zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,862 Commits
1 Branch
0 Tags
23 MiB
Commit Graph

214 Commits (27465ce9c021532eb4d3eb3d69d870375181eae1)

Author SHA1 Message Date
Laszlo Nagy 9b50e2baa5 util_adxcvr/util_adxcvr_xch: Fix typo 2021-05-14 15:39:40 +03:00
Laszlo Nagy e1b73545e4 util_adxcvr: GTY TX phase and delay alignment circuit power down. 
Tied High when a) TX buffer bypass is not in use;
see UG578
 2021-05-14 15:39:40 +03:00
Laszlo Nagy ef69fe36db util_adxcvr: Add PPF1_CFG parameter 2021-05-14 15:39:40 +03:00
Laszlo Nagy 001e7a52b1 util_adxcvr: Add LANE_RATE parameter so it can be used for automatic constraint generation 
Add separate LANE_RATE for TX and RX
 2021-05-14 15:39:40 +03:00
Laszlo Nagy cb5e66ff9c xilinx/util_adxcvr: 204C link support for GTY4 
Set channel parameters based on link mode (1 - 204b or 2 - 204c).
 2021-05-14 15:39:40 +03:00
Laszlo Nagy 2d13b5b8cd xilinx/axi_adxcvr: Add 204C support, increase version to 17.3.a 2021-05-14 15:39:40 +03:00
Laszlo Nagy cdd6c92357 xilinx/axi_adxcvr: Increase version to 17.02.a to show PRBS capability 2021-03-22 10:17:10 +02:00
Laszlo Nagy 5f2681314f xilinx/axi_adxcvr/axi_adxcvr_up: Fix force error control bit 2021-03-22 10:17:10 +02:00
Laszlo Nagy 6f4053f3b0 util_adxcvr: Fix PRBS synchroniser typo 
The control lines for TX PRBS must be synchronized using the TX clock.
 2021-01-29 14:01:25 +02:00
Laszlo Nagy 14307856ea xilinx:adxcvr: PRBS support 
The new REG_PRBS_CNTRL and REG_PRBS_STATUS registers expose controls of internal
PRBS generators and checkers allowing the testing the multi-gigabit serial link
at the physical layer without the need of the link layer bringup.
 2021-01-12 13:40:42 +02:00
Adrian Costina 9093a8c428 library: Move ad_iobuf to the common library, as it's not Xilinx specific 
Updated all system_project and Makefiles
 2020-11-02 16:13:35 +02:00
Laszlo Nagy 4e438261aa ad_serdes_out: Add CMOS support 2020-08-07 08:31:19 +03:00
Laszlo Nagy 837475db0d ad_serdes_in: Add CMOS support 2020-08-07 08:31:19 +03:00
Laszlo Nagy e6b9e21ad1 ad_serdes_out: Add tristate option 2020-08-07 08:31:19 +03:00
Laszlo Nagy c5c772127d up_delay_cntrl:ad_serdes_in: Make delay value width parametrizable 
US/US+ devices have IDELAY/ODELAY with 512 taps. This requires wider
control value for delay selection. 9 bits contrary to 5 on 7series.
 2020-08-07 08:31:19 +03:00
Laszlo Nagy 37d378c753 common/ad_serdes_out.v: Add US/US+ support 2020-08-07 08:31:19 +03:00
Laszlo Nagy 65d39b9164 common/ad_serdes_in.v: Add US/US+ support 2020-08-07 08:31:19 +03:00
Laszlo Nagy cf145ca961 axi_adxcvr: Reset status if PLL lock is lost 
In case something happens with the reference clock of the CPLL or QPLL,
they might lose the locking. The status should reflect that.
 2020-07-31 11:43:41 +03:00
Istvan Csomortani 32eeedb660 makefile: Update makefiles 2020-05-07 08:41:49 +01:00
Laszlo Nagy 8af5f65ff2 util_adxcvr: enable EyeScan for GTY4 2020-03-10 18:17:38 +02:00
Adrian Costina 0d4aa7c01e axi_dacfifo: Allow datawidths larger than the AXI datawidth 2020-02-18 11:19:02 +02:00
Laszlo Nagy ea06fcd7b6 util_adxcvr: add GTY4 parameters for 15.5Gbps lanerate 2020-02-10 09:48:17 +02:00
Laszlo Nagy 253b1149ad library/xilinx/util_adxcvr: merge GTY and GTH prefixed parameter 
parameters with same names were duplicated with transceiver specific
names due different default values.
This does not scales very well.

