558f2e89af
imageon: zc706: Fix ddr and fixed_io signal names
...
The toplevel input/output signal names are lower case, but the signals
connected to the system_wrapper are upper case. Since verilog is case
sensitive this leaves the toplevel input/output signals unconnected. Fix
this by using lower case names everywhere.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
1bb5b6e55f
adv7511: zc706: Fix ddr and fixed_io signal names
...
The toplevel input/output signal names are lower case, but the signals
connected to the system_wrapper are upper case. Since verilog is case
sensitive this leaves the toplevel input/output signals unconnected. Fix
this by using lower case names everywhere.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
a61a195e3f
Makefiles: Updated makefiles to add the new constraints as dependecies
2015-04-23 11:16:39 +03:00
e25cfb9d9f
rfsom: ddr configuration
2015-04-22 13:45:11 -04:00
a100ecd308
util_dacfifo: Update BRAM DAC Fifo
...
The fifo will be placed between the DMAC and the Upack module, all the interfaces were updated.
2015-04-21 15:45:56 +03:00
3fd830b038
fmcomms2: Use AXI3 interface for the DMA on ZYNQ
...
On ZYNQ the HP interconnects have a AXI3 interface. The DMA controller
supports both AXI4 and AXI3. By switching to AXI3 there is no need to create
a protocol converter between the DMA and the HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-17 19:51:37 +02:00
71d4f3a474
fmcomms2: Don't mark synchronous paths as asynchronous for the DMAs
...
The AXI master interface and the register map AXI slave interface use the
same clock. No need to mark the interfaces as asynchronous. This removes the
need for CDC logic on those paths.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-17 19:51:37 +02:00
dc2b37bd0c
Makefile: Added top level Makefile. Modified behavior of clean and clean-all
...
Clean ran for a project will clean only the project files.
Clean-all ran for a project will clean also the library files on which the project depends.
The clean commands will only remove specific files and directories.
The top Makefile allows several options(per suggestion from jameyhicks):
make fmcomms1.zed will run "make all" in projects/fmcomms1/zed/
make clean will run "make clean" for all the projects
make clean-all will run "make clean" for all the projects and libraries
make lib will run "make all" for the library files
2015-04-17 17:22:38 +03:00
374f82e7de
makefiles: The clean command for library won't remove the xml files, except for component.xml.
...
Updated also the dmac dependencies
2015-04-16 11:53:27 +03:00
8b5d1a8693
fmcadc2: Connect the second CS line for the external SPI interface
2015-04-15 19:08:17 +03:00
780455d68c
Makefile: Updated makefiles. Added makefiles for altera
2015-04-09 17:57:06 +03:00
afea42f444
rfsom: Use interface connection for the I2S stream
...
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:26 +02:00
90e132d203
mitx045: Use interface connection for the I2S stream
...
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
7f26bfe436
zed: Use interface connection for the I2S stream
...
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
06e37b0082
common: zed: Use interface to connect I2C core to the I2C mixer
...
Use a interface connection for the I2C connection instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
7da59a435f
common: rfsom: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
1f2ecaf037
common: mitx045: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
1d66cf63b6
common: zc706: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
ab5c7bb57b
common: zc702: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
70deb1eed1
common: zed: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
38722e569b
common: zed: Fix audio DMA reset signals
...
Make sure to connect the I2S and SPDIF core DMA reset signals to the correct net.
Fixes audio support on the ZED board.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
5f8e9a74ea
makefile: updated
2015-04-07 16:32:01 -04:00
6d0a2bf64c
axi_adcfifo: added
2015-04-07 16:21:39 -04:00
4f7f109056
util_adcfifo: added
2015-04-07 16:08:38 -04:00
02dfa865b4
fmcadc5_vc707: Fix system top.
2015-04-06 12:15:49 +03:00
0a8823361f
fmcjesdadc1/a5gt: 14.1 updates
2015-04-03 14:54:57 -04:00
3aac5f9494
fmcjesdadc1/a5gt: 14.1 updates
2015-04-03 14:54:55 -04:00
5abf60345c
fmcomms7: dac lane mux
2015-04-03 13:42:27 -04:00
26a1f48724
fmcomms7: dac lane mux
2015-04-03 13:42:27 -04:00
0b00073ce5
rfsom: add ddr parameters
2015-04-03 13:42:27 -04:00
49b8d389f6
fmcjesdadc1: Kc705, fixed system top,SPI
2015-04-03 18:28:26 +03:00
5afcfa37a7
ad6676evb: changed the dma clock
2015-04-03 18:27:46 +03:00
f79a152958
Makefiles: updated all makefiles adding clean functionality
2015-04-03 11:57:54 +03:00
51b5e4ddc5
fmcomms5: Moved the clock generation for dma transfer inside system_bd of the platform
2015-04-02 22:29:17 +03:00
a8b2292370
ad9265: Changed the dma clock
2015-04-02 22:27:55 +03:00
f15ff45afc
imageon_zed: Initial commit plus fix ILAs
2015-04-02 18:53:45 +03:00
2937445cce
fmcomms2_pr: Update project to the new frame work.
