3a1babe366
ad9081_fmca_ebz/vck190: Reset GT with HMC7044 lock
...
Reset transceiver with a pulse
2021-10-05 14:09:51 +03:00
2562aead32
ad9081_fmca_ebz/common: Drive Rx DMA system side with DMA clock
2021-10-05 14:09:51 +03:00
8d547f31e1
ad9081_fmca_ebz/vck190: Initial version
2021-10-05 14:09:51 +03:00
6c58a8d1ab
ad9081_fmca_ebz/common: Add Versal transceiver support
2021-10-05 14:09:51 +03:00
56a25afa68
common/vck190: Initial version
2021-10-05 14:09:51 +03:00
6a681b9e8d
common/vmk180_es1: Initial version
2021-10-05 14:09:51 +03:00
833e5f0aff
common/vmk180: Initial version
2021-10-05 14:09:51 +03:00
2fec1356d6
scripts/adi_project_xilinx.tcl: VCK190 support
2021-10-05 14:09:51 +03:00
222c5782b6
scripts/adi_project_xilinx.tcl: Install ES1 board from XHUB, make project compile in batch mode
2021-10-05 14:09:51 +03:00
011c8c1f36
scripts/adi_project_xilinx.tcl: Add VMK180 & VMK180_ES1 support
2021-10-05 14:09:51 +03:00
c22f622599
scripts/adi_board.tcl: Versal support for memory interconnect and irq interconnect
2021-10-05 14:09:51 +03:00
08c2ce75fe
scripts/adi_board.tcl: Switch cpu_interconnect to SmartConnect
2021-10-05 14:09:51 +03:00
aaaba50f83
scripts/project-xilinx.mk: Update target to xsa and cleanup list
2021-10-05 14:09:51 +03:00
0a986f76b8
scripts: QUARTUS_VERSION and PRO_ISUSED can be set in system_project.tcl
2021-10-02 12:34:10 +03:00
0a3724e04c
s10soc: Update base desgin from ES to production, H-Tile version
2021-09-30 17:40:13 +03:00
5a3c3c878b
ad9213_dual_ebz: Initial commit
...
Used ADF4377 SPI configuration CPOL/CPHA 1 for increasing the reliability of the level translators
ad9213_dual_ebz/s10soc: Redesign the address layout
avl_peripheral_mm_bridge 0x0000000 0x0001FFFF
* sys_gpio_in 0x00000000
* sys_gpio_out 0x00000020
* sys_spi 0x00000040
* sys_gpio_bd 0x000000D0
* sys_id 0x000000E0
avl_mm_bridge_0 0x00040000 0x0007FFFF
* ad9213_rx_0.phy_reconfig_0 0x00000000
* ad9213_rx_0.phy_reconfig_1 0x00002000
* ad9213_rx_0.phy_reconfig_2 0x00004000
* ad9213_rx_0.phy_reconfig_3 0x00006000
* ad9213_rx_0.phy_reconfig_4 0x00008000
* ad9213_rx_0.phy_reconfig_5 0x0000A000
* ad9213_rx_0.phy_reconfig_6 0x0000C000
* ad9213_rx_0.phy_reconfig_7 0x0000E000
* ad9213_rx_0.phy_reconfig_8 0x00010000
* ad9213_rx_0.phy_reconfig_9 0x00012000
* ad9213_rx_0.phy_reconfig_10 0x00014000
* ad9213_rx_0.phy_reconfig_11 0x00016000
* ad9213_rx_0.phy_reconfig_12 0x00018000
* ad9213_rx_0.phy_reconfig_13 0x0001A000
* ad9213_rx_0.phy_reconfig_14 0x0001C000
* ad9213_rx_0.phy_reconfig_15 0x0001E000
* ad9213_rx_0.link_pll_reconfig 0x00020000
avl_mm_bridge_1 0x00080000 0x000BFFFF
* ad9213_rx_1.phy_reconfig_0 0x00000000
* ad9213_rx_1.phy_reconfig_1 0x00002000
* ad9213_rx_1.phy_reconfig_2 0x00004000
* ad9213_rx_1.phy_reconfig_3 0x00006000
* ad9213_rx_1.phy_reconfig_4 0x00008000
* ad9213_rx_1.phy_reconfig_5 0x0000A000
* ad9213_rx_1.phy_reconfig_6 0x0000C000
* ad9213_rx_1.phy_reconfig_7 0x0000E000
* ad9213_rx_1.phy_reconfig_8 0x00010000
* ad9213_rx_1.phy_reconfig_9 0x00012000
* ad9213_rx_1.phy_reconfig_10 0x00014000
* ad9213_rx_1.phy_reconfig_11 0x00016000
* ad9213_rx_1.phy_reconfig_12 0x00018000
* ad9213_rx_1.phy_reconfig_13 0x0001A000