Use same name for the parameters as for other parameters and do the
default value handling in the IP configuration layer.
 2020-02-10 09:48:17 +02:00
Arpadi 80a77b1e1b ad_rst_constr: Added the quiet option 
critical warnings were caused by this file when the ad_rst.v instantiation
was done using generate depending on a parameter (i.e. axi_spi_engine)
 2020-01-20 15:26:48 +02:00
Arpadi 53cb087b9c ad_rst_constr: changed hier to hierarchical 2020-01-13 12:25:23 +02:00
Istvan Csomortani d2d7f2a3f9 up_clk_mon_constr: -heir is deprecated, use hierarchical instead 2020-01-13 12:25:23 +02:00
Istvan Csomortani 87a752e242 ad_rst_constr: Search pin in all hierarchy 2020-01-13 12:25:23 +02:00
Arpadi 3235c9189c axi_xcvrlb: added new parameters to IP 
added PLL locked reg to axi regmap; IP now recognizez xcvr type
automatically
 2020-01-07 16:18:33 +02:00
Adrian Costina 39d19ef401 util_adxcvr: Add additional parameters allowing for GTH4 RX 15Gbps rates 2019-11-11 14:46:09 +02:00
Istvan Csomortani aa5fdf903e Makefile: Update makefiles 2019-08-26 16:58:01 +03:00
Adrian Costina f2d2092297 axi_dacfifo: Add don't touch for the constraints to apply 2019-08-01 18:15:45 +03:00
Arpadi fe09acaa2f up_axi_update: ADDRESS_WIDTH parameter is now a localparam 
ADDRESS_WIDTH is now AXI_ADDRESS_WIDTH - 2;
up_axi instantiations will set AXI_ADDRESS_WIDTH instead of ADDRESS_WIDTH;
 2019-07-26 11:58:58 +03:00
Istvan Csomortani 04ce10a570 cosmetics: Change Altera to Intel in comments 2019-06-29 06:53:51 +03:00
Istvan Csomortani b0fbe1bb57 util_clkdiv: Seperate the IP source into an intel and xilinx version 2019-06-29 06:53:51 +03:00
Istvan Csomortani 363494ab9c library/scripts: Rename adi_ip.tcl to adi_ip_xilinx.tcl 2019-06-29 06:53:51 +03:00
Adrian Costina 81bcf9f6fc util_adxcvr: Cleanup whitespaces for GTY4 instantiations 2019-06-25 15:35:49 +03:00
Istvan Csomortani 20b0c92a1f iodelay: Expose the REFCLK_FREQUENCY parameter 2019-06-11 18:13:06 +03:00
Istvan Csomortani 70b7d69ff8 whitespace: Delete all trailing white spaces 2019-06-07 10:20:15 +03:00
Adrian Costina a0d738e1a9 util_adxcvr: Add GTH parameters for line rate of 15Gbps 2019-05-24 11:05:36 +03:00
Laszlo Nagy f45408d6a9 util_adxcvr: Expose GTY4 parameters required for 15Gbps link 
These parameters must be overwritten when the link is at 15Gbps.
The parameters have a GTY4_ prefix since the same parameters are shared
between GTY4 and GTH4 having different default values.
 2019-05-09 15:33:15 +03:00
Istvan Csomortani 42d2738a30 axi/util_adxcvr: Add GTYE4 transceiver support 2019-04-12 16:19:54 +03:00
AndreiGrozav 23841478c6 Remove library/scripts/common_bd.tcl 
Remove the script from the file list of the IPs that previously used it.
axi_clkgen: Add independent adi_auto_assign_device_spec proc
 2019-04-09 16:07:14 +03:00
AndreiGrozav 7dcaaea04e library: Update scripts/adi_ad_ip.tcl and IPs 
Fix library makefiles dep list using generic vendor info reg

