45dae0f3d3
ad9081_fmca_ebz/common: Connect sync at TPL level
...
Reset CPACK from ADC TPL so during armed capture clear the cpack to avoid
capturing old samples.
Reset UNPACK with TPL to clear upack during armed transfers to avoid
sending old data.
2022-02-07 19:14:01 +02:00
8ec657315c
adrv9009zu11eg: Drive cpack/upack reset from TPL
2022-02-07 19:14:01 +02:00
d949936a1b
adrv9009zu11eg/common: EXT_SYNC updates
...
- Explicitly enable EXT_SYNC parameter for Rx/Obs
- Loopback manual sync for each TPL (we do not combine them yet because
it requires extra CDC logic)
2022-02-07 19:14:01 +02:00
f245448976
ad_ip_jesd204_tpl_ : Add missing dependency
2022-02-07 19:14:01 +02:00
b5092662d5
ad_ip_jesd204_tpl_adc: Refactor external sync
...
- Add EXT_SYNC option
- Gate valid while in reset
2022-02-07 19:14:01 +02:00
8c7cca4277
common/up_adc_common: Add ext sync regs
2022-02-07 19:14:01 +02:00
1b06c74919
common/up_dac_common: Add manual sync request
2022-02-07 19:14:01 +02:00
db49aa652f
common/up_dac_common: Add support for explicit disarm control
2022-02-07 19:14:01 +02:00
4e644e4e74
jesd204/ad_ip_jesd204_tpl_dac: External sync refactor
...
- Expose EXT_SYNC parameter to sw
- Add external manual sync request
- Add rst to interface
2022-02-07 19:14:01 +02:00
1ca5abc91e
common/up_xfer_cntrl: Fix transfer done timing
...
up_xfer_done should signalize when a previous control set is
transferred to the other clock domain and the current control set is latched.
If a bit from the up_data_cntrl changes, it should stay in that state until
the up_xfer_done asserts.
2022-02-07 19:14:01 +02:00
63a1233101
ad7134_fmc: Update Readme
2022-02-07 14:41:25 +02:00
4827e5eb18
ad7134_fmc: Switch offload trigger to falling ODR
2022-02-07 14:41:25 +02:00
297bed6721
ad7134_fmc: Change ODR signal to output
...
FPGA is now generating the ODR signal using axi_pwm_gen.
Both ADCs are now in slave mode.
2022-02-07 14:41:25 +02:00
b63ebca292
projects/cn0506_rmii/*: Add util_mii_to_rmii library to project
2022-02-03 10:23:12 +02:00
170ce42e3e
util_mii_to_rmii: Initial commit
2022-02-03 10:23:12 +02:00
3da9d9fcb4
pluto_ng: Initial commit
2022-02-03 09:56:13 +02:00
7dae0858b0
de10nano: changed quartus version to 20.1.1
2022-01-31 14:10:51 +02:00
38f3627695
ad_dds: Fix DDS start samples
...
When using a CLK_RATIO > 1 the first n samples(n=CLK_RATIO) after sync, are
noisy. This is because the phase accumulator data is passed to the phase to
amplitude converter, during the phase synchronization step.
2022-01-31 14:07:11 +02:00
bc5974d789
ad77681evb: Fix irq overlap
...
spi engine irq signal was overwriting fmc iic irq
2022-01-31 12:32:31 +02:00
f34b561e19
daq3: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line for the Xilinx FPGAs in the project.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-31 10:47:01 +02:00
e8ff32d6df
ad6676evb: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line for the Xilinx FPGAs in the project.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-31 10:36:31 +02:00
318523579f
ad6676evb: Update to JESD204 TPL instantiation
...