* ad9213_rx_1.phy_reconfig_14 0x0001C000
* ad9213_rx_1.phy_reconfig_15 0x0001E000
* ad9213_rx_1.link_pll_reconfig 0x00020000
Connected directly to the h2s_lw_axi_master
* ad9213_rx_0.link_reconfig 0x000C0000
* ad9213_rx_0.link_management 0x000C4000
* ad9213_rx_1.link_reconfig 0x000C8000
* ad9213_rx_1.link_management 0x000CC000
* axi_ad9213_0.s_axi 0x000D0000
* axi_ad9213_1.s_axi 0x000D1000
* axi_ad9213_dma_0.s_axi 0x000D2000
* axi_ad9213_dma_1.s_axi 0x000D3800
2021-09-30 17:40:13 +03:00
8acf0296af
s10soc:ad_cpu_interconnect: Add an avl_address_width attribute
...
The default address space for a new bridge is 256 Kbytes. Add an
avl_address_width attribute to the ad_cpu_interoconnect porecess to
define other address space sizes if needed.
The avl_peripheral_mm_bridge will have an 128 Kbyte address space from
address 0x0000.
2021-09-30 17:40:13 +03:00
edd2956d58
data_offload: Fix util_[cu]pack offset to TDD syncs
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-30 14:45:54 +03:00
b9554a9a5a
ad9081_fmca_ebz: Integrate axi_tdd into zcu102 design
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-30 14:45:54 +03:00
58737e09ba
adi_project_intel.tcl: update quartus to 21.2
...
Update Quartus version to 21.2.0.
Signed-off-by: stefan.raus <stefan.raus@analog.com>
2021-09-30 09:53:53 +03:00
cfe0c0ced5
adi_project_xilinx.tcl, adi_ip_xilinx.tcl: update version to 2021.1
...
Update vivado version from 2020.2 to 2021.1 in projects and library scripts.
2021-09-24 12:11:11 +03:00
591a23156b
Makefiles: Update header with the appropriate license
2021-09-16 16:50:53 +03:00
b38747cefc
Make system: Be explicit in license that cover the make/build system
...
The build system is covered under a 1 Clause BSD license. Make sure
users are aware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2021-09-16 16:50:53 +03:00
1766b42a93
ad_mem_asym: Add option to control cascade layout
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-15 12:27:49 +03:00
12b7fbb3a3
scripts: Add *.gen to clean list
2021-09-14 16:44:23 +03:00
cc68bd5198
fmcjesdadc1: Update block design ( #743 )
...
Modified the project such that there is only one data path for the ADC data: deleted one of the JESD tpl instances, one of the cpack instances and one of the dma instances.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-09-08 17:19:57 +03:00
7423ecae14
data_offload: Improve external synchronization
...
This commit adds a new synthesis option to the design, that controls
whether an internal clock domain crossing will be generated. Disabling
this option allows you to use a synchronization signal that is
synchronized to the write clock domain externally, and possibly shared
between multiple devices.
The default value retains the old behavior.
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-08 11:58:01 +03:00
16a93a804b
adrv9001[intel]: Add second pair of DMAs
...
fix observations for PR
2021-09-01 15:04:14 +03:00
fec4137046
ad400xx_fmc: Parametrize board select, sampling rate and adc resolution
...
fix comments
2021-09-01 15:03:10 +03:00
b7f34f7bd9
adrv9009zu11eg & common/zcu102 : Fix zynqmp ref clock definition
...