Combine adi_int_bd_tcl with adi_auto_fill_bd_tcl procedure.
This change will simplify the process of generating makefiles for each library.
Removing the bd.tcl script from the adi_ip_files list will remove it from the
make dependency list.
 2019-04-09 16:07:14 +03:00
AndreiGrozav 4ae5a6d3d8 library/IPs: Auto-generate bd.tcl Update 
Remove all bd.tcl and respecting the previous commit, update *_ip.tcl to
auto-generate bd.tcl for:

  - axi_ad5766/axi_ad5766_ip.tcl
  - axi_ad6676/axi_ad6676_ip.tcl
  - axi_ad9122/axi_ad9122_ip.tcl
  - axi_ad9144/axi_ad9144_ip.tcl
  - axi_ad9152/axi_ad9152_ip.tcl
  - axi_ad9162/axi_ad9162_ip.tcl
  - axi_ad9250/axi_ad9250_ip.tcl
  - axi_ad9265/axi_ad9265_ip.tcl
  - axi_ad9361/axi_ad9361_ip.tcl
  - axi_ad9371/axi_ad9371_ip.tcl
  - axi_ad9434/axi_ad9434_ip.tcl
  - axi_ad9467/axi_ad9467_ip.tcl
  - axi_ad9625/axi_ad9625_ip.tcl
  - axi_ad9671/axi_ad9671_ip.tcl
  - axi_ad9680/axi_ad9680_ip.tcl
  - axi_ad9684/axi_ad9684_ip.tcl
  - axi_ad9739a/axi_ad9739a_ip.tcl
  - axi_ad9963/axi_ad9963_ip.tcl
  - axi_adrv9009/axi_adrv9009_ip.tcl
  - axi_fmcadc5_sync/axi_fmcadc5_sync_ip.tcl
  - axi_hdmi_tx/axi_hdmi_tx_ip.tcl
  - xilinx/axi_adxcvr/Makefile
  - xilinx/axi_adxcvr/axi_adxcvr_ip.tcl
  - xilinx/util_adxcvr/Makefile
  - xilinx/util_adxcvr/util_adxcvr_ip.tcl
 2019-03-30 11:26:11 +02:00
AndreiGrozav 66823682b6 Add FPGA info parameters flow 
Common basic steps:
- Include/create infrastructure:

   * Intel:
       - require quartus::device package
       - set_module_property VALIDATION_CALLBACK info_param_validate

   * Xilinx
       - add bd.tcl, containing init{} procedure. The init procedure will be
         called when the IP will be instantiated into the block design.
       - add to the xilinx_blockdiagram file group the bd.tcl and common_bd.tcl
       - create GUI files

- add parameters in *_ip.tcl and *_hw.tcl (adi_add_auto_fpga_spec_params)
- add/propagate the info parameters through the IP verilog files

axi_clkgen
util_adxcvr
ad_ip_jesd204_tpl_adc
ad_ip_jesd204_tpl_dac
axi_ad5766
axi_ad6676
axi_ad9122
axi_ad9144
axi_ad9152
axi_ad9162
axi_ad9250
axi_ad9265
axi_ad9680
axi_ad9361
axi_ad9371
axi_adrv9009
axi_ad9739a
axi_ad9434
axi_ad9467
axi_ad9684
axi_ad9963
axi_ad9625
axi_ad9671
axi_hdmi_tx
axi_fmcadc5_sync
 2019-03-30 11:26:11 +02:00
Istvan Csomortani 04af519af8 axi_adxcvr: Re-indent ports 2019-03-21 14:30:39 +02:00
Istvan Csomortani 845c369c6b axi_adcvr: Add initial value for reg port definition 2019-03-21 14:30:39 +02:00
Istvan Csomortani 8996044978 axi_adxcvr: Fix warning related to up_es_reset 
Fix the following warning:

WARNING: [Synth 8-2611] redeclaration of ANSI port up_es_reset is not allowed

Also make sure, that in all configurations, the register has a diver.
 2019-03-21 14:30:39 +02:00
Adrian Costina 47f7894881 util_adxcvr: Initial commit for QPLL1 support (GTH3 and GTH4) 2019-02-11 17:20:08 +02:00
Laszlo Nagy 3d7a376f8b Makefile: update makefiles 2018-12-21 17:32:48 +02:00