2015-04-02 16:06:08 +03:00
9745462d88
fmcomms2: VC707 fixed top file
2015-04-02 15:31:40 +03:00
9dac22c814
fmcomms2: ZC702 fixed GPIOs in top file
2015-04-02 15:30:41 +03:00
243a9bc992
fmcomms1: AC701 update project to new framework
2015-04-02 15:30:02 +03:00
0162009099
cftl_cip: Update project to the new frame work.
2015-04-02 15:14:04 +03:00
8ed301a264
AC701: Common, removed system clock constraint
2015-04-02 11:51:20 +03:00
408dc6f018
ac701_base: Change data and instruction memory range to 8kbyte
2015-04-02 11:34:20 +03:00
dbbdeeaa0c
fmcomms1: Updated AC701 project to new framework
2015-04-02 11:22:16 +03:00
a4e9dd5fc4
fmcomms2: KC705 updated project
2015-04-02 11:21:13 +03:00
0184d2a4c7
makefile: added
2015-04-01 16:30:05 -04:00
a16ded55cf
makefile: added
2015-04-01 16:30:04 -04:00
ef32088c25
makefile: added
2015-04-01 16:30:03 -04:00
d7671ecf6d
makefile: added
2015-04-01 16:30:02 -04:00
a7d40aa0f2
makefile: added
2015-04-01 16:30:00 -04:00
e9a4a41823
makefile: added
2015-04-01 16:29:59 -04:00
9dba2d1e3b
makefile: added
2015-04-01 16:29:58 -04:00
c0b0abd8b7
makefile: added
2015-04-01 16:29:57 -04:00
36868c5433
makefile: added
2015-04-01 16:29:55 -04:00
fe8fb8f5ed
makefile: added
2015-04-01 16:29:54 -04:00
c63dead379
makefile: added
2015-04-01 16:29:53 -04:00
5165129c92
makefile: added
2015-04-01 16:29:52 -04:00
1697f297f8
makefile: added
2015-04-01 16:29:50 -04:00
59698474af
makefile: added
2015-04-01 16:29:49 -04:00
596d9db915
makefile: added
2015-04-01 16:29:48 -04:00
968836011f
makefile: added
2015-04-01 16:29:47 -04:00
c99630cb49
makefile: added
2015-04-01 16:29:45 -04:00
a9fe02419e
makefile: added
2015-04-01 16:29:44 -04:00
15ad9c287f
makefile: added
2015-04-01 16:29:43 -04:00
c46866e78c
makefile: added
2015-04-01 16:29:42 -04:00
c5a67ad1cd
makefile: added
2015-04-01 16:29:41 -04:00
74d3d458da
makefile: added
2015-04-01 16:29:39 -04:00
b1cc047d04
makefile: added
2015-04-01 16:29:38 -04:00
25a6a75a32
makefile: added
2015-04-01 16:29:37 -04:00
c5ccd44ffb
makefile: added
2015-04-01 16:29:36 -04:00
006a4fd209
makefile: added
2015-04-01 16:29:34 -04:00
61bdb437b1
makefile: added
2015-04-01 16:29:33 -04:00
970d5f8c3e
makefile: added
2015-04-01 16:29:32 -04:00
5f149535b5
makefile: added
2015-04-01 16:29:31 -04:00
48e8945ac1
makefile: added
2015-04-01 16:29:29 -04:00
1c1464876c
makefile: added
2015-04-01 16:29:28 -04:00
56615a19f2
makefile: added
2015-04-01 16:29:27 -04:00
1a14a36db6
makefile: added
2015-04-01 16:29:26 -04:00
c085fbdd35
makefile: added
2015-04-01 16:29:24 -04:00
077d2699fe
makefile: added
2015-04-01 16:29:23 -04:00
d50bf705ef
makefile: added
2015-04-01 16:29:22 -04:00
9e8cb22c96
makefile: added
2015-04-01 16:29:21 -04:00
0a62cc9b8e
makefile: added
2015-04-01 16:29:19 -04:00
661cdc5752
makefile: added
2015-04-01 16:29:18 -04:00
0275f5575b
makefile: added
2015-04-01 16:29:17 -04:00
b7d72a5b2e
makefile: added
2015-04-01 16:29:16 -04:00
71adb70844
makefile: added
2015-04-01 16:29:14 -04:00
1165203964
makefile: added
2015-04-01 16:29:13 -04:00
e596a1c593
makefile: added
2015-04-01 16:29:12 -04:00
6391b9aa9d
makefile: added
2015-04-01 16:29:11 -04:00
565839db38
makefile: added
2015-04-01 16:29:10 -04:00
14c36b172f
makefile: added
2015-04-01 16:29:08 -04:00
ae960e66e9
makefile: added
2015-04-01 16:29:07 -04:00
f3c151eb7c
makefile: added
2015-04-01 16:29:06 -04:00
12e9ab7bdd
makefile: added
2015-04-01 16:29:05 -04:00
4e3e26a8dd
makefile: added
2015-04-01 16:29:03 -04:00
b6d5e21133
makefile: added
2015-04-01 16:29:02 -04:00
0dc0d825a6
makefile: added
2015-04-01 16:29:01 -04:00
283427647b
makefile: added
2015-04-01 16:29:00 -04:00
61293e7231
makefile: added
2015-04-01 16:28:58 -04:00
73b31cfea0
makefile: added
2015-04-01 16:28:57 -04:00
79a07e737d
makefile: added
2015-04-01 16:28:56 -04:00
b3c666cf0d
makefile: added
2015-04-01 16:28:55 -04:00
7a505f2d81
makefile: added
2015-04-01 16:28:53 -04:00
8c25254fd7
makefile: added
2015-04-01 16:28:52 -04:00
0664fb76f0
makefile: added
2015-04-01 16:28:51 -04:00
3051afd7da
makefile: added
2015-04-01 16:28:50 -04:00
d8ca123557
makefile: added
2015-04-01 16:28:48 -04:00
88676c8c00
makefile: added
2015-04-01 16:28:47 -04:00
786690cdae
makefile: added
2015-04-01 16:28:46 -04:00
861341df2d
makefile: added
2015-04-01 16:28:44 -04:00
69e817aed7
makefile: added
2015-04-01 16:28:43 -04:00
8595341c32
makefile: added
2015-04-01 16:28:42 -04:00
1c558f23db
makefile: added
2015-04-01 16:28:41 -04:00
d5562e6a63
makefile: added
2015-04-01 16:28:39 -04:00
47331d951a
makefile: added
2015-04-01 16:28:38 -04:00
2c8939f246
makefile: added
2015-04-01 16:28:37 -04:00
9ca85e9837
makefile: added
2015-04-01 16:28:36 -04:00
4a197f532e
makefile: added
2015-04-01 16:28:34 -04:00
26f176f2b5
makefile: added
2015-04-01 16:28:33 -04:00
f330a82bb5
makefile: added
2015-04-01 16:28:32 -04:00
544d4f579f
makefile: added
2015-04-01 16:28:30 -04:00
2fdc3d6d96
makefile: added
2015-04-01 16:28:29 -04:00
df7c64be5f
makefile: added
2015-04-01 16:28:28 -04:00
3520884406
makefile: added
2015-04-01 16:28:27 -04:00
aa1739cb3e
makefile: added
2015-04-01 16:28:25 -04:00
affa42d76a
makefile: added
2015-04-01 16:28:24 -04:00
c87268e703
makefile: added
2015-04-01 16:28:23 -04:00
4cf4349e27
makefile: added
2015-04-01 16:28:22 -04:00
98c2deaf26
imageon_zc706: Update project
...
+ Connect the Rx path to HP2
+ Enable AXI_SLICE_DEST
+ Add ILA to the dma_fifo and dma_axi_s2mm interface
+ Fix constraints
2015-04-01 18:50:18 +03:00
271a383012
ad9467_kc705: Update project to the new frame work.
2015-04-01 17:16:47 +03:00
1819a41ab5
ad9467_zed: Update project to the new framework.
2015-04-01 14:38:39 +03:00
fbfbfdaf87
motcon2_fmc: Updated to the latest framework
2015-04-01 11:45:01 +03:00
e58e9bc701
fmcomms5: Updated zc702 project to the latest framework
2015-03-31 17:44:09 +03:00
fb3ee53790
fmcomm5: Updated ZC706 project
2015-03-31 17:43:30 +03:00
92aa58826d
fmcomms5: Updated project to be compatible with both ZC702 and ZC706
2015-03-31 17:42:44 +03:00
207b9679c9
fmcomms2: miniITX project updated to the new framework
2015-03-31 16:17:58 +03:00
bf1a50ef0c
mitx: common, fixed number of gpios enabled
2015-03-31 16:16:40 +03:00
7d1c715f09
adv7511_vc707: Fix system top.
2015-03-31 11:00:48 +03:00
8f2fdec838
ad6676evb/vc707: 2014.4 updates
2015-03-30 14:59:09 -04:00
c4a7730c89
ad6676evb/vc707: 2014.4 updates
2015-03-30 14:59:09 -04:00
7f2cc2117c
ad6676evb/vc707: 2014.4 updates
2015-03-30 14:59:09 -04:00
edcc0672d2
ad6676evb/vc707: 2014.4 updates
2015-03-30 14:59:09 -04:00
7aeeaec5f4
fmcomms1: VC707 updated to the latest framework
2015-03-30 18:09:57 +03:00
89b83f8a00
fmcomms1: KC705 project updated to the latest framework
2015-03-30 18:09:17 +03:00
11379939d0
fmcjesdadc1: VC707, Updated project to the latest framework
2015-03-30 18:08:19 +03:00
c7e4ba5083
fmcjesdadc1: Updated KC705 to the latest flow
2015-03-30 18:07:47 +03:00
4f69ae19c5
adv7511_mitx045: Update latest frame work.
2015-03-30 17:54:37 +03:00
fcb163062f
adv7511 : Fix top for kcu105 and kc705
2015-03-30 16:21:38 +03:00
c00633d1ac
adv7511_ac701: Update project and common files to the new framework.
2015-03-30 15:23:26 +03:00
Lars-Peter Clausen
Adrian Costina
Rejeesh Kutty
Istvan Csomortani