_rst signal to sys_cpu_reset
2015-06-12 14:03:46 +03:00
f587aa42d9
a10gx- tx sync
2015-06-10 14:32:25 -04:00
e3e4af5c51
daq2/zc706: open ports
2015-06-10 14:25:58 -04:00
00b8c171b8
a10gx: pll locked to reset controller
2015-06-08 15:00:11 -04:00
f81d22a17a
altera- common timing check
2015-06-04 10:56:32 -04:00
d111692608
daq2/a10gx- ddr-ref @133
2015-06-04 10:53:16 -04:00
f9ffaf457d
projects/daq2- drp moved to up clock
2015-06-01 13:39:26 -04:00
4a701d3895
a10gx- no-ddr
2015-06-01 11:00:02 -04:00
a6cae6b477
iobuf: do is a system verilog keyword
2015-05-21 14:06:17 -04:00
ad3198f623
a10gx: top level fixes
2015-05-21 14:06:15 -04:00
6b9906b22b
Refresh Makefiles
...
Re-generate the Makefiles after a small update to the generation script:
- Entries are sorted alphabetically
- Empty dependency lines are skipped
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 14:21:54 +02:00
19b094cab5
daq2/a10gx- added jesd align
2015-05-20 15:39:27 -04:00
f1c30ac225
daq2/a10gx- qsys updates
2015-05-20 14:24:49 -04:00
52b6077a46
a10gx- 15.0 updates
2015-05-19 15:12:23 -04:00
c19749361d
Makefiles: Updated makefiles to have as a result the programming file instead of the project file.
...
Also fixed altera projects dependencies
2015-05-18 17:22:46 +03:00
672a5a4dfa
a10gx- updates
2015-05-14 14:35:43 -04:00
848dac70d5
a10gx: updates--
2015-05-11 11:56:27 -04:00
dc0eea5f0f
a10gx: updates--
2015-05-11 11:56:26 -04:00
bdc3f3d807
a10gx: updates--
2015-05-11 11:56:24 -04:00
75e055dab9
daq2/a10gx- initial commit
2015-05-11 11:56:23 -04:00
15618c9edf
daq2 : Integrate the DACFIFO into the supported projects.
...
+ All pack/unpack logic is made by the cpack and upack modules.
+ The DAC FIFO is integrated between the TX DMA and cpack.
+ All the top files are updated, all the projects compiled successfully.
2015-05-11 12:20:50 +03:00
00335a2af2
Makefile: Fix ZC706 Makefiles with propper address for the mig file
2015-05-11 10:25:07 +03:00
91279253ef
Makefiles: Added mig project file as a dependency for Microblaze based projects. Also updated usdrx1 a5gt Makefile
2015-05-08 15:31:40 +03:00
949abcdc8f
Makefile: Updated makefiles so that the project recipe does not depend on lib
2015-05-06 14:58:29 +03:00
e332fa01c8
ad6676evb, daq2, fmcadc2, fmcjesdadc1, usdrx1: Updated jesd reset connection
2015-04-30 12:11:46 +03:00
Rejeesh Kutty
AndreiGrozav
Istvan Csomortani
Adrian Costina
Lars-Peter Clausen