Updated the JESD204 TPL instantation of the design.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-31 10:36:31 +02:00
b26b4c00f0
ad9783: Clean-up parameters and module instances
2022-01-25 18:24:43 +02:00
9ca5ae07b2
ad9783: Add Readme.md
2022-01-25 17:16:30 +02:00
889447e900
axi_ad9361: make IODELAYCTRL insertion optional
2022-01-25 09:50:31 +02:00
bc8e7881f2
axi_dmac: Hook up ID
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2022-01-25 09:50:22 +02:00
530aca9754
daq2: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line for the Xilinx FPGAs in the project.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-20 12:54:03 +02:00
f3cf7508c8
ad9783: Update Makefile
2022-01-20 12:31:57 +02:00
4ec8797c7c
adrv9009: Parameterize JESD204 configuration values
2022-01-13 10:15:05 +02:00
9d94f21d89
scripts/adi_xilinx_device_info_enc.tcl: Change regex for vcu128
...
The regex does not match vcu128 as Ultrascale+. It matches for Ultrascale.
2022-01-12 17:32:47 +02:00
6a92bd5925
adrv9371x: Parameterize JESD204 configuration values
2022-01-12 16:05:48 +02:00
d8a418d8d0
projects/scripts/adi_board/tcl: Updated ad_xcvrcon procedure for parametrized projects
2022-01-12 16:05:18 +02:00
9d8097389c
library/jesd204/jesd204_common/pipeline_stage.v: Initialize pipeline stage register
2022-01-12 13:43:20 +02:00
fc04198b2b
adrc9361_ccfmc: Fix SFP pin locations
2022-01-12 13:43:06 +02:00
86d2467f57
fmcjesdadc1: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-12 13:28:42 +02:00
080925e8fe
library/jesd204: tpl timing bug fix
2022-01-12 10:14:55 +02:00
3d000ee6a8
ad9783_zcu102_dev: Initial commit
2022-01-07 14:04:08 +02:00
08f029c757
axi_ad9783: Initial commit
2022-01-07 14:04:08 +02:00
fcd3bfd349
util_pulse_gen: Reload registers when counter is at one
...
This patch fixes an issue where the pulse width is only updated two
periods after the current one.
Signed-off-by: David Winter <david.winter@analog.com>
2022-01-04 15:02:05 +02:00
6dddaaaa78
adrv9009zu11eg/adrv2crr_xmicrowave: Update Makefile
2021-12-22 11:33:15 +02:00
0d45f4dc94
xmicrowave: Fix typo
2021-12-17 15:44:23 +02:00
c2d960e029
axi_adrv9001: Add external sync support
...
The external sync must be synchronous to the reference clock, in order
to obtain a deterministic synchronization of the interface.
2021-12-16 15:16:30 +02:00
38c489d254
projects: set Quartus version for cyclone5, cn0506_mii and cn0506_rgmii
2021-12-15 17:13:38 +02:00
fb17147eb4
fmcadc2: Parameterize JESD204 configuration values
...
Add the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-12-10 20:54:39 +02:00
13a282d9c4
fmcadc2: Update JESD204 TPL instance
...
Updated the JESD204B transport layer instance to instantiate the new TPL IP
module.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-12-10 20:54:39 +02:00
41525f348b
axi_adrv9001/axi_adrv9001_core.v: Disable TDD and IOCTRL if second SSI interface is disabled
2021-12-08 17:31:53 +02:00
dfe153dc68
axi_adrv9001/axi_adrv9001_tdd.v: Add disable option for TDD
2021-12-08 17:31:53 +02:00
8cc0367e8f
axi_adrv9001: Hide disabled interfaces
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-12-08 17:31:53 +02:00
6a4b46ebb4
axi_adrv9001: Make Rx2 and Tx2 source synchronous interfaces optional
...
If the Rx2 and Tx2 SSI are disabled the rx1,tx2 data paths are forced to
R1 mode.
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-12-08 17:31:53 +02:00
77f3e5155b
ad9081_fmca_ebz: Fix signal length parameter
...
Corrected the length parameter for the rx_data input.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-12-08 14:29:48 +02:00
Laszlo Nagy
sergiu arpadi
alin724
AndreiGrozav
Iacob_Liviu
Dan Hotoleanu
Iulia Moldovan
Filip Gherman
David Winter
Stanca Pop