The derived clocks of the zynqmp core are not calculated correctly due
rounding issues, instead of 100MHz the value of 99999001 is received
causing warnings during system validation.
This can be fixed/worked around with the proper reference clock
definition.
2021-08-20 10:46:09 +03:00
b354d517f5
daq2: Connected loose ad9144 dunf flag that fixes the critical warning
2021-08-20 10:38:52 +03:00
4cf53f373b
Revert "adrv9009zu11eg: Integrate data_offload"
...
This reverts commit 78999e154e
2021-08-19 21:43:09 +03:00
1f24344620
Update Quartus version to 20.4
...
Update quartus compilation tools from 20.1 to 20.4.
Remove hardcoded version from axi_adrv9001 ip.
2021-08-12 11:15:01 +03:00
b1d2a069e8
adi_make: Update bin build flow for 2020.1 tools
...
The 2020.1 Xilinx tools have a different tcl procedures to build the boot.bin
file.
This commit updates the adi_make tcl flow for the new tools. The new
process is not backwards compatible with tools older than 2020 version.
2021-08-10 17:44:30 +03:00
e9e278c898
ad9081_fmca_ebz: Remove bypass gpio
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-08-06 11:55:24 +03:00
2178191610
ad9081_fmca_ebz: Switch util_dacfifo to data_offload engine
...
Memory requirements are the same as with the dacfifo (1 MiB).
Signed-off-by: David Winter <david.winter@analog.com>
2021-08-06 11:55:24 +03:00
564ef77588
data_offload: Calculate AXI_ADDRESS_LIMIT automatically
2021-08-06 11:55:24 +03:00
c82b0fb420
data_offload: Delete fifo_dst_rlast
2021-08-06 11:55:24 +03:00
4026f2d414
daq2/zc706: PL DDR size is 1GByte
2021-08-06 11:55:24 +03:00
703cc8a17e
data_offload_bd: Calculate the address limit from the address width
2021-08-06 11:55:24 +03:00
78999e154e
adrv9009zu11eg: Integrate data_offload
2021-08-06 11:55:24 +03:00
dc910420bd
daq2: Integrate data_offload
2021-08-06 11:55:24 +03:00
4c03580156
data_offload: Add integration process for Xilinx carriers
2021-08-06 11:55:24 +03:00
f2ca956d23
pluto: Fix dunf connection
2021-08-05 18:08:12 +03:00
bbb151f9f5
adi_project_xilinx.tcl: Set default value of ADI_USE_OOC_SYNTHESIS to 1
...
In order to workaround optimization issues hit in Vivado 2020.2,
set ADI_USE_OOC_SYTHESIS variable by default to 1. This will build
projects in Out Of Context mode.
Projects can be build in Project Mode by exporting ADI_USE_OOC_SYTHESIS=n.
2021-07-29 14:06:42 +03:00
9d5de2fc21
Update Vivado version to 2020.2
...
Update vivado version to 2020.2:
- update default vivado version from 2020.1 to 2020.2
- add conditions to apply specific contraints only in Out Of Context mode.
- update DDR controler parameters for vcu118 and kcu105 dev boards
2021-07-29 14:06:42 +03:00
907b750943
ad9083: Removed FIFO and increased DMAC transfer length
2021-07-28 12:45:20 +03:00
8343c03f5c
adrv9371x: remove IOB attribute from rx and rx_os
2021-07-26 12:42:21 +01:00
1158538753
adi_board: Fix ad_connect command tracing
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-07-22 15:02:36 +03:00
796af696da
ad_fmclidar1_ebz: Remove invalid ad_connect invocations
...
This commit removes two invalid ad_connect invocations, which weren't
caught in the original tests for commit cdda184007
2021-07-22 15:02:25 +03:00
Laszlo Nagy
LIacob106
Adrian Costina
Istvan Csomortani
David Winter
stefan.raus
Robin Getz
sergiu arpadi
hotoleanudan
Mihaita Nagy
AndreiGrozav