Commit Graph

38 Commits (1fd5c0f28b14ae13324363e13b171404bcb04271)

Author SHA1 Message Date
Adrian Costina 9d2b8809df Makefiles: Updated Makefiles 2015-10-23 10:44:27 +03:00
Rejeesh Kutty ba70c7a4ea ad9144- ip updates 2015-09-30 11:37:10 -04:00
Istvan Csomortani 892755c084 axi_ad9144: Clock ratio is indicating a sampling clock ratio
The software can use this data to calculate the effective sampling clock, independent of the interface type.
2015-09-24 11:18:48 +03:00
Istvan Csomortani 7b858bc5ad Revert commit 6b99ce
Revert 6b99ce2482
2015-08-26 13:48:28 +03:00
Adrian Costina 6b99ce2482 library: Added common constraints for all cores. Commented code that needs to be updated to 2015.2 2015-08-20 18:17:38 +03:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Rejeesh Kutty 3101045109 qsys- library group 2015-07-17 10:07:15 -04:00
Rejeesh Kutty 60c344cea6 ad9144- qsys needs interface signal name matching 2015-07-15 15:59:51 -04:00
Rejeesh Kutty c69e36314c ad9144- remove avalon streaming 2015-07-13 10:03:16 -04:00
Istvan Csomortani 46fa91d5be Makefile: Update Make files 2015-07-03 18:08:57 +03:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
Rejeesh Kutty e2f4a4c5cf library: make preset registered for timing paths 2015-06-10 13:41:41 -04:00
Adrian Costina 8a1f4bf5f6 ad6676,ad9144,ad9152,ad9234,ad9250,ad9434,ad9467,ad9625,ad652,ad9671,ad9680,ad9739a:Set default driver value for overflow, underflow, gpio_in and dac_sync ports 2015-06-09 14:21:12 +03:00
Rejeesh Kutty e02273781f ad_rst- non lpm version 2015-06-04 10:53:12 -04:00
Rejeesh Kutty 91b0f70972 library: remove drp cntrl 2015-06-02 09:58:57 -04:00
Rejeesh Kutty c6ebab7393 library- drp moved to up clock 2015-06-01 13:39:26 -04:00
Rejeesh Kutty d7b68c39ef altera- sdc 2015-06-01 10:59:59 -04:00
Rejeesh Kutty e05ff26406 ad9144: ddata-typo 2015-05-21 14:06:09 -04:00
Rejeesh Kutty 4c6a3afc88 ad9144: missing prot. ports 2015-05-21 14:06:06 -04:00
Rejeesh Kutty 465f7dff88 library/util_jesd_align -added 2015-05-20 15:38:43 -04:00
Rejeesh Kutty da0409b5a6 library- qsys components 2015-05-20 11:51:50 -04:00
Rejeesh Kutty 9b425736ac library: altera ip modifications 2015-05-20 10:41:21 -04:00
Rejeesh Kutty 48c769d431 ad9144- add hw tcl 2015-05-12 14:40:38 -04:00
Rejeesh Kutty 553f89f59d ad9144- add hw tcl 2015-05-12 14:39:57 -04:00
Adrian Costina 3526145992 axi_ad9144: Added CDC and reset constraints 2015-04-23 10:19:43 +03:00
Adrian Costina dc2b37bd0c Makefile: Added top level Makefile. Modified behavior of clean and clean-all
Clean ran for a project will clean only the project files.
Clean-all ran for a project will clean also the library files on which the project depends.
The clean commands will only remove specific files and directories.

The top Makefile allows several options(per suggestion from jameyhicks):
make fmcomms1.zed will run "make all" in projects/fmcomms1/zed/
make clean will run "make clean" for all the projects
make clean-all will run "make clean" for all the projects and libraries
make lib will run "make all" for the library files
2015-04-17 17:22:38 +03:00
Adrian Costina 374f82e7de makefiles: The clean command for library won't remove the xml files, except for component.xml.
Updated also the dmac dependencies
2015-04-16 11:53:27 +03:00
Rejeesh Kutty 5f8e9a74ea makefile: updated 2015-04-07 16:32:01 -04:00
Adrian Costina f79a152958 Makefiles: updated all makefiles adding clean functionality 2015-04-03 11:57:54 +03:00
Rejeesh Kutty 6cff03390c makefile: added 2015-04-01 16:27:32 -04:00
Rejeesh Kutty 37b608f397 axi_ad9144: added constraints 2014-10-17 13:57:09 -04:00
Rejeesh Kutty 88a3b7f8fd library: remove all constraints for now 2014-10-07 16:59:19 -04:00
Rejeesh Kutty de33722470 up/constr: independent read/write and local constraints 2014-10-02 14:35:59 -04:00
Lars-Peter Clausen 41cc92ef49 Remove BASEADDR/HIGHADDR parameters
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Rejeesh Kutty b481df0b5f library: local constraints async groups 2014-08-14 15:09:51 -04:00
Rejeesh Kutty 1396a215e5 library: local constraints 2014-08-14 15:09:47 -04:00
Rejeesh Kutty 31abd07613 axi_ad9144: register map changes 2014-07-01 21:43:04 -04:00
Rejeesh Kutty 7efd6149f8 daq2: initial checkin 2014-06-12 15:54:25 -